> From: Hansen, Dave
> Sent: Wednesday, April 22, 2015 12:34 PM
> To: Yu, Fenghua; H. Peter Anvin; Ingo Molnar; Thomas Gleixner; Mallick, Asit
> K; Williamson, Glenn P
> Cc: linux-kernel; x86
> Subject: Re: [PATCH Bugfix v2 2/4] x86/xsaves: Define and use
> user_xstate_size for xstate size in signal context
>
> On 04/22/2015 12:05 PM, Yu, Fenghua wrote:
> >> From: Hansen, Dave
> >> Sent: Wednesday, April 22, 2015 11:45 AM
> >> To: Yu, Fenghua; H. Peter Anvin; Ingo Molnar; Thomas Gleixner;
> >> Mallick, Asit K; Williamson, Glenn P
> >> Cc: linux-kernel; x86
> >> Subject: Re: [PATCH Bugfix v2 2/4] x86/xsaves: Define and use
> >> user_xstate_size for xstate size in signal context
> >>
> >> On 04/21/2015 09:51 PM, Fenghua Yu wrote:
> >>> + /*
> >>> + * Copy rest of xstates in compact format to user.
> >>> + */
> >>> + for (i = 2; i < xstate_features; i++) {
> >>> + if (test_bit(i, (unsigned long *)&pcntxt_mask)) {
> >>> + int user_offset, kernel_offset;
> >>> + int size;
> >>> +
> >>> + user_offset = xstate_offsets[i];
> >>> + kernel_offset = xstate_comp_offsets[i];
> >>> + size = xstate_sizes[i];
> >>> +
> >>> + if (__copy_to_user(buf_fx + user_offset,
> >>> + xsave + kernel_offset, size))
> >>> + return -1;
> >>> + }
> >>> + }
> >>
> >> Is this checking the right bitmap?
> >>
> >> The 'xsaves' documentation says: "If RFBM[i] = 1, XSTATE_BV[i] is set
> >> to the value of XINUSE[i]". Where "XINUSE denotes the
> >> state-component bitmap corresponding to the init optimization".
> >>
> >> So shouldn't this be checking xsave->xsave_hdr.xstate_bv instead of
> >> pcntxt_mask? The will be equal unless the "init optimization" is in play.
> >
> > Xsave->xsave_hdr.xstate_bv is equal to pcntxt_mask (see
> setup_init_fpu_buf()).
>
> No. I don't think it works this way. xsaves *WRITES* to the XSTATE_BV[]
> field in addition to reading it. According to the SDM:
> "execution of XSAVES writes the XSTATE_BV field of the XSAVE header (see
> Section 13.4.2), setting XSTATE_BV[i] (0 ≤ i ≤ 63) as follows...
> Execution of XSAVES performs the init optimization to reduce the amount of
> data written to memory. If XINUSE[i] = 0, state component i is not saved to
> the XSAVE area (even if RFBM[i] = 1)".
>
> > And here XINUSE and RFBM are irrelevant because they are used in init
> > or modified optimization during xsave*/xrstore*. We only copy out the
> > xstates from kernel to user and XINUSE and RFBM are not in scope here.
>
> I think they are in use. The kernel created its buffer with 'xsaves' so when
> it
> is reading the buffer it needs to take those optimizations in to
> consideration.
>
We need to copy ALL of supported xstates to user. Using xstate_bv only copies
partial xstates that are in non-init status.
Xstate_bv only has xstates that are in non-init status. The xstates that are in
init status will not be copied to user if using xstate_bv. In this case, the
xstates
that are in init status will be all zeros in the user buffer (remember we clear
the user buffer before). That's incorrect.
If pcntxt_mask is used to copy xstates, all of supported xstates either in init
or
non-init status will be copied correctly to the user buffer. All of other parts
in
the user buffer will be zeros.
So there should be a problem to use pcntxt_mask here.
But I agree the init_xstate_buf was not initialized correctly earlier in the
boot
time. But that's a separate issue to be fixed in a different patch.
Thanks.
-Fenghua
N�����r��y����b�X��ǧv�^�){.n�+����{����zX����ܨ}���Ơz�&j:+v�������zZ+��+zf���h���~����i���z� �w���?�����&�)ߢf��^jǫy�m��@A�a���
0��h���i
