This adds documentation of device tree bindings for the
STM32 USART

Tested-by: Chanwoo Choi <cw00.c...@samsung.com>
Signed-off-by: Maxime Coquelin <mcoquelin.st...@gmail.com>
---
 .../devicetree/bindings/serial/st,stm32-usart.txt  | 32 ++++++++++++++++++++++
 1 file changed, 32 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/serial/st,stm32-usart.txt

diff --git a/Documentation/devicetree/bindings/serial/st,stm32-usart.txt 
b/Documentation/devicetree/bindings/serial/st,stm32-usart.txt
new file mode 100644
index 0000000..090a3a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/st,stm32-usart.txt
@@ -0,0 +1,32 @@
+* STMicroelectronics STM32 USART
+
+Required properties:
+- compatible: Can be either "st,stm32-usart" or "st,stm32-uart" depending on
+whether the device supports synchronous mode.
+- reg: The address and length of the peripheral registers space
+- interrupts: The interrupt line of the USART instance
+- clocks: The input clock of the USART instance
+
+Optional properties:
+- pinctrl: The reference on the pins configuration
+- st,hw-flow-ctrl: bool flag to enable hardware flow control.
+
+Examples:
+usart4: serial@40004c00 {
+       compatible = "st,stm32-uart";
+       reg = <0x40004c00 0x400>;
+       interrupts = <52>;
+       clocks = <&clk_pclk1>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usart4>;
+};
+
+usart2: serial@40004400 {
+       compatible = "st,stm32-usart", "st,stm32-uart";
+       reg = <0x40004400 0x400>;
+       interrupts = <38>;
+       clocks = <&clk_pclk1>;
+       st,hw-flow-ctrl;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usart2 &pinctrl_usart2_rtscts>;
+};
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to