On Wed, May 27, 2015 at 02:03:38PM -0500, Aravind Gopalakrishnan wrote:
> For bank 4 errors, MCE logging and reporting is done only on
> node base cores. Refer D18F3x44[NbMcaToMstCpuEn] field in
> Fam10h and later BKDGs.
>
> This patch ensures that we inject the error on the node base core
> for bank 4 errors. Otherwise, triggering #MC or apic interrupts on
> a non node base core would not have any effect on the system.
> (i.e), we would not see any relevant output on kernel logs for
> the error we just injected.
>
> Signed-off-by: Aravind Gopalakrishnan <[email protected]>
> ---
> drivers/edac/mce_amd_inj.c | 76
> ++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 76 insertions(+)
>
> diff --git a/drivers/edac/mce_amd_inj.c b/drivers/edac/mce_amd_inj.c
> index ca5b29f..bd44ba4 100644
> --- a/drivers/edac/mce_amd_inj.c
> +++ b/drivers/edac/mce_amd_inj.c
> @@ -17,9 +17,12 @@
> #include <linux/cpu.h>
> #include <linux/string.h>
> #include <linux/uaccess.h>
> +#include <linux/pci.h>
> #include <asm/mce.h>
> +#include <asm/amd_nb.h>
>
> #include "mce_amd.h"
> +#include "amd64_edac.h"
>
> /*
> * Collect all the MCi_XXX settings
> @@ -205,6 +208,65 @@ static void trigger_thr_int(void *info)
> asm volatile("int $249");
> }
>
> +static u32 amd_get_num_nodes(void)
> +{
> + u32 nodes = 1;
> +
> + if (cpu_has_topoext) {
> + u32 ecx;
> +
> + ecx = cpuid_ecx(0x8000001e);
> + nodes = ((ecx >> 8) & 7) + 1;
> + } else if (static_cpu_has(X86_FEATURE_NODEID_MSR)) {
> + u64 value;
> +
> + rdmsrl(MSR_FAM10H_NODE_ID, value);
> + nodes = ((value >> 3) & 7) + 1;
> + }
So we already do that (and more) in amd_get_topology(). I'm thinking
you should take this function out of the CONFIG_X86_HT ifdeffery (also
in its caller amd_detect_cmp()) and you should save "nodes" in a local
static variable called nodes_per_processor and a small accessor called
amd_get_nodes_cnt() should return it. Similar to amd_get_nb_id().
Don't forget to add a comment explaning what that nodes_per_processor
means.
And then amd_mce_inj.c will simply use it instead of duplicating that
information here.
Please do that in 2 pre-patches.
> +
> + return nodes;
> +}
> +
> +static u32 amd_get_nbc_for_node(int node_id)
> +{
> + struct cpuinfo_x86 *c = &boot_cpu_data;
> + u32 nodes, cores_per_node;
> +
> + nodes = amd_get_num_nodes();
> + cores_per_node = c->x86_max_cores / nodes;
> +
> + return cores_per_node * node_id;
> +}
> +
> +static void toggle_nb_mca_mst_cpu(u16 nid)
> +{
> + struct pci_dev *F3 = node_to_amd_nb(nid)->misc;
> + u32 val;
> + int err;
> +
> + if (!F3)
> + return;
> +
> + err = pci_read_config_dword(F3, NBCFG, &val);
> + if (err) {
> + pr_err("%s: Error reading F%dx%03x.\n", __func__,
> + PCI_FUNC(F3->devfn),
> + NBCFG);
> + return;
> + }
> +
> + if (!(val & BIT(27))) {
> + pr_err("%s: BIOS not setting D18F3x44[NbMcaToMstCpuEn]."
> + "Doing that here\n", __func__);
WARNING: quoted string split across lines
#99: FILE: drivers/edac/mce_amd_inj.c:260:
+ pr_err("%s: BIOS not setting D18F3x44[NbMcaToMstCpuEn]."
+ "Doing that here\n", __func__);
Do integrate checkpatch.pl into your workflow. It is sometimes right.
> + val |= BIT(27);
> + err = pci_write_config_dword(F3, NBCFG, val);
> + if (err)
> + pr_err("%s: Error writing F%dx%03x.\n", __func__,
> + PCI_FUNC(F3->devfn),
> + NBCFG);
> + }
> +}
--
Regards/Gruss,
Boris.
ECO tip #101: Trim your mails when you reply.
--
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
