On Fri, Apr 10, 2015 at 01:15:29PM -0700, Matthew Garrett wrote: > Intel publish a document on designing energy efficient SATA devices at > http://www.intel.com/content/dam/doc/reference-guide/sata-devices-implementation-recommendations.pdf > which recommends that ALPE be set, ASPE be cleared and that DIPM be enabled > on the device. Right now we have no policy that matches that - medium_power > does not enable DIPM and min_power sets ASPE. Add a new low_power policy to > implement these recommendations. I've left devslp disabled because I'm not > yet sure what Intel do in that case. With luck this will provide reasonable > power savings without causing the device breakages we occasionally see with > the min_power policy.
I suspect the aggressive methods actually don't buy us much, except for the obsessive mode switchings, in terms of power saving compared to something more reasonable provided via DIPM and I'm not sure it's a good idea to introduce yet another mode. I'd be all in for converting min_power mode to DIPM for cases where we know this actually works rather than introducing yet another mode. Or if there's a clear power consumption disadvantage to DIPM, let's conver medium_power to that. Thanks. -- tejun -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
