STM32 MCUs feature 16 and 32 bits general purpose timers with prescalers.
The drivers detects whether the time is 16 or 32 bits, and applies a
1024 prescaler value if it is 16 bits.

Reviewed-by: Linus Walleij <linus.wall...@linaro.org>
Tested-by: Chanwoo Choi <cw00.c...@samsung.com>
Signed-off-by: Maxime Coquelin <mcoquelin.st...@gmail.com>
---
 drivers/clocksource/Kconfig       |   8 ++
 drivers/clocksource/Makefile      |   1 +
 drivers/clocksource/timer-stm32.c | 184 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 193 insertions(+)
 create mode 100644 drivers/clocksource/timer-stm32.c

diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index b82e58b..519304b 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -101,6 +101,14 @@ config CLKSRC_EFM32
          Support to use the timers of EFM32 SoCs as clock source and clock
          event device.
 
+config CLKSRC_STM32
+       bool "Clocksource for STM32 SoCs" if !ARCH_STM32
+       depends on OF && ARM && (ARCH_STM32 || COMPILE_TEST)
+       select CLKSRC_MMIO
+       default ARCH_STM32
+       help
+         Support to use the timers of STM32 SoCs as clock event device.
+
 config ARM_ARCH_TIMER
        bool
        select CLKSRC_OF if OF
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 1c9a643..525dafe 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -35,6 +35,7 @@ obj-$(CONFIG_ARCH_NSPIRE)     += zevio-timer.o
 obj-$(CONFIG_ARCH_BCM_MOBILE)  += bcm_kona_timer.o
 obj-$(CONFIG_CADENCE_TTC_TIMER)        += cadence_ttc_timer.o
 obj-$(CONFIG_CLKSRC_EFM32)     += time-efm32.o
+obj-$(CONFIG_CLKSRC_STM32)     += timer-stm32.o
 obj-$(CONFIG_CLKSRC_EXYNOS_MCT)        += exynos_mct.o
 obj-$(CONFIG_CLKSRC_SAMSUNG_PWM)       += samsung_pwm_timer.o
 obj-$(CONFIG_FSL_FTM_TIMER)    += fsl_ftm_timer.o
diff --git a/drivers/clocksource/timer-stm32.c 
b/drivers/clocksource/timer-stm32.c
new file mode 100644
index 0000000..fad2e2e
--- /dev/null
+++ b/drivers/clocksource/timer-stm32.c
@@ -0,0 +1,184 @@
+/*
+ * Copyright (C) Maxime Coquelin 2015
+ * Author:  Maxime Coquelin <mcoquelin.st...@gmail.com>
+ * License terms:  GNU General Public License (GPL), version 2
+ *
+ * Inspired by time-efm32.c from Uwe Kleine-Koenig
+ */
+
+#include <linux/kernel.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/clk.h>
+#include <linux/reset.h>
+
+#define TIM_CR1                0x00
+#define TIM_DIER       0x0c
+#define TIM_SR         0x10
+#define TIM_EGR                0x14
+#define TIM_PSC                0x28
+#define TIM_ARR                0x2c
+
+#define TIM_CR1_CEN    BIT(0)
+#define TIM_CR1_OPM    BIT(3)
+#define TIM_CR1_ARPE   BIT(7)
+
+#define TIM_DIER_UIE   BIT(0)
+
+#define TIM_SR_UIF     BIT(0)
+
+#define TIM_EGR_UG     BIT(0)
+
+struct stm32_clock_event_ddata {
+       struct clock_event_device evtdev;
+       unsigned periodic_top;
+       void __iomem *base;
+};
+
+static void stm32_clock_event_set_mode(enum clock_event_mode mode,
+                                      struct clock_event_device *evtdev)
+{
+       struct stm32_clock_event_ddata *data =
+               container_of(evtdev, struct stm32_clock_event_ddata, evtdev);
+       void *base = data->base;
+
+       switch (mode) {
+       case CLOCK_EVT_MODE_PERIODIC:
+               writel_relaxed(data->periodic_top, base + TIM_ARR);
+               writel_relaxed(TIM_CR1_ARPE | TIM_CR1_CEN, base + TIM_CR1);
+               break;
+
+       case CLOCK_EVT_MODE_ONESHOT:
+       default:
+               writel_relaxed(0, base + TIM_CR1);
+               break;
+       }
+}
+
+static int stm32_clock_event_set_next_event(unsigned long evt,
+                                           struct clock_event_device *evtdev)
+{
+       struct stm32_clock_event_ddata *data =
+               container_of(evtdev, struct stm32_clock_event_ddata, evtdev);
+
+       writel_relaxed(evt, data->base + TIM_ARR);
+       writel_relaxed(TIM_CR1_ARPE | TIM_CR1_OPM | TIM_CR1_CEN,
+                      data->base + TIM_CR1);
+
+       return 0;
+}
+
+static irqreturn_t stm32_clock_event_handler(int irq, void *dev_id)
+{
+       struct stm32_clock_event_ddata *data = dev_id;
+
+       writel_relaxed(0, data->base + TIM_SR);
+
+       data->evtdev.event_handler(&data->evtdev);
+
+       return IRQ_HANDLED;
+}
+
+static struct stm32_clock_event_ddata clock_event_ddata = {
+       .evtdev = {
+               .name = "stm32 clockevent",
+               .features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
+               .set_mode = stm32_clock_event_set_mode,
+               .set_next_event = stm32_clock_event_set_next_event,
+               .rating = 200,
+       },
+};
+
+static void __init stm32_clockevent_init(struct device_node *np)
+{
+       struct stm32_clock_event_ddata *data = &clock_event_ddata;
+       struct clk *clk;
+       struct reset_control *rstc;
+       unsigned long rate, max_delta;
+       int irq, ret, bits, prescaler = 1;
+
+       clk = of_clk_get(np, 0);
+       if (IS_ERR(clk)) {
+               ret = PTR_ERR(clk);
+               pr_err("failed to get clock for clockevent (%d)\n", ret);
+               goto err_clk_get;
+       }
+
+       ret = clk_prepare_enable(clk);
+       if (ret) {
+               pr_err("failed to enable timer clock for clockevent (%d)\n",
+                      ret);
+               goto err_clk_enable;
+       }
+
+       rate = clk_get_rate(clk);
+
+       rstc = of_reset_control_get(np, NULL);
+       if (!IS_ERR(rstc)) {
+               reset_control_assert(rstc);
+               reset_control_deassert(rstc);
+       }
+
+       data->base = of_iomap(np, 0);
+       if (!data->base) {
+               pr_err("failed to map registers for clockevent\n");
+               goto err_iomap;
+       }
+
+       irq = irq_of_parse_and_map(np, 0);
+       if (!irq) {
+               pr_err("%s: failed to get irq.\n", np->full_name);
+               goto err_get_irq;
+       }
+
+       /* Detect whether the timer is 16 or 32 bits */
+       writel_relaxed(~0UL, data->base + TIM_ARR);
+       max_delta = readl_relaxed(data->base + TIM_ARR);
+       if (max_delta == ~0UL) {
+               prescaler = 1;
+               bits = 32;
+       } else {
+               prescaler = 1024;
+               bits = 16;
+       }
+       writel_relaxed(0, data->base + TIM_ARR);
+
+       writel_relaxed(prescaler - 1, data->base + TIM_PSC);
+       writel_relaxed(TIM_EGR_UG, data->base + TIM_EGR);
+       writel_relaxed(TIM_DIER_UIE, data->base + TIM_DIER);
+       writel_relaxed(0, data->base + TIM_SR);
+
+       data->periodic_top = DIV_ROUND_CLOSEST(rate, prescaler * HZ);
+
+       clockevents_config_and_register(&data->evtdev,
+                                       DIV_ROUND_CLOSEST(rate, prescaler),
+                                       0x1, max_delta);
+
+       ret = request_irq(irq, stm32_clock_event_handler, IRQF_TIMER,
+                       "stm32 clockevent", data);
+       if (ret) {
+               pr_err("%s: failed to request irq.\n", np->full_name);
+               goto err_get_irq;
+       }
+
+       pr_info("%s: STM32 clockevent driver initialized (%d bits)\n",
+                       np->full_name, bits);
+
+       return;
+
+err_get_irq:
+       iounmap(data->base);
+err_iomap:
+       clk_disable_unprepare(clk);
+err_clk_enable:
+       clk_put(clk);
+err_clk_get:
+       return;
+}
+
+CLOCKSOURCE_OF_DECLARE(stm32, "st,stm32-timer", stm32_clockevent_init);
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to