We're currently using a fixed frequency clock specified in the DT, so
enabling is a no-op. However, the RPi firmware-based clocks driver
can actually disable unused clocks, so when switching to use it we
ended up losing our MMC clock once all devices were probed.
Signed-off-by: Eric Anholt <e...@anholt.net>
---
v2: Re-disable our clock on sdhci_add_host() failure.
drivers/mmc/host/sdhci-bcm2835.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/sdhci-bcm2835.c b/drivers/mmc/host/sdhci-bcm2835.c
index 32f4046..1c65d46 100644
--- a/drivers/mmc/host/sdhci-bcm2835.c
+++ b/drivers/mmc/host/sdhci-bcm2835.c
@@ -172,12 +172,19 @@ static int bcm2835_sdhci_probe(struct platform_device
*pdev)
ret = PTR_ERR(pltfm_host->clk);
goto err;
}
+ ret = clk_prepare_enable(pltfm_host->clk);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to enable host clk\n");
+ goto err;
+ }
ret = sdhci_add_host(host);
if (ret)
- goto err;
+ goto err_clk;
return 0;
+err_clk:
+ clk_disable_unprepare(pltfm_host->clk);
err:
sdhci_pltfm_free(pdev);
return ret;
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
