If the i2c-hid device was runtime suspended and then the system
suspended itself we'd end up disabling interrupts twice (in
i2c_hid_runtime_suspend and i2c_hid_suspend) and not reenabling them
until later when the i2c-hid device was runtime resumed.
Unfortunately the i2c_hid_resume() calls i2c_hid_hwreset() and that
only works properly if interrupts are enabled.

We can fix this by taking the advice from "runtime_pm.txt".
Specifically we'll change i2c-hid to always resume to full power.
This only works if our parents are also resumed to full power, but
given the suggestion in "runtime_pm.txt" this seems a reasonable
assumption.

Signed-off-by: Doug Anderson <diand...@chromium.org>
---
Note that this was tested on a 3.14 kernel with backports.  Any
testing that folks can do on ToT is appreciated.

Changes in v2:
- Move pm_runtime_enable() higher in resume

 drivers/hid/i2c-hid/i2c-hid.c | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c
index ab4dd95..9e013f6 100644
--- a/drivers/hid/i2c-hid/i2c-hid.c
+++ b/drivers/hid/i2c-hid/i2c-hid.c
@@ -1090,15 +1090,18 @@ static int i2c_hid_suspend(struct device *dev)
        struct hid_device *hid = ihid->hid;
        int ret = 0;
 
-       disable_irq(ihid->irq);
-       if (device_may_wakeup(&client->dev))
-               enable_irq_wake(ihid->irq);
+       if (!pm_runtime_suspended(dev)) {
+               /* Save some power */
+               i2c_hid_set_power(client, I2C_HID_PWR_SLEEP);
+
+               disable_irq(ihid->irq);
+       }
 
        if (hid->driver && hid->driver->suspend)
                ret = hid->driver->suspend(hid, PMSG_SUSPEND);
 
-       /* Save some power */
-       i2c_hid_set_power(client, I2C_HID_PWR_SLEEP);
+       if (device_may_wakeup(&client->dev))
+               enable_irq_wake(ihid->irq);
 
        return ret;
 }
@@ -1110,6 +1113,11 @@ static int i2c_hid_resume(struct device *dev)
        struct i2c_hid *ihid = i2c_get_clientdata(client);
        struct hid_device *hid = ihid->hid;
 
+       /* We'll resume to full power */
+       pm_runtime_disable(dev);
+       pm_runtime_set_active(dev);
+       pm_runtime_enable(dev);
+
        enable_irq(ihid->irq);
        ret = i2c_hid_hwreset(client);
        if (ret)
-- 
2.2.0.rc0.207.ga3a616c

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to