james, I remember that xlinit in 2.6 kernel only works when BIOS option-rom really init fb. It can not work if the BIOS option rom is not executed.
For 2.4, it reversed, it can not work if BIOS opton-rom is executed. Only work if BIOS don't excute the option rom. YH On 8/12/05, James Simmons <[EMAIL PROTECTED]> wrote: > > > > I have the following issue. I am trying to get an ATI Rage XL chip > > > working on a MIPS-based processor, with a 2.6.11-based kernel from > > > linux-mips.org. Now, I know that this was working with a 2.4.25-based > > > kernel previously. > > > > Okay, the 2.4 driver is more intrusive, it programs the chip from start as > > much as possible, while the 2.6 driver tries to depend on Bios settings. I > > haven't checked out the 2.6 driver enough to see if it is still possible > > to program from scratch. > > The code is there to program the chip from scratch. Just select > > "Rage XL No-BIOS Init support" > > The last time I tried it it didn't work. If we could get it working that > would be great. > > > Yes, according to my register data sheet a 7 means the memory clock > > frequency is derived from DLLCLK. Unfortunately I don't know what this > > DLLCLK is. I think it means the chip isn't properly initialized yet and it > > clocks the memory from a safe clock source to allow the computer to start. > > > > However, we most likely have no way to find out the speed of this DLLCLK. > > > > The memory clock frequency is important for the driver to be able to set a > > display mode; it needs to program a memory reload frequency into the chip > > which depends on the memory frequency. > > Their is code in xlint.c that should properly set this. Have to debug that > code. > > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to [EMAIL PROTECTED] > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ > - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/