At Thu, 9 Apr 2015 09:34:05 +0800, Raymond Yau wrote: > > > > > > > Taylor Smock wrote: > > > > > > > > > > > > > > Yes; reverting the patch does fix the problem. > > > > > > > > > > > > What if you just adjust the new volume manually without > > > > > > reverting the > > > > > > patch? Run "alsamixer -c0" (or -c1, depending on the setup). > > > > > > Once > > > > > > after the setup, run "alsactl store" as root to save as the > > > > > > system > > > > > > default volume. > > > > > > > > > > > > The renamed volume should have been set in full volume as > > > > > > default by > > > > > > the driver, and this shouldn't matter whether PA is new or old. > > > > > > If > > > > > > the mixer adjustment isn't kept after relogin or reboot, it > > > > > > means > > > > > > that > > > > > > some user-space stuff overrides it. > > > > > > > > > > > > In anyway, please give alsa-info.sh output before and after the > > > > > > commit. > > > > > > > > > > > > > > > > > > Takashi > > > > > > > > > > > > > On Wed, 2015-04-08 at 01:56 +0300, Dan Carpenter wrote: > > > > > > > > So it's 03ad6a8c93b6df2 ('ALSA: hda - Fix "PCM" name being > > > > > > > > used > > > > > > > > on > one > > > > > > > > DAC when there are two DACs') which causes the problem? > > > > > > > > Have > > > > > > > > you > > > > > > > > tried > > > > > > > > to just revert that patch? > > > > > > > > > > > > > > > > git show 03ad6a8c93b6df2d65c305b5b5f9474068b45bfb | patch - > > > > > > > > p1 -R > > > > > > > > > > > > > > > > regards, > > > > > > > > dan carpenter > > > > > > > > > > > > > > > > > > > > > > > > > I ran alsamixer -c0. > > > > > Headphones did nothing. > > > > > Speaker+L0 did change headphone volume. > > > > > > > > Please elaborate a bit what you're testing and what you expected. > > > > When you change "Headphone" volume and mute, it did nothing for which > > > > output? "Speaker+LO" changes which output and which not? > > > > > > > > You seem to have three outputs, one headphone jack on a laptop and > > > > one > > > > on a docking station, and there is a built-in speaker. Since your > > > > codec has only two DACs, two of three must be tied. > > > > > > > > The bad thing is that BIOS pin configuration doesn't set the > > > > headphone > > > > pin with the associate number 0x0f but only set it to the dock > > > > headphone. Thus the driver assumes that the dock jack is the right > > > > headphone and handles the laptop headphone as a sub output. > > > > The commit you spotted took this difference more severely, and now > > > > you > > > > see the unexpected mixer assignment. > > > > > > > > So, the right "fix" would be rather to correct the pin config. > > > > For example, try the patch below. > > > > > > > > (BTW, what is the product of your laptop model? A more exact name > > > > can > > > > be filled in the quirk string.) > > > > > > > > > PCM also seemed to affect headphone volume. > > > > > > > > This is a mixer element added by alsa-lib softvol plugin, and it's > > > > not > > > > what the kernel manages. > > > > > > > > Judging from the description that this PCM volume affects, you are > > > > playing without PulseAudio but dmix, I suppose? > > > > > > > > > > > > Takashi > > > > > > > > diff --git a/sound/pci/hda/patch_realtek.c > > > > b/sound/pci/hda/patch_realtek.c > > > > index 7b5c93e0e78c..9d935e5c008a 100644 > > > > --- a/sound/pci/hda/patch_realtek.c > > > > +++ b/sound/pci/hda/patch_realtek.c > > > > @@ -4429,6 +4429,7 @@ enum { > > > > ALC269_FIXUP_QUANTA_MUTE, > > > > ALC269_FIXUP_LIFEBOOK, > > > > ALC269_FIXUP_LIFEBOOK_EXTMIC, > > > > + ALC269_FIXUP_FUJITSU_HP_PIN, > > > > ALC269_FIXUP_AMIC, > > > > ALC269_FIXUP_DMIC, > > > > ALC269VB_FIXUP_AMIC, > > > > @@ -4585,6 +4586,13 @@ static const struct hda_fixup alc269_fixups[] > > > > = { > > > > { } > > > > }, > > > > }, > > > > + [ALC269_FIXUP_FUJITSU_HP_PIN] = { > > > > + .type = HDA_FIXUP_PINS, > > > > + .v.pins = (const struct hda_pintbl[]) { > > > > + { 0x21, 0x0221102f }, /* HP out */ > > > > + { } > > > > + }, > > > > + }, > > > > Do you mind explaining the logic of this pin fixup as driver also change > max channels from 2 to 4 ? > > The parser put one headphone in the line_outs before your patch but type is > still line > > autoconfig for ALC269VB: line_outs=1 (0x21/0x0/0x0/0x0/0x0) type:line > speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) > hp_outs=1 (0x1a/0x0/0x0/0x0/0x0) > mono: mono_out=0x0 > inputs: > Internal Mic=0x12 > Mic=0x18 > > the headphone and dock headphone was put in the hp_outsafter your patch > > autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker > speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) > hp_outs=2 (0x1a/0x21/0x0/0x0/0x0) > mono: mono_out=0x0 > inputs: > Internal Mic=0x12 > Mic=0x18 > > > Do the driver need to distinguish between > > notebook with headphone and Dock headphone > notebook with dual headphone jacks
The former is handled when the dock headphone is a kind of line-out. Now we handle this laptop as the latter, which fits better in the case of two DACs. Takashi -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/