> This patch uses the unique id to identify the type of external connector
> instead
> of string name. The string name have the many potential issues. So, this patch
> defines the 'extcon' enumeration which includes all supported external
> connector
> on EXTCON subsystem. If new external connector is necessary, the unique id of
> new connector have to be added in 'extcon' enumeration. There are current
> supported external connector in 'enum extcon' as following:
>
> enum extcon {
> EXTCON_NONE = 0x0, /* NONE */
>
> /* USB external connector */
> EXTCON_USB = 0x1, /* USB */
> EXTCON_USB_HOST = 0x2, /* USB-HOST */
>
> /* Charger external connector */
> EXTCON_TA = 0x10, /* TA */
> EXTCON_FAST_CHARGER = 0x11, /* FAST-CHARGER */
> EXTCON_SLOW_CHARGER = 0x12, /* SLOW-CHARGER */
> EXTCON_CHARGE_DOWNSTREAM= 0x13, /* CHARGE-
> DOWNSTREAM */
>
> /* Audio and video external connector */
> EXTCON_LINE_IN = 0x20, /* LINE-IN */
> EXTCON_LINE_OUT = 0x21, /* LINE-OUT */
> EXTCON_MICROPHONE = 0x22, /* MICROPHONE */
> EXTCON_HEADPHONE = 0x23, /* HEADPHONE */
>
> EXTCON_HDMI = 0x30, /* HDMI */
> EXTCON_MHL = 0x31, /* MHL */
> EXTCON_DVI = 0x32, /* DVI */
> EXTCON_VGA = 0x33, /* VGA */
> EXTCON_SPDIF_IN = 0x34, /* SPDIF-IN */
> EXTCON_SPDIF_OUT = 0x35, /* SPDIF-OUT */
> EXTCON_VIDEO_IN = 0x36, /* VIDEO-IN */
> EXTCON_VIDEO_OUT = 0x37, /* VIDEO-OUT */
>
> /* Miscellaneous external connector */
> EXTCON_DOCK = 0x50, /* DOCK */
> EXTCON_JIG = 0x51, /* JIG */
> EXTCON_MECHANICAL = 0x52, /* MECHANICAL */
>
> __EXTCON_END,
> };
>
> For exmaple in extcon-arizoan.c:
> To use unique id removes the potential issue about handling
> the inconsistent name of external connector with string.
> - Previously, use the string to register the type of arizona jack connector
> static const char *arizona_cable[] = {
> "Mechanical",
> "Microphone",
> "Headphone",
> "Line-out",
> };
> - Newly, use the unique id to register the type of arizona jack connector
> static const enum extcon arizona_cable[] = {
> EXTCON_MECHANICAL,
> EXTCON_MICROPHONE,
> EXTCON_HEADPHONE,
> EXTCON_LINE_OUT,
>
> EXTCON_NONE,
> };
>
> And this patch modify the prototype of extcon_{get|set}_cable_state_() which
> uses the 'enum extcon id' instead of 'cable_index'. Because although one more
> extcon drivers support USB cable, each extcon driver might has the differnt
> 'cable_index' for USB cable. All extcon drivers can use the unique id number
> for same external connector with modified extcon_{get|set}_cable_state_().
>
> - Previously, use 'cable_index' on these functions:
> extcon_get_cable_state_(struct extcon_dev*, int cable_index)
> extcon_set_cable_state_(struct extcon_dev*, int cable_index, bool state)
>
> -Newly, use 'enum extcon id' on these functions:
> extcon_get_cable_state_(struct extcon_dev*, enum extcon id)
> extcon_set_cable_state_(struct extcon_dev*, enum extcon id, bool state)
>
> Signed-off-by: Chanwoo Choi <cw00.c...@samsung.com>
> Cc: MyungJoo Ham <myungjoo....@samsung.com>
> Cc: Krzysztof Kozlowski <k.kozlow...@samsung.com>
> Cc: Charles Keepax <ckee...@opensource.wolfsonmicro.com>
> Cc: Graeme Gregory <g...@slimlogic.co.uk>
> Cc: Kishon Vijay Abraham I <kis...@ti.com>
> Cc: Jaewon Kim <jaewon02....@samsung.com>
> Cc: Roger Quadros <rog...@ti.com>
> Cc: Ramakrishna Pallala <ramakrishna.pall...@intel.com>
For drivers/extcon/extcon-axp288.c
Acked-by: Ramakrishna Pallala <ramakrishna.pall...@intel.com>
Thanks,
Ram
> ---
> drivers/extcon/extcon-arizona.c | 38 +++-----
> drivers/extcon/extcon-axp288.c | 24 ++---
> drivers/extcon/extcon-max14577.c | 45 ++++-----
> drivers/extcon/extcon-max77693.c | 95 +++++++++----------
> drivers/extcon/extcon-max77843.c | 56 +++++------
> drivers/extcon/extcon-max8997.c | 59 +++++-------
> drivers/extcon/extcon-palmas.c | 22 +++--
> drivers/extcon/extcon-rt8973a.c | 40 +++-----
> drivers/extcon/extcon-sm5502.c | 32 ++-----
> drivers/extcon/extcon-usb-gpio.c | 32 ++-----
> drivers/extcon/extcon.c | 166
> ++++++++++++++++++++-------------
> include/linux/extcon.h | 92 +++++++++---------
> include/linux/extcon/extcon-adc-jack.h | 5 +-
> 13 files changed, 326 insertions(+), 380 deletions(-)
>
> diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
> index 1ec06b4..9262b45 100644
> --- a/drivers/extcon/extcon-arizona.c
> +++ b/drivers/extcon/extcon-arizona.c
> @@ -118,17 +118,12 @@ static const int arizona_micd_levels[] = {
> 1257,
> };
>
> -#define ARIZONA_CABLE_MECHANICAL 0
> -#define ARIZONA_CABLE_MICROPHONE 1
> -#define ARIZONA_CABLE_HEADPHONE 2
> -#define ARIZONA_CABLE_LINEOUT 3
> -
> -static const char *arizona_cable[] = {
> - "Mechanical",
> - "Microphone",
> - "Headphone",
> - "Line-out",
> - NULL,
> +static const enum extcon arizona_cable[] = {
> + EXTCON_MECHANICAL,
> + EXTCON_MICROPHONE,
> + EXTCON_HEADPHONE,
> + EXTCON_LINE_OUT,
> + EXTCON_NONE,
> };
>
> static void arizona_start_hpdet_acc_id(struct arizona_extcon_info *info);
> @@ -557,7 +552,7 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data)
> struct arizona_extcon_info *info = data;
> struct arizona *arizona = info->arizona;
> int id_gpio = arizona->pdata.hpdet_id_gpio;
> - int report = ARIZONA_CABLE_HEADPHONE;
> + enum extcon report = EXTCON_HEADPHONE;
> int ret, reading;
> bool mic = false;
>
> @@ -571,7 +566,7 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data)
> }
>
> /* If the cable was removed while measuring ignore the result */
> - ret = extcon_get_cable_state_(info->edev,
> ARIZONA_CABLE_MECHANICAL);
> + ret = extcon_get_cable_state_(info->edev, EXTCON_MECHANICAL);
> if (ret < 0) {
> dev_err(arizona->dev, "Failed to check cable state: %d\n",
> ret);
> @@ -602,9 +597,9 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data)
>
> /* Report high impedence cables as line outputs */
> if (reading >= 5000)
> - report = ARIZONA_CABLE_LINEOUT;
> + report = EXTCON_LINE_OUT;
> else
> - report = ARIZONA_CABLE_HEADPHONE;
> + report = EXTCON_HEADPHONE;
>
> ret = extcon_set_cable_state_(info->edev, report, true);
> if (ret != 0)
> @@ -689,8 +684,7 @@ err:
> ARIZONA_ACCDET_MODE_MASK,
> ARIZONA_ACCDET_MODE_MIC);
>
> /* Just report headphone */
> - ret = extcon_set_cable_state_(info->edev,
> - ARIZONA_CABLE_HEADPHONE, true);
> + ret = extcon_set_cable_state_(info->edev, EXTCON_HEADPHONE, true);
> if (ret != 0)
> dev_err(arizona->dev, "Failed to report headphone: %d\n", ret);
>
> @@ -747,8 +741,7 @@ err:
> ARIZONA_ACCDET_MODE_MASK,
> ARIZONA_ACCDET_MODE_MIC);
>
> /* Just report headphone */
> - ret = extcon_set_cable_state_(info->edev,
> - ARIZONA_CABLE_HEADPHONE, true);
> + ret = extcon_set_cable_state_(info->edev, EXTCON_HEADPHONE, true);
> if (ret != 0)
> dev_err(arizona->dev, "Failed to report headphone: %d\n", ret);
>
> @@ -787,7 +780,7 @@ static void arizona_micd_detect(struct work_struct
> *work)
> mutex_lock(&info->lock);
>
> /* If the cable was removed while measuring ignore the result */
> - ret = extcon_get_cable_state_(info->edev,
> ARIZONA_CABLE_MECHANICAL);
> + ret = extcon_get_cable_state_(info->edev, EXTCON_MECHANICAL);
> if (ret < 0) {
> dev_err(arizona->dev, "Failed to check cable state: %d\n",
> ret);
> @@ -836,8 +829,7 @@ static void arizona_micd_detect(struct work_struct
> *work)
> arizona_identify_headphone(info);
>
> ret = extcon_set_cable_state_(info->edev,
> - ARIZONA_CABLE_MICROPHONE,
> true);
> -
> + EXTCON_MICROPHONE, true);
> if (ret != 0)
> dev_err(arizona->dev, "Headset report failed: %d\n",
> ret);
> @@ -1028,7 +1020,7 @@ static irqreturn_t arizona_jackdet(int irq, void *data)
> if (info->last_jackdet == present) {
> dev_dbg(arizona->dev, "Detected jack\n");
> ret = extcon_set_cable_state_(info->edev,
> - ARIZONA_CABLE_MECHANICAL,
> true);
> + EXTCON_MECHANICAL, true);
>
> if (ret != 0)
> dev_err(arizona->dev, "Mechanical report failed:
> %d\n",
> diff --git a/drivers/extcon/extcon-axp288.c b/drivers/extcon/extcon-axp288.c
> index 8299adb..3605aa96 100644
> --- a/drivers/extcon/extcon-axp288.c
> +++ b/drivers/extcon/extcon-axp288.c
> @@ -77,10 +77,6 @@
> /* IRQ enable-6 register */
> #define BC12_IRQ_CFG_MASK BIT(1)
>
> -#define AXP288_EXTCON_SLOW_CHARGER "SLOW-CHARGER"
> -#define AXP288_EXTCON_DOWNSTREAM_CHARGER "CHARGE-
> DOWNSTREAM"
> -#define AXP288_EXTCON_FAST_CHARGER "FAST-CHARGER"
> -
> enum axp288_extcon_reg {
> AXP288_PS_STAT_REG = 0x00,
> AXP288_PS_BOOT_REASON_REG = 0x02,
> @@ -105,11 +101,11 @@ enum axp288_extcon_irq {
> EXTCON_IRQ_END,
> };
>
> -static const char *axp288_extcon_cables[] = {
> - AXP288_EXTCON_SLOW_CHARGER,
> - AXP288_EXTCON_DOWNSTREAM_CHARGER,
> - AXP288_EXTCON_FAST_CHARGER,
> - NULL,
> +static const enum extcon axp288_extcon_cables[] = {
> + EXTCON_SLOW_CHARGER,
> + EXTCON_CHARGE_DOWNSTREAM,
> + EXTCON_FAST_CHARGER,
> + EXTCON_NONE,
> };
>
> struct axp288_extcon_info {
> @@ -161,7 +157,7 @@ static void axp288_extcon_log_rsi(struct
> axp288_extcon_info *info)
> static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info)
> {
> static bool notify_otg, notify_charger;
> - static char *cable;
> + static enum extcon cable;
> int ret, stat, cfg, pwr_stat;
> u8 chrg_type;
> bool vbus_attach = false;
> @@ -196,18 +192,18 @@ static int axp288_handle_chrg_det_event(struct
> axp288_extcon_info *info)
> dev_dbg(info->dev, "sdp cable is connecetd\n");
> notify_otg = true;
> notify_charger = true;
> - cable = AXP288_EXTCON_SLOW_CHARGER;
> + cable = EXTCON_SLOW_CHARGER;
> break;
> case DET_STAT_CDP:
> dev_dbg(info->dev, "cdp cable is connecetd\n");
> notify_otg = true;
> notify_charger = true;
> - cable = AXP288_EXTCON_DOWNSTREAM_CHARGER;
> + cable = EXTCON_CHARGE_DOWNSTREAM;
> break;
> case DET_STAT_DCP:
> dev_dbg(info->dev, "dcp cable is connecetd\n");
> notify_charger = true;
> - cable = AXP288_EXTCON_FAST_CHARGER;
> + cable = EXTCON_FAST_CHARGER;
> break;
> default:
> dev_warn(info->dev,
> @@ -230,7 +226,7 @@ notify_otg:
> }
>
> if (notify_charger)
> - extcon_set_cable_state(info->edev, cable, vbus_attach);
> + extcon_set_cable_state_(info->edev, cable, vbus_attach);
>
> /* Clear the flags on disconnect event */
> if (!vbus_attach)
> diff --git a/drivers/extcon/extcon-max14577.c b/drivers/extcon/extcon-
> max14577.c
> index ad8f8dd..e7c3edb 100644
> --- a/drivers/extcon/extcon-max14577.c
> +++ b/drivers/extcon/extcon-max14577.c
> @@ -148,27 +148,14 @@ enum max14577_muic_acc_type {
> MAX14577_MUIC_ADC_OPEN,
> };
>
> -/* max14577 MUIC device support below list of accessories(external
> connector) */
> -enum {
> - EXTCON_CABLE_USB = 0,
> - EXTCON_CABLE_TA,
> - EXTCON_CABLE_FAST_CHARGER,
> - EXTCON_CABLE_SLOW_CHARGER,
> - EXTCON_CABLE_CHARGE_DOWNSTREAM,
> - EXTCON_CABLE_JIG,
> -
> - _EXTCON_CABLE_NUM,
> -};
> -
> -static const char *max14577_extcon_cable[] = {
> - [EXTCON_CABLE_USB] = "USB",
> - [EXTCON_CABLE_TA] = "TA",
> - [EXTCON_CABLE_FAST_CHARGER] = "Fast-charger",
> - [EXTCON_CABLE_SLOW_CHARGER] = "Slow-charger",
> - [EXTCON_CABLE_CHARGE_DOWNSTREAM] = "Charge-
> downstream",
> - [EXTCON_CABLE_JIG] = "JIG",
> -
> - NULL,
> +static const enum extcon max14577_extcon_cable[] = {
> + EXTCON_USB,
> + EXTCON_TA,
> + EXTCON_FAST_CHARGER,
> + EXTCON_SLOW_CHARGER,
> + EXTCON_CHARGE_DOWNSTREAM,
> + EXTCON_JIG,
> + EXTCON_NONE,
> };
>
> /*
> @@ -369,7 +356,7 @@ static int max14577_muic_jig_handler(struct
> max14577_muic_info *info,
> if (ret < 0)
> return ret;
>
> - extcon_set_cable_state(info->edev, "JIG", attached);
> + extcon_set_cable_state_(info->edev, EXTCON_JIG, attached);
>
> return 0;
> }
> @@ -466,20 +453,22 @@ static int max14577_muic_chg_handler(struct
> max14577_muic_info *info)
> if (ret < 0)
> return ret;
>
> - extcon_set_cable_state(info->edev, "USB", attached);
> + extcon_set_cable_state_(info->edev, EXTCON_USB, attached);
> break;
> case MAX14577_CHARGER_TYPE_DEDICATED_CHG:
> - extcon_set_cable_state(info->edev, "TA", attached);
> + extcon_set_cable_state_(info->edev, EXTCON_TA, attached);
> break;
> case MAX14577_CHARGER_TYPE_DOWNSTREAM_PORT:
> - extcon_set_cable_state(info->edev,
> - "Charge-downstream", attached);
> + extcon_set_cable_state_(info->edev,
> EXTCON_CHARGE_DOWNSTREAM,
> + attached);
> break;
> case MAX14577_CHARGER_TYPE_SPECIAL_500MA:
> - extcon_set_cable_state(info->edev, "Slow-charger", attached);
> + extcon_set_cable_state_(info->edev,
> EXTCON_SLOW_CHARGER,
> + attached);
> break;
> case MAX14577_CHARGER_TYPE_SPECIAL_1A:
> - extcon_set_cable_state(info->edev, "Fast-charger", attached);
> + extcon_set_cable_state_(info->edev, EXTCON_FAST_CHARGER,
> + attached);
> break;
> case MAX14577_CHARGER_TYPE_NONE:
> case MAX14577_CHARGER_TYPE_DEAD_BATTERY:
> diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-
> max77693.c
> index c274249..20e796e 100644
> --- a/drivers/extcon/extcon-max77693.c
> +++ b/drivers/extcon/extcon-max77693.c
> @@ -200,32 +200,17 @@ enum max77693_muic_acc_type {
> /*
> * MAX77693 MUIC device support below list of accessories(external connector)
> */
> -enum {
> - EXTCON_CABLE_USB = 0,
> - EXTCON_CABLE_USB_HOST,
> - EXTCON_CABLE_TA,
> - EXTCON_CABLE_FAST_CHARGER,
> - EXTCON_CABLE_SLOW_CHARGER,
> - EXTCON_CABLE_CHARGE_DOWNSTREAM,
> - EXTCON_CABLE_MHL,
> - EXTCON_CABLE_JIG,
> - EXTCON_CABLE_DOCK,
> -
> - _EXTCON_CABLE_NUM,
> -};
> -
> -static const char *max77693_extcon_cable[] = {
> - [EXTCON_CABLE_USB] = "USB",
> - [EXTCON_CABLE_USB_HOST] = "USB-Host",
> - [EXTCON_CABLE_TA] = "TA",
> - [EXTCON_CABLE_FAST_CHARGER] = "Fast-charger",
> - [EXTCON_CABLE_SLOW_CHARGER] = "Slow-charger",
> - [EXTCON_CABLE_CHARGE_DOWNSTREAM] = "Charge-
> downstream",
> - [EXTCON_CABLE_MHL] = "MHL",
> - [EXTCON_CABLE_JIG] = "JIG",
> - [EXTCON_CABLE_DOCK] = "DOCK",
> -
> - NULL,
> +static const enum extcon max77693_extcon_cable[] = {
> + EXTCON_USB,
> + EXTCON_USB_HOST,
> + EXTCON_TA,
> + EXTCON_FAST_CHARGER,
> + EXTCON_SLOW_CHARGER,
> + EXTCON_CHARGE_DOWNSTREAM,
> + EXTCON_MHL,
> + EXTCON_JIG,
> + EXTCON_DOCK,
> + EXTCON_NONE,
> };
>
> /*
> @@ -472,7 +457,7 @@ static int max77693_muic_dock_handler(struct
> max77693_muic_info *info,
> int ret = 0;
> int vbvolt;
> bool cable_attached;
> - char dock_name[CABLE_NAME_MAX];
> + enum extcon dock_id;
>
> dev_info(info->dev,
> "external connector is %s (adc:0x%02x)\n",
> @@ -517,16 +502,16 @@ static int max77693_muic_dock_handler(struct
> max77693_muic_info *info,
> if (ret < 0)
> return ret;
>
> - extcon_set_cable_state(info->edev, "DOCK", attached);
> - extcon_set_cable_state(info->edev, "MHL", attached);
> + extcon_set_cable_state_(info->edev, EXTCON_DOCK,
> attached);
> + extcon_set_cable_state_(info->edev, EXTCON_MHL, attached);
> goto out;
> case MAX77693_MUIC_ADC_AUDIO_MODE_REMOTE: /* Dock-Desk
> */
> - strcpy(dock_name, "DOCK");
> + dock_id = EXTCON_DOCK;
> break;
> case MAX77693_MUIC_ADC_AV_CABLE_NOLOAD: /*
> Dock-Audio */
> - strcpy(dock_name, "DOCK");
> + dock_id = EXTCON_DOCK;
> if (!attached)
> - extcon_set_cable_state(info->edev, "USB", false);
> + extcon_set_cable_state_(info->edev, EXTCON_USB,
> false);
> break;
> default:
> dev_err(info->dev, "failed to detect %s dock device\n",
> @@ -538,7 +523,7 @@ static int max77693_muic_dock_handler(struct
> max77693_muic_info *info,
> ret = max77693_muic_set_path(info, CONTROL1_SW_AUDIO,
> attached);
> if (ret < 0)
> return ret;
> - extcon_set_cable_state(info->edev, dock_name, attached);
> + extcon_set_cable_state_(info->edev, dock_id, attached);
>
> out:
> return 0;
> @@ -603,20 +588,19 @@ static int
> max77693_muic_adc_ground_handler(struct max77693_muic_info *info)
> ret = max77693_muic_set_path(info, CONTROL1_SW_USB,
> attached);
> if (ret < 0)
> return ret;
> - extcon_set_cable_state(info->edev, "USB-Host", attached);
> + extcon_set_cable_state_(info->edev, EXTCON_USB_HOST,
> attached);
> break;
> case MAX77693_MUIC_GND_AV_CABLE_LOAD:
> /* Audio Video Cable with load, PATH:AUDIO */
> ret = max77693_muic_set_path(info, CONTROL1_SW_AUDIO,
> attached);
> if (ret < 0)
> return ret;
> - extcon_set_cable_state(info->edev,
> - "Audio-video-load", attached);
> + extcon_set_cable_state_(info->edev, EXTCON_USB, attached);
> break;
> case MAX77693_MUIC_GND_MHL:
> case MAX77693_MUIC_GND_MHL_VB:
> /* MHL or MHL with USB/TA cable */
> - extcon_set_cable_state(info->edev, "MHL", attached);
> + extcon_set_cable_state_(info->edev, EXTCON_MHL, attached);
> break;
> default:
> dev_err(info->dev, "failed to detect %s cable of gnd type\n",
> @@ -658,7 +642,7 @@ static int max77693_muic_jig_handler(struct
> max77693_muic_info *info,
> if (ret < 0)
> return ret;
>
> - extcon_set_cable_state(info->edev, "JIG", attached);
> + extcon_set_cable_state_(info->edev, EXTCON_JIG, attached);
>
> return 0;
> }
> @@ -812,10 +796,10 @@ static int max77693_muic_chg_handler(struct
> max77693_muic_info *info)
> * - Support charging through micro-usb port without
> * data connection
> */
> - extcon_set_cable_state(info->edev, "TA", attached);
> + extcon_set_cable_state_(info->edev, EXTCON_TA,
> attached);
> if (!cable_attached)
> - extcon_set_cable_state(info->edev,
> - "MHL", cable_attached);
> + extcon_set_cable_state_(info->edev,
> EXTCON_MHL,
> + cable_attached);
> break;
> }
>
> @@ -838,11 +822,12 @@ static int max77693_muic_chg_handler(struct
> max77693_muic_info *info)
> * - Support charging through micro-usb port without
> * data connection.
> */
> - extcon_set_cable_state(info->edev, "USB", attached);
> + extcon_set_cable_state_(info->edev, EXTCON_USB,
> + attached);
>
> if (!cable_attached)
> - extcon_set_cable_state(info->edev, "DOCK",
> - cable_attached);
> + extcon_set_cable_state_(info->edev,
> EXTCON_DOCK,
> + cable_attached);
> break;
> case MAX77693_MUIC_ADC_RESERVED_ACC_3: /*
> Dock-Smart */
> /*
> @@ -870,9 +855,10 @@ static int max77693_muic_chg_handler(struct
> max77693_muic_info *info)
> if (ret < 0)
> return ret;
>
> - extcon_set_cable_state(info->edev, "DOCK", attached);
> - extcon_set_cable_state(info->edev, "MHL", attached);
> -
> + extcon_set_cable_state_(info->edev, EXTCON_DOCK,
> + attached);
> + extcon_set_cable_state_(info->edev, EXTCON_MHL,
> + attached);
> break;
> }
>
> @@ -905,23 +891,26 @@ static int max77693_muic_chg_handler(struct
> max77693_muic_info *info)
> if (ret < 0)
> return ret;
>
> - extcon_set_cable_state(info->edev, "USB", attached);
> + extcon_set_cable_state_(info->edev, EXTCON_USB,
> + attached);
> break;
> case MAX77693_CHARGER_TYPE_DEDICATED_CHG:
> /* Only TA cable */
> - extcon_set_cable_state(info->edev, "TA", attached);
> + extcon_set_cable_state_(info->edev, EXTCON_TA,
> attached);
> break;
> }
> break;
> case MAX77693_CHARGER_TYPE_DOWNSTREAM_PORT:
> - extcon_set_cable_state(info->edev,
> - "Charge-downstream", attached);
> + extcon_set_cable_state_(info->edev,
> EXTCON_CHARGE_DOWNSTREAM,
> + attached);
> break;
> case MAX77693_CHARGER_TYPE_APPLE_500MA:
> - extcon_set_cable_state(info->edev, "Slow-charger", attached);
> + extcon_set_cable_state_(info->edev,
> EXTCON_SLOW_CHARGER,
> + attached);
> break;
> case MAX77693_CHARGER_TYPE_APPLE_1A_2A:
> - extcon_set_cable_state(info->edev, "Fast-charger", attached);
> + extcon_set_cable_state_(info->edev, EXTCON_FAST_CHARGER,
> + attached);
> break;
> case MAX77693_CHARGER_TYPE_DEAD_BATTERY:
> break;
> diff --git a/drivers/extcon/extcon-max77843.c b/drivers/extcon/extcon-
> max77843.c
> index 5746d7b..d78a64d 100644
> --- a/drivers/extcon/extcon-max77843.c
> +++ b/drivers/extcon/extcon-max77843.c
> @@ -118,28 +118,16 @@ enum max77843_muic_charger_type {
> MAX77843_MUIC_CHG_GND,
> };
>
> -enum {
> - MAX77843_CABLE_USB = 0,
> - MAX77843_CABLE_USB_HOST,
> - MAX77843_CABLE_TA,
> - MAX77843_CABLE_CHARGE_DOWNSTREAM,
> - MAX77843_CABLE_FAST_CHARGER,
> - MAX77843_CABLE_SLOW_CHARGER,
> - MAX77843_CABLE_MHL,
> - MAX77843_CABLE_JIG,
> -
> - MAX77843_CABLE_NUM,
> -};
> -
> -static const char *max77843_extcon_cable[] = {
> - [MAX77843_CABLE_USB] = "USB",
> - [MAX77843_CABLE_USB_HOST] = "USB-HOST",
> - [MAX77843_CABLE_TA] = "TA",
> - [MAX77843_CABLE_CHARGE_DOWNSTREAM] = "CHARGER-
> DOWNSTREAM",
> - [MAX77843_CABLE_FAST_CHARGER] = "FAST-CHARGER",
> - [MAX77843_CABLE_SLOW_CHARGER] = "SLOW-CHARGER",
> - [MAX77843_CABLE_MHL] = "MHL",
> - [MAX77843_CABLE_JIG] = "JIG",
> +static const enum extcon max77843_extcon_cable[] = {
> + EXTCON_USB,
> + EXTCON_USB_HOST,
> + EXTCON_TA,
> + EXTCON_CHARGE_DOWNSTREAM,
> + EXTCON_FAST_CHARGER,
> + EXTCON_SLOW_CHARGER,
> + EXTCON_MHL,
> + EXTCON_JIG,
> + EXTCON_NONE,
> };
>
> struct max77843_muic_irq {
> @@ -354,7 +342,7 @@ static int max77843_muic_adc_gnd_handler(struct
> max77843_muic_info *info)
> if (ret < 0)
> return ret;
>
> - extcon_set_cable_state(info->edev, "USB-HOST", attached);
> + extcon_set_cable_state_(info->edev, EXTCON_USB_HOST,
> attached);
> break;
> case MAX77843_MUIC_GND_MHL_VB:
> case MAX77843_MUIC_GND_MHL:
> @@ -362,7 +350,7 @@ static int max77843_muic_adc_gnd_handler(struct
> max77843_muic_info *info)
> if (ret < 0)
> return ret;
>
> - extcon_set_cable_state(info->edev, "MHL", attached);
> + extcon_set_cable_state_(info->edev, EXTCON_MHL, attached);
> break;
> default:
> dev_err(info->dev, "failed to detect %s accessory(gnd:0x%x)\n",
> @@ -398,7 +386,7 @@ static int max77843_muic_jig_handler(struct
> max77843_muic_info *info,
> if (ret < 0)
> return ret;
>
> - extcon_set_cable_state(info->edev, "JIG", attached);
> + extcon_set_cable_state_(info->edev, EXTCON_JIG, attached);
>
> return 0;
> }
> @@ -490,36 +478,38 @@ static int max77843_muic_chg_handler(struct
> max77843_muic_info *info)
> if (ret < 0)
> return ret;
>
> - extcon_set_cable_state(info->edev, "USB", attached);
> + extcon_set_cable_state_(info->edev, EXTCON_USB, attached);
> break;
> case MAX77843_MUIC_CHG_DOWNSTREAM:
> ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN,
> attached);
> if (ret < 0)
> return ret;
>
> - extcon_set_cable_state(info->edev,
> - "CHARGER-DOWNSTREAM", attached);
> + extcon_set_cable_state_(info->edev,
> EXTCON_CHARGE_DOWNSTREAM,
> + attached);
> break;
> case MAX77843_MUIC_CHG_DEDICATED:
> ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN,
> attached);
> if (ret < 0)
> return ret;
>
> - extcon_set_cable_state(info->edev, "TA", attached);
> + extcon_set_cable_state_(info->edev, EXTCON_TA, attached);
> break;
> case MAX77843_MUIC_CHG_SPECIAL_500MA:
> ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN,
> attached);
> if (ret < 0)
> return ret;
>
> - extcon_set_cable_state(info->edev, "SLOW-CHAREGER",
> attached);
> + extcon_set_cable_state_(info->edev,
> EXTCON_SLOW_CHARGER,
> + attached);
> break;
> case MAX77843_MUIC_CHG_SPECIAL_1A:
> ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN,
> attached);
> if (ret < 0)
> return ret;
>
> - extcon_set_cable_state(info->edev, "FAST-CHARGER",
> attached);
> + extcon_set_cable_state_(info->edev, EXTCON_FAST_CHARGER,
> + attached);
> break;
> case MAX77843_MUIC_CHG_GND:
> gnd_type = max77843_muic_get_cable_type(info,
> @@ -527,9 +517,9 @@ static int max77843_muic_chg_handler(struct
> max77843_muic_info *info)
>
> /* Charger cable on MHL accessory is attach or detach */
> if (gnd_type == MAX77843_MUIC_GND_MHL_VB)
> - extcon_set_cable_state(info->edev, "TA", true);
> + extcon_set_cable_state_(info->edev, EXTCON_TA,
> true);
> else if (gnd_type == MAX77843_MUIC_GND_MHL)
> - extcon_set_cable_state(info->edev, "TA", false);
> + extcon_set_cable_state_(info->edev, EXTCON_TA,
> false);
> break;
> case MAX77843_MUIC_CHG_NONE:
> break;
> diff --git a/drivers/extcon/extcon-max8997.c b/drivers/extcon/extcon-
> max8997.c
> index 33613c4..4d10949 100644
> --- a/drivers/extcon/extcon-max8997.c
> +++ b/drivers/extcon/extcon-max8997.c
> @@ -145,32 +145,17 @@ struct max8997_muic_info {
> int path_uart;
> };
>
> -enum {
> - EXTCON_CABLE_USB = 0,
> - EXTCON_CABLE_USB_HOST,
> - EXTCON_CABLE_TA,
> - EXTCON_CABLE_FAST_CHARGER,
> - EXTCON_CABLE_SLOW_CHARGER,
> - EXTCON_CABLE_CHARGE_DOWNSTREAM,
> - EXTCON_CABLE_MHL,
> - EXTCON_CABLE_DOCK,
> - EXTCON_CABLE_JIG,
> -
> - _EXTCON_CABLE_NUM,
> -};
> -
> -static const char *max8997_extcon_cable[] = {
> - [EXTCON_CABLE_USB] = "USB",
> - [EXTCON_CABLE_USB_HOST] = "USB-Host",
> - [EXTCON_CABLE_TA] = "TA",
> - [EXTCON_CABLE_FAST_CHARGER] = "Fast-charger",
> - [EXTCON_CABLE_SLOW_CHARGER] = "Slow-charger",
> - [EXTCON_CABLE_CHARGE_DOWNSTREAM] = "Charge-
> downstream",
> - [EXTCON_CABLE_MHL] = "MHL",
> - [EXTCON_CABLE_DOCK] = "DOCK",
> - [EXTCON_CABLE_JIG] = "JIG",
> -
> - NULL,
> +static const enum extcon max8997_extcon_cable[] = {
> + EXTCON_USB,
> + EXTCON_USB_HOST,
> + EXTCON_TA,
> + EXTCON_FAST_CHARGER,
> + EXTCON_SLOW_CHARGER,
> + EXTCON_CHARGE_DOWNSTREAM,
> + EXTCON_MHL,
> + EXTCON_DOCK,
> + EXTCON_JIG,
> + EXTCON_NONE,
> };
>
> /*
> @@ -345,10 +330,10 @@ static int max8997_muic_handle_usb(struct
> max8997_muic_info *info,
>
> switch (usb_type) {
> case MAX8997_USB_HOST:
> - extcon_set_cable_state(info->edev, "USB-Host", attached);
> + extcon_set_cable_state_(info->edev, EXTCON_USB_HOST,
> attached);
> break;
> case MAX8997_USB_DEVICE:
> - extcon_set_cable_state(info->edev, "USB", attached);
> + extcon_set_cable_state_(info->edev, EXTCON_USB, attached);
> break;
> default:
> dev_err(info->dev, "failed to detect %s usb cable\n",
> @@ -373,7 +358,7 @@ static int max8997_muic_handle_dock(struct
> max8997_muic_info *info,
> switch (cable_type) {
> case MAX8997_MUIC_ADC_AV_CABLE_NOLOAD:
> case MAX8997_MUIC_ADC_FACTORY_MODE_UART_ON:
> - extcon_set_cable_state(info->edev, "DOCK", attached);
> + extcon_set_cable_state_(info->edev, EXTCON_DOCK,
> attached);
> break;
> default:
> dev_err(info->dev, "failed to detect %s dock device\n",
> @@ -396,7 +381,7 @@ static int max8997_muic_handle_jig_uart(struct
> max8997_muic_info *info,
> return ret;
> }
>
> - extcon_set_cable_state(info->edev, "JIG", attached);
> + extcon_set_cable_state_(info->edev, EXTCON_JIG, attached);
>
> return 0;
> }
> @@ -418,7 +403,7 @@ static int max8997_muic_adc_handler(struct
> max8997_muic_info *info)
> return ret;
> break;
> case MAX8997_MUIC_ADC_MHL:
> - extcon_set_cable_state(info->edev, "MHL", attached);
> + extcon_set_cable_state_(info->edev, EXTCON_MHL, attached);
> break;
> case MAX8997_MUIC_ADC_FACTORY_MODE_USB_OFF:
> case MAX8997_MUIC_ADC_FACTORY_MODE_USB_ON:
> @@ -501,17 +486,19 @@ static int max8997_muic_chg_handler(struct
> max8997_muic_info *info)
> }
> break;
> case MAX8997_CHARGER_TYPE_DOWNSTREAM_PORT:
> - extcon_set_cable_state(info->edev,
> - "Charge-downstream", attached);
> + extcon_set_cable_state_(info->edev,
> EXTCON_CHARGE_DOWNSTREAM,
> + attached);
> break;
> case MAX8997_CHARGER_TYPE_DEDICATED_CHG:
> - extcon_set_cable_state(info->edev, "TA", attached);
> + extcon_set_cable_state_(info->edev, EXTCON_TA, attached);
> break;
> case MAX8997_CHARGER_TYPE_500MA:
> - extcon_set_cable_state(info->edev, "Slow-charger", attached);
> + extcon_set_cable_state_(info->edev,
> EXTCON_SLOW_CHARGER,
> + attached);
> break;
> case MAX8997_CHARGER_TYPE_1A:
> - extcon_set_cable_state(info->edev, "Fast-charger", attached);
> + extcon_set_cable_state_(info->edev, EXTCON_FAST_CHARGER,
> + attached);
> break;
> default:
> dev_err(info->dev,
> diff --git a/drivers/extcon/extcon-palmas.c b/drivers/extcon/extcon-palmas.c
> index 9c8943d..d689540 100644
> --- a/drivers/extcon/extcon-palmas.c
> +++ b/drivers/extcon/extcon-palmas.c
> @@ -29,10 +29,10 @@
> #include <linux/of.h>
> #include <linux/of_platform.h>
>
> -static const char *palmas_extcon_cable[] = {
> - [0] = "USB",
> - [1] = "USB-HOST",
> - NULL,
> +static const enum extcon palmas_extcon_cable[] = {
> + EXTCON_USB,
> + EXTCON_USB_HOST,
> + EXTCON_NONE,
> };
>
> static const int mutually_exclusive[] = {0x3, 0x0};
> @@ -49,6 +49,7 @@ static void palmas_usb_wakeup(struct palmas *palmas, int
> enable)
> static irqreturn_t palmas_vbus_irq_handler(int irq, void *_palmas_usb)
> {
> struct palmas_usb *palmas_usb = _palmas_usb;
> + struct extcon_dev *edev = palmas_usb->edev;
> unsigned int vbus_line_state;
>
> palmas_read(palmas_usb->palmas, PALMAS_INTERRUPT_BASE,
> @@ -57,7 +58,7 @@ static irqreturn_t palmas_vbus_irq_handler(int irq, void
> *_palmas_usb)
> if (vbus_line_state & PALMAS_INT3_LINE_STATE_VBUS) {
> if (palmas_usb->linkstat != PALMAS_USB_STATE_VBUS) {
> palmas_usb->linkstat = PALMAS_USB_STATE_VBUS;
> - extcon_set_cable_state(palmas_usb->edev, "USB",
> true);
> + extcon_set_cable_state_(edev, EXTCON_USB, true);
> dev_info(palmas_usb->dev, "USB cable is attached\n");
> } else {
> dev_dbg(palmas_usb->dev,
> @@ -66,7 +67,7 @@ static irqreturn_t palmas_vbus_irq_handler(int irq, void
> *_palmas_usb)
> } else if (!(vbus_line_state & PALMAS_INT3_LINE_STATE_VBUS)) {
> if (palmas_usb->linkstat == PALMAS_USB_STATE_VBUS) {
> palmas_usb->linkstat =
> PALMAS_USB_STATE_DISCONNECT;
> - extcon_set_cable_state(palmas_usb->edev, "USB",
> false);
> + extcon_set_cable_state_(edev, EXTCON_USB, false);
> dev_info(palmas_usb->dev, "USB cable is detached\n");
> } else {
> dev_dbg(palmas_usb->dev,
> @@ -81,6 +82,7 @@ static irqreturn_t palmas_id_irq_handler(int irq, void
> *_palmas_usb)
> {
> unsigned int set, id_src;
> struct palmas_usb *palmas_usb = _palmas_usb;
> + struct extcon_dev *edev = palmas_usb->edev;
>
> palmas_read(palmas_usb->palmas, PALMAS_USB_OTG_BASE,
> PALMAS_USB_ID_INT_LATCH_SET, &set);
> @@ -93,7 +95,7 @@ static irqreturn_t palmas_id_irq_handler(int irq, void
> *_palmas_usb)
> PALMAS_USB_ID_INT_LATCH_CLR,
> PALMAS_USB_ID_INT_EN_HI_CLR_ID_GND);
> palmas_usb->linkstat = PALMAS_USB_STATE_ID;
> - extcon_set_cable_state(palmas_usb->edev, "USB-HOST", true);
> + extcon_set_cable_state_(edev, EXTCON_USB_HOST, true);
> dev_info(palmas_usb->dev, "USB-HOST cable is attached\n");
> } else if ((set & PALMAS_USB_ID_INT_SRC_ID_FLOAT) &&
> (id_src &
> PALMAS_USB_ID_INT_SRC_ID_FLOAT)) {
> @@ -101,17 +103,17 @@ static irqreturn_t palmas_id_irq_handler(int irq, void
> *_palmas_usb)
> PALMAS_USB_ID_INT_LATCH_CLR,
> PALMAS_USB_ID_INT_EN_HI_CLR_ID_FLOAT);
> palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT;
> - extcon_set_cable_state(palmas_usb->edev, "USB-HOST",
> false);
> + extcon_set_cable_state_(edev, EXTCON_USB_HOST, false);
> dev_info(palmas_usb->dev, "USB-HOST cable is detached\n");
> } else if ((palmas_usb->linkstat == PALMAS_USB_STATE_ID) &&
> (!(set & PALMAS_USB_ID_INT_SRC_ID_GND))) {
> palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT;
> - extcon_set_cable_state(palmas_usb->edev, "USB-HOST",
> false);
> + extcon_set_cable_state_(edev, EXTCON_USB_HOST, false);
> dev_info(palmas_usb->dev, "USB-HOST cable is detached\n");
> } else if ((palmas_usb->linkstat == PALMAS_USB_STATE_DISCONNECT)
> &&
> (id_src & PALMAS_USB_ID_INT_SRC_ID_GND))
> {
> palmas_usb->linkstat = PALMAS_USB_STATE_ID;
> - extcon_set_cable_state(palmas_usb->edev, "USB-HOST", true);
> + extcon_set_cable_state_(edev, EXTCON_USB_HOST, true);
> dev_info(palmas_usb->dev, " USB-HOST cable is attached\n");
> }
>
> diff --git a/drivers/extcon/extcon-rt8973a.c b/drivers/extcon/extcon-rt8973a.c
> index 04447f3..f2a8672 100644
> --- a/drivers/extcon/extcon-rt8973a.c
> +++ b/drivers/extcon/extcon-rt8973a.c
> @@ -90,21 +90,12 @@ static struct reg_data rt8973a_reg_data[] = {
> };
>
> /* List of detectable cables */
> -enum {
> - EXTCON_CABLE_USB = 0,
> - EXTCON_CABLE_USB_HOST,
> - EXTCON_CABLE_TA,
> - EXTCON_CABLE_JIG,
> -
> - EXTCON_CABLE_END,
> -};
> -
> -static const char *rt8973a_extcon_cable[] = {
> - [EXTCON_CABLE_USB] = "USB",
> - [EXTCON_CABLE_USB_HOST] = "USB-Host",
> - [EXTCON_CABLE_TA] = "TA",
> - [EXTCON_CABLE_JIG] = "JIG",
> - NULL,
> +static const enum extcon rt8973a_extcon_cable[] = {
> + EXTCON_USB,
> + EXTCON_USB_HOST,
> + EXTCON_TA,
> + EXTCON_JIG,
> + EXTCON_NONE,
> };
>
> /* Define OVP (Over Voltage Protection), OTP (Over Temperature Protection) */
> @@ -307,14 +298,11 @@ static int rt8973a_muic_cable_handler(struct
> rt8973a_muic_info *info,
> enum rt8973a_event_type event)
> {
> static unsigned int prev_cable_type;
> - const char **cable_names = info->edev->supported_cable;
> unsigned int con_sw = DM_DP_SWITCH_UART;
> - int ret, idx = 0, cable_type;
> + int ret, cable_type;
> + enum extcon id;
> bool attached = false;
>
> - if (!cable_names)
> - return 0;
> -
> switch (event) {
> case RT8973A_EVENT_ATTACH:
> cable_type = rt8973a_muic_get_cable_type(info);
> @@ -341,25 +329,25 @@ static int rt8973a_muic_cable_handler(struct
> rt8973a_muic_info *info,
>
> switch (cable_type) {
> case RT8973A_MUIC_ADC_OTG:
> - idx = EXTCON_CABLE_USB_HOST;
> + id = EXTCON_USB_HOST;
> con_sw = DM_DP_SWITCH_USB;
> break;
> case RT8973A_MUIC_ADC_TA:
> - idx = EXTCON_CABLE_TA;
> + id = EXTCON_TA;
> con_sw = DM_DP_SWITCH_OPEN;
> break;
> case RT8973A_MUIC_ADC_FACTORY_MODE_BOOT_OFF_USB:
> case RT8973A_MUIC_ADC_FACTORY_MODE_BOOT_ON_USB:
> - idx = EXTCON_CABLE_JIG;
> + id = EXTCON_JIG;
> con_sw = DM_DP_SWITCH_USB;
> break;
> case RT8973A_MUIC_ADC_FACTORY_MODE_BOOT_OFF_UART:
> case RT8973A_MUIC_ADC_FACTORY_MODE_BOOT_ON_UART:
> - idx = EXTCON_CABLE_JIG;
> + id = EXTCON_JIG;
> con_sw = DM_DP_SWITCH_UART;
> break;
> case RT8973A_MUIC_ADC_USB:
> - idx = EXTCON_CABLE_USB;
> + id = EXTCON_USB;
> con_sw = DM_DP_SWITCH_USB;
> break;
> case RT8973A_MUIC_ADC_OPEN:
> @@ -409,7 +397,7 @@ static int rt8973a_muic_cable_handler(struct
> rt8973a_muic_info *info,
> return ret;
>
> /* Change the state of external accessory */
> - extcon_set_cable_state(info->edev, cable_names[idx], attached);
> + extcon_set_cable_state_(info->edev, id, attached);
>
> return 0;
> }
> diff --git a/drivers/extcon/extcon-sm5502.c b/drivers/extcon/extcon-sm5502.c
> index 6f1d11f..520693d 100644
> --- a/drivers/extcon/extcon-sm5502.c
> +++ b/drivers/extcon/extcon-sm5502.c
> @@ -92,19 +92,11 @@ static struct reg_data sm5502_reg_data[] = {
> };
>
> /* List of detectable cables */
> -enum {
> - EXTCON_CABLE_USB = 0,
> - EXTCON_CABLE_USB_HOST,
> - EXTCON_CABLE_TA,
> -
> - EXTCON_CABLE_END,
> -};
> -
> -static const char *sm5502_extcon_cable[] = {
> - [EXTCON_CABLE_USB] = "USB",
> - [EXTCON_CABLE_USB_HOST] = "USB-Host",
> - [EXTCON_CABLE_TA] = "TA",
> - NULL,
> +static const enum extcon sm5502_extcon_cable[] = {
> + EXTCON_USB,
> + EXTCON_USB_HOST,
> + EXTCON_TA,
> + EXTCON_NONE,
> };
>
> /* Define supported accessory type */
> @@ -377,16 +369,12 @@ static int sm5502_muic_cable_handler(struct
> sm5502_muic_info *info,
> bool attached)
> {
> static unsigned int prev_cable_type = SM5502_MUIC_ADC_GROUND;
> - const char **cable_names = info->edev->supported_cable;
> unsigned int cable_type = SM5502_MUIC_ADC_GROUND;
> unsigned int con_sw = DM_DP_SWITCH_OPEN;
> unsigned int vbus_sw = VBUSIN_SWITCH_OPEN;
> - unsigned int idx = 0;
> + enum extcon id;
> int ret;
>
> - if (!cable_names)
> - return 0;
> -
> /* Get the type of attached or detached cable */
> if (attached)
> cable_type = sm5502_muic_get_cable_type(info);
> @@ -396,17 +384,17 @@ static int sm5502_muic_cable_handler(struct
> sm5502_muic_info *info,
>
> switch (cable_type) {
> case SM5502_MUIC_ADC_OPEN_USB:
> - idx = EXTCON_CABLE_USB;
> + id = EXTCON_USB;
> con_sw = DM_DP_SWITCH_USB;
> vbus_sw = VBUSIN_SWITCH_VBUSOUT_WITH_USB;
> break;
> case SM5502_MUIC_ADC_OPEN_TA:
> - idx = EXTCON_CABLE_TA;
> + id = EXTCON_TA;
> con_sw = DM_DP_SWITCH_OPEN;
> vbus_sw = VBUSIN_SWITCH_VBUSOUT;
> break;
> case SM5502_MUIC_ADC_OPEN_USB_OTG:
> - idx = EXTCON_CABLE_USB_HOST;
> + id = EXTCON_USB_HOST;
> con_sw = DM_DP_SWITCH_USB;
> vbus_sw = VBUSIN_SWITCH_OPEN;
> break;
> @@ -422,7 +410,7 @@ static int sm5502_muic_cable_handler(struct
> sm5502_muic_info *info,
> return ret;
>
> /* Change the state of external accessory */
> - extcon_set_cable_state(info->edev, cable_names[idx], attached);
> + extcon_set_cable_state_(info->edev, id, attached);
>
> return 0;
> }
> diff --git a/drivers/extcon/extcon-usb-gpio.c b/drivers/extcon/extcon-usb-
> gpio.c
> index 160ec12..4cf4f19 100644
> --- a/drivers/extcon/extcon-usb-gpio.c
> +++ b/drivers/extcon/extcon-usb-gpio.c
> @@ -39,18 +39,10 @@ struct usb_extcon_info {
> struct delayed_work wq_detcable;
> };
>
> -/* List of detectable cables */
> -enum {
> - EXTCON_CABLE_USB = 0,
> - EXTCON_CABLE_USB_HOST,
> -
> - EXTCON_CABLE_END,
> -};
> -
> -static const char *usb_extcon_cable[] = {
> - [EXTCON_CABLE_USB] = "USB",
> - [EXTCON_CABLE_USB_HOST] = "USB-HOST",
> - NULL,
> +static const enum extcon usb_extcon_cable[] = {
> + EXTCON_USB,
> + EXTCON_USB_HOST,
> + EXTCON_NONE,
> };
>
> static void usb_extcon_detect_cable(struct work_struct *work)
> @@ -68,24 +60,16 @@ static void usb_extcon_detect_cable(struct work_struct
> *work)
> * As we don't have event for USB peripheral cable attached,
> * we simulate USB peripheral attach here.
> */
> - extcon_set_cable_state(info->edev,
> -
> usb_extcon_cable[EXTCON_CABLE_USB_HOST],
> - false);
> - extcon_set_cable_state(info->edev,
> - usb_extcon_cable[EXTCON_CABLE_USB],
> - true);
> + extcon_set_cable_state_(info->edev, EXTCON_USB_HOST,
> false);
> + extcon_set_cable_state_(info->edev, EXTCON_USB, true);
> } else {
> /*
> * ID = 0 means USB HOST cable attached.
> * As we don't have event for USB peripheral cable detached,
> * we simulate USB peripheral detach here.
> */
> - extcon_set_cable_state(info->edev,
> - usb_extcon_cable[EXTCON_CABLE_USB],
> - false);
> - extcon_set_cable_state(info->edev,
> -
> usb_extcon_cable[EXTCON_CABLE_USB_HOST],
> - true);
> + extcon_set_cable_state_(info->edev, EXTCON_USB, false);
> + extcon_set_cable_state_(info->edev, EXTCON_USB_HOST,
> true);
> }
> }
>
> diff --git a/drivers/extcon/extcon.c b/drivers/extcon/extcon.c
> index 2fb5f75..4aeb585 100644
> --- a/drivers/extcon/extcon.c
> +++ b/drivers/extcon/extcon.c
> @@ -3,6 +3,9 @@
> *
> * External connector (extcon) class driver
> *
> + * Copyright (C) 2015 Samsung Electronics
> + * Author: Chanwoo Choi <cw00.c...@samsung.com>
> + *
> * Copyright (C) 2012 Samsung Electronics
> * Author: Donggeun Kim <dg77....@samsung.com>
> * Author: MyungJoo Ham <myungjoo....@samsung.com>
> @@ -32,36 +35,43 @@
> #include <linux/slab.h>
> #include <linux/sysfs.h>
>
> -/*
> - * extcon_cable_name suggests the standard cable names for commonly used
> - * cable types.
> - *
> - * However, please do not use extcon_cable_name directly for extcon_dev
> - * struct's supported_cable pointer unless your device really supports
> - * every single port-type of the following cable names. Please choose cable
> - * names that are actually used in your extcon device.
> - */
> -const char extcon_cable_name[][CABLE_NAME_MAX + 1] = {
> +#define SUPPORTED_CABLE_MAX 32
> +#define CABLE_NAME_MAX 30
> +
> +static const char *extcon_name[] = {
> + [EXTCON_NONE] = "NONE",
> +
> + /* USB external connector */
> [EXTCON_USB] = "USB",
> - [EXTCON_USB_HOST] = "USB-Host",
> + [EXTCON_USB_HOST] = "USB-HOST",
> +
> + /* Charger external connector */
> [EXTCON_TA] = "TA",
> - [EXTCON_FAST_CHARGER] = "Fast-charger",
> - [EXTCON_SLOW_CHARGER] = "Slow-charger",
> - [EXTCON_CHARGE_DOWNSTREAM] = "Charge-downstream",
> + [EXTCON_FAST_CHARGER] = "FAST-CHARGER",
> + [EXTCON_SLOW_CHARGER] = "SLOW-CHARGER",
> + [EXTCON_CHARGE_DOWNSTREAM] = "CHARGE-DOWNSTREAM",
> +
> + /* Audio/Video external connector */
> + [EXTCON_LINE_IN] = "LINE-IN",
> + [EXTCON_LINE_OUT] = "LINE-OUT",
> + [EXTCON_MICROPHONE] = "MICROPHONE",
> + [EXTCON_HEADPHONE] = "HEADPHONE",
> +
> [EXTCON_HDMI] = "HDMI",
> [EXTCON_MHL] = "MHL",
> [EXTCON_DVI] = "DVI",
> [EXTCON_VGA] = "VGA",
> - [EXTCON_DOCK] = "Dock",
> - [EXTCON_LINE_IN] = "Line-in",
> - [EXTCON_LINE_OUT] = "Line-out",
> - [EXTCON_MIC_IN] = "Microphone",
> - [EXTCON_HEADPHONE_OUT] = "Headphone",
> - [EXTCON_SPDIF_IN] = "SPDIF-in",
> - [EXTCON_SPDIF_OUT] = "SPDIF-out",
> - [EXTCON_VIDEO_IN] = "Video-in",
> - [EXTCON_VIDEO_OUT] = "Video-out",
> - [EXTCON_MECHANICAL] = "Mechanical",
> + [EXTCON_SPDIF_IN] = "SPDIF-IN",
> + [EXTCON_SPDIF_OUT] = "SPDIF-OUT",
> + [EXTCON_VIDEO_IN] = "VIDEO-IN",
> + [EXTCON_VIDEO_OUT] = "VIDEO-OUT",
> +
> + /* Etc external connector */
> + [EXTCON_DOCK] = "DOCK",
> + [EXTCON_JIG] = "JIG",
> + [EXTCON_MECHANICAL] = "MECHANICAL",
> +
> + NULL,
> };
>
> static struct class *extcon_class;
> @@ -118,11 +128,9 @@ static ssize_t state_show(struct device *dev, struct
> device_attribute *attr,
> if (edev->max_supported == 0)
> return sprintf(buf, "%u\n", edev->state);
>
> - for (i = 0; i < SUPPORTED_CABLE_MAX; i++) {
> - if (!edev->supported_cable[i])
> - break;
> + for (i = 0; i < edev->max_supported; i++) {
> count += sprintf(buf + count, "%s=%d\n",
> - edev->supported_cable[i],
> + extcon_name[edev->supported_cable[i]],
> !!(edev->state & (1 << i)));
> }
>
> @@ -171,9 +179,10 @@ static ssize_t cable_name_show(struct device *dev,
> {
> struct extcon_cable *cable = container_of(attr, struct extcon_cable,
> attr_name);
> + int i = cable->cable_index;
>
> return sprintf(buf, "%s\n",
> - cable->edev->supported_cable[cable->cable_index]);
> + extcon_name[cable->edev->supported_cable[i]]);
> }
>
> static ssize_t cable_state_show(struct device *dev,
> @@ -282,39 +291,57 @@ int extcon_set_state(struct extcon_dev *edev, u32
> state)
> }
> EXPORT_SYMBOL_GPL(extcon_set_state);
>
> -/**
> - * extcon_find_cable_index() - Get the cable index based on the cable name.
> - * @edev: the extcon device that has the cable.
> - * @cable_name: cable name to be searched.
> - *
> - * Note that accessing a cable state based on cable_index is faster than
> - * cable_name because using cable_name induces a loop with strncmp().
> - * Thus, when get/set_cable_state is repeatedly used, using cable_index
> - * is recommended.
> - */
> -int extcon_find_cable_index(struct extcon_dev *edev, const char *cable_name)
> +static int extcon_find_cable_index(struct extcon_dev *edev,
> + const char *cable_name)
> {
> + enum extcon id = EXTCON_NONE;
> int i;
>
> - if (edev->supported_cable) {
> - for (i = 0; edev->supported_cable[i]; i++) {
> - if (!strncmp(edev->supported_cable[i],
> - cable_name, CABLE_NAME_MAX))
> - return i;
> + if (edev->max_supported == 0)
> + return -EINVAL;
> +
> + /* Find the the number of extcon cable */
> + for (i = 0; i < __EXTCON_END; i++) {
> + if (!extcon_name[i])
> + continue;
> + if (!strncmp(extcon_name[i], cable_name, CABLE_NAME_MAX))
> {
> + id = i;
> + break;
> }
> }
>
> + if (id == EXTCON_NONE)
> + return -EINVAL;
> +
> + /* Find the the index of extcon cable in edev->supported_cable */
> + for (i = 0; i < edev->max_supported; i++) {
> + if (edev->supported_cable[i] == id)
> + return i;
> + }
> +
> return -EINVAL;
> }
> -EXPORT_SYMBOL_GPL(extcon_find_cable_index);
>
> /**
> * extcon_get_cable_state_() - Get the status of a specific cable.
> * @edev: the extcon device that has the cable.
> - * @index: cable index that can be retrieved by extcon_find_cable_index().
> + * @id: the unique id of each external connector in extcon
> enumeration.
> */
> -int extcon_get_cable_state_(struct extcon_dev *edev, int index)
> +int extcon_get_cable_state_(struct extcon_dev *edev, const enum extcon id)
> {
> + int i, index = -EINVAL;
> +
> + /* Find the the index of extcon cable in edev->supported_cable */
> + for (i = 0; edev->max_supported < i; i++) {
> + if (edev->supported_cable[i] == id) {
> + index = i;
> + break;
> + }
> + }
> +
> + if (i == edev->max_supported)
> + return -EINVAL;
> +
> if (index < 0 || (edev->max_supported && edev->max_supported <=
> index))
> return -EINVAL;
>
> @@ -339,15 +366,27 @@ EXPORT_SYMBOL_GPL(extcon_get_cable_state);
> /**
> * extcon_set_cable_state_() - Set the status of a specific cable.
> * @edev: the extcon device that has the cable.
> - * @index: cable index that can be retrieved by
> - * extcon_find_cable_index().
> - * @cable_state: the new cable status. The default semantics is
> + * @id: the unique id of each external connector
> + * in extcon enumeration.
> + * @state: the new cable status. The default semantics is
> * true: attached / false: detached.
> */
> -int extcon_set_cable_state_(struct extcon_dev *edev,
> - int index, bool cable_state)
> +int extcon_set_cable_state_(struct extcon_dev *edev, enum extcon id,
> + bool cable_state)
> {
> u32 state;
> + int i, index = -EINVAL;
> +
> + /* Find the the index of extcon cable in edev->supported_cable */
> + for (i = 0; i < edev->max_supported; i++) {
> + if (edev->supported_cable[i] == id) {
> + index = i;
> + break;
> + }
> + }
> +
> + if (i == edev->max_supported)
> + return -EINVAL;
>
> if (index < 0 || (edev->max_supported && edev->max_supported <=
> index))
> return -EINVAL;
> @@ -605,7 +644,7 @@ static void dummy_sysfs_dev_release(struct device
> *dev)
> *
> * Return the pointer of extcon device if success or ERR_PTR(err) if fail
> */
> -struct extcon_dev *extcon_dev_allocate(const char **supported_cable)
> +struct extcon_dev *extcon_dev_allocate(const enum extcon
> *supported_cable)
> {
> struct extcon_dev *edev;
>
> @@ -659,7 +698,7 @@ static void devm_extcon_dev_release(struct device
> *dev, void *res)
> * or ERR_PTR(err) if fail
> */
> struct extcon_dev *devm_extcon_dev_allocate(struct device *dev,
> - const char **supported_cable)
> + const enum extcon *supported_cable)
> {
> struct extcon_dev **ptr, *edev;
>
> @@ -709,17 +748,15 @@ int extcon_dev_register(struct extcon_dev *edev)
> return ret;
> }
>
> - if (edev->supported_cable) {
> - /* Get size of array */
> - for (index = 0; edev->supported_cable[index]; index++)
> - ;
> - edev->max_supported = index;
> - } else {
> - edev->max_supported = 0;
> - }
> + if (!edev->supported_cable)
> + return -EINVAL;
>
> + for (; edev->supported_cable[index] != EXTCON_NONE; index++);
> +
> + edev->max_supported = index;
> if (index > SUPPORTED_CABLE_MAX) {
> - dev_err(&edev->dev, "extcon: maximum number of supported
> cables exceeded.\n");
> + dev_err(&edev->dev,
> + "exceed the maximum number of supported cables\n");
> return -EINVAL;
> }
>
> @@ -1070,6 +1107,7 @@ static void __exit extcon_class_exit(void)
> }
> module_exit(extcon_class_exit);
>
> +MODULE_AUTHOR("Chanwoo Choi <cw00.c...@samsung.com>");
> MODULE_AUTHOR("Mike Lockwood <lockw...@android.com>");
> MODULE_AUTHOR("Donggeun Kim <dg77....@samsung.com>");
> MODULE_AUTHOR("MyungJoo Ham <myungjoo....@samsung.com>");
> diff --git a/include/linux/extcon.h b/include/linux/extcon.h
> index 799474d9d..de158a1 100644
> --- a/include/linux/extcon.h
> +++ b/include/linux/extcon.h
> @@ -1,6 +1,9 @@
> /*
> * External connector (extcon) class driver
> *
> + * Copyright (C) 2015 Samsung Electronics
> + * Author: Chanwoo Choi <cw00.c...@samsung.com>
> + *
> * Copyright (C) 2012 Samsung Electronics
> * Author: Donggeun Kim <dg77....@samsung.com>
> * Author: MyungJoo Ham <myungjoo....@samsung.com>
> @@ -27,8 +30,41 @@
> #include <linux/notifier.h>
> #include <linux/sysfs.h>
>
> -#define SUPPORTED_CABLE_MAX 32
> -#define CABLE_NAME_MAX 30
> +enum extcon {
> + EXTCON_NONE = 0x0, /* NONE */
> +
> + /* USB external connector */
> + EXTCON_USB = 0x1, /* USB */
> + EXTCON_USB_HOST = 0x2, /* USB-HOST */
> +
> + /* Charger external connector */
> + EXTCON_TA = 0x10, /* TA */
> + EXTCON_FAST_CHARGER = 0x11, /* FAST-CHARGER */
> + EXTCON_SLOW_CHARGER = 0x12, /* SLOW-CHARGER */
> + EXTCON_CHARGE_DOWNSTREAM= 0x13, /* CHARGE-
> DOWNSTREAM */
> +
> + /* Audio/Video external connector */
> + EXTCON_LINE_IN = 0x20, /* LINE-IN */
> + EXTCON_LINE_OUT = 0x21, /* LINE-OUT */
> + EXTCON_MICROPHONE = 0x22, /* MICROPHONE */
> + EXTCON_HEADPHONE = 0x23, /* HEADPHONE */
> +
> + EXTCON_HDMI = 0x30, /* HDMI */
> + EXTCON_MHL = 0x31, /* MHL */
> + EXTCON_DVI = 0x32, /* DVI */
> + EXTCON_VGA = 0x33, /* VGA */
> + EXTCON_SPDIF_IN = 0x34, /* SPDIF-IN */
> + EXTCON_SPDIF_OUT = 0x35, /* SPDIF-OUT */
> + EXTCON_VIDEO_IN = 0x36, /* VIDEO-IN */
> + EXTCON_VIDEO_OUT = 0x37, /* VIDEO-OUT */
> +
> + /* Etc external connector */
> + EXTCON_DOCK = 0x50, /* DOCK */
> + EXTCON_JIG = 0x51, /* JIG */
> + EXTCON_MECHANICAL = 0x52, /* MECHANICAL */
> +
> + __EXTCON_END,
> +};
>
> /*
> * The standard cable name is to help support general notifier
> @@ -48,29 +84,6 @@
> * you don't need such convention. This convention is helpful when
> * notifier can distinguish but notifiee cannot.
> */
> -enum extcon_cable_name {
> - EXTCON_USB = 0,
> - EXTCON_USB_HOST,
> - EXTCON_TA, /* Travel Adaptor */
> - EXTCON_FAST_CHARGER,
> - EXTCON_SLOW_CHARGER,
> - EXTCON_CHARGE_DOWNSTREAM, /* Charging an external device
> */
> - EXTCON_HDMI,
> - EXTCON_MHL,
> - EXTCON_DVI,
> - EXTCON_VGA,
> - EXTCON_DOCK,
> - EXTCON_LINE_IN,
> - EXTCON_LINE_OUT,
> - EXTCON_MIC_IN,
> - EXTCON_HEADPHONE_OUT,
> - EXTCON_SPDIF_IN,
> - EXTCON_SPDIF_OUT,
> - EXTCON_VIDEO_IN,
> - EXTCON_VIDEO_OUT,
> - EXTCON_MECHANICAL,
> -};
> -extern const char extcon_cable_name[][CABLE_NAME_MAX + 1];
>
> struct extcon_cable;
>
> @@ -113,7 +126,7 @@ struct extcon_cable;
> struct extcon_dev {
> /* Optional user initializing data */
> const char *name;
> - const char **supported_cable;
> + const enum extcon *supported_cable;
> const u32 *mutually_exclusive;
>
> /* Optional callbacks to override class functions */
> @@ -194,10 +207,10 @@ extern struct extcon_dev
> *extcon_get_extcon_dev(const char *extcon_name);
> /*
> * Following APIs control the memory of extcon device.
> */
> -extern struct extcon_dev *extcon_dev_allocate(const char **cables);
> +extern struct extcon_dev *extcon_dev_allocate(const enum extcon *cable);
> extern void extcon_dev_free(struct extcon_dev *edev);
> extern struct extcon_dev *devm_extcon_dev_allocate(struct device *dev,
> - const char **cables);
> + const enum extcon *cable);
> extern void devm_extcon_dev_free(struct device *dev, struct extcon_dev
> *edev);
>
> /*
> @@ -216,13 +229,10 @@ extern int extcon_update_state(struct extcon_dev
> *edev, u32 mask, u32 state);
>
> /*
> * get/set_cable_state access each bit of the 32b encoded state value.
> - * They are used to access the status of each cable based on the cable_name
> - * or cable_index, which is retrieved by extcon_find_cable_index
> + * They are used to access the status of each cable based on the cable_name.
> */
> -extern int extcon_find_cable_index(struct extcon_dev *sdev,
> - const char *cable_name);
> -extern int extcon_get_cable_state_(struct extcon_dev *edev, int cable_index);
> -extern int extcon_set_cable_state_(struct extcon_dev *edev, int cable_index,
> +extern int extcon_get_cable_state_(struct extcon_dev *edev, enum extcon id);
> +extern int extcon_set_cable_state_(struct extcon_dev *edev, enum extcon id,
> bool cable_state);
>
> extern int extcon_get_cable_state(struct extcon_dev *edev,
> @@ -281,7 +291,7 @@ static inline int devm_extcon_dev_register(struct device
> *dev,
> static inline void devm_extcon_dev_unregister(struct device *dev,
> struct extcon_dev *edev) { }
>
> -static inline struct extcon_dev *extcon_dev_allocate(const char **cables)
> +static inline struct extcon_dev *extcon_dev_allocate(const enum extcon
> *cable)
> {
> return ERR_PTR(-ENOSYS);
> }
> @@ -289,7 +299,7 @@ static inline struct extcon_dev
> *extcon_dev_allocate(const char **cables)
> static inline void extcon_dev_free(struct extcon_dev *edev) { }
>
> static inline struct extcon_dev *devm_extcon_dev_allocate(struct device *dev,
> - const char **cables)
> + const enum extcon *cable)
> {
> return ERR_PTR(-ENOSYS);
> }
> @@ -312,20 +322,14 @@ static inline int extcon_update_state(struct
> extcon_dev *edev, u32 mask,
> return 0;
> }
>
> -static inline int extcon_find_cable_index(struct extcon_dev *edev,
> - const char *cable_name)
> -{
> - return 0;
> -}
> -
> static inline int extcon_get_cable_state_(struct extcon_dev *edev,
> - int cable_index)
> + enum extcon id)
> {
> return 0;
> }
>
> static inline int extcon_set_cable_state_(struct extcon_dev *edev,
> - int cable_index, bool cable_state)
> + enum extcon id, bool cable_state)
> {
> return 0;
> }
> diff --git a/include/linux/extcon/extcon-adc-jack.h
> b/include/linux/extcon/extcon-adc-jack.h
> index 9ca958c..53c6080 100644
> --- a/include/linux/extcon/extcon-adc-jack.h
> +++ b/include/linux/extcon/extcon-adc-jack.h
> @@ -44,7 +44,7 @@ struct adc_jack_cond {
> * @consumer_channel: Unique name to identify the channel on the
> consumer
> * side. This typically describes the channels used within
> * the consumer. E.g. 'battery_voltage'
> - * @cable_names: array of cable names ending with null.
> + * @cable_names: array of extcon id for supported cables.
> * @adc_contitions: array of struct adc_jack_cond conditions ending
> * with .state = 0 entry. This describes how to decode
> * adc values into extcon state.
> @@ -58,8 +58,7 @@ struct adc_jack_pdata {
> const char *name;
> const char *consumer_channel;
>
> - /* The last entry should be NULL */
> - const char **cable_names;
> + const enum extcon *cable_names;
>
> /* The last entry's state should be 0 */
> struct adc_jack_cond *adc_conditions;
> --
> 1.8.5.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
