> As the DT bindings don't have an operating-points property any more,
> build the OPP table from the frequencies supported by the EMC clock.
> 
> Signed-off-by: Tomeu Vizoso <tomeu.viz...@collabora.com>
> ---
>  drivers/devfreq/tegra-devfreq.c | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/devfreq/tegra-devfreq.c b/drivers/devfreq/tegra-devfreq.c
> index 5a6164c..1de3f8b 100644
> --- a/drivers/devfreq/tegra-devfreq.c
> +++ b/drivers/devfreq/tegra-devfreq.c
> @@ -618,6 +618,7 @@ static int tegra_devfreq_probe(struct platform_device 
> *pdev)
>       struct tegra_devfreq_device *dev;
>       struct resource *res;
>       unsigned int i;
> +     unsigned long rate;
>       int irq;
>       int err;
>  
> @@ -649,12 +650,6 @@ static int tegra_devfreq_probe(struct platform_device 
> *pdev)
>               return PTR_ERR(tegra->emc_clock);
>       }
>  
> -     err = of_init_opp_table(&pdev->dev);
> -     if (err) {
> -             dev_err(&pdev->dev, "Failed to init operating point table\n");
> -             return err;
> -     }
> -
>       clk_set_rate(tegra->emc_clock, ULONG_MAX);
>  
>       tegra->rate_change_nb.notifier_call = tegra_actmon_rate_notify_cb;
> @@ -691,6 +686,11 @@ static int tegra_devfreq_probe(struct platform_device 
> *pdev)
>               tegra_actmon_configure_device(tegra, dev);
>       }
>  
> +     for (rate = 0; rate <= tegra->max_freq * KHZ; rate++) {
> +             rate = clk_round_rate(tegra->emc_clock, rate);
> +             dev_pm_opp_add(&pdev->dev, rate, 0);
> +     }
> +

Although I am not going to NACK for the single-time performance of a
single device driver for a device that I do not have or fully understand,
please note that you may be wasting several billion cycles unless
your product is running at MHZ/kHZ level.

What is going on with this loop? Do you really have such a virtually-continuous
frequency scaling in your product? (Wow.... but in such a case, I don't think
OPP is appropriate.)


Cheers,
MyungJoo


>       irq = platform_get_irq(pdev, 0);
>       if (irq <= 0) {
>               dev_err(&pdev->dev, "Failed to get IRQ\n");
> -- 
> 2.1.0
> 
N�����r��y����b�X��ǧv�^�)޺{.n�+����{����zX����ܨ}���Ơz�&j:+v�������zZ+��+zf���h���~����i���z��w���?�����&�)ߢf��^jǫy�m��@A�a���
0��h���i

Reply via email to