On Sat, Jul 11, 2015 at 12:42 AM, Hartmut Knaack <knaac...@gmx.de> wrote:
> Cristina Opriceana schrieb am 10.07.2015 um 12:56:
>> Replace printf error messages with fprintf(stderr, ...) in order
>> to ensure consistency and to make faults easier to identify.
>> This patch uses coccinelle to detect and apply the changes.
>>
>
> Hi Cristina,
> I just had a look at the series. You have all cases I regard necessary
> covered. There are however a few cases which probably qualify as error
> messages, too. Please see inline.
> However, for my personal taste, this could have been merged all in a
> single patch. Especially the third patch should have been included in
> this one (as during review, people certainly think that you missed the
> second line, just to find it fixed two patches later).
Hi,
Yes, I could have included all in a single patch, but I tried to
automatize this task and build a rather generic semantic patch in
coccinelle for the substitutions. Had I included all in one patch, the
changes with coccinelle wouldn't have been differentiated from the
other ones. If that is okay, I think I can merge them in one patch.
>> Signed-off-by: Cristina Opriceana <cristina.oprice...@gmail.com>
>> ---
>> Changes in v2:
>> - s/failiure/failure
>>
>> tools/iio/generic_buffer.c | 17 ++++++++++-------
>> tools/iio/iio_event_monitor.c | 6 +++---
>> tools/iio/iio_utils.c | 34 ++++++++++++++++++++--------------
>> 3 files changed, 33 insertions(+), 24 deletions(-)
>>
>> diff --git a/tools/iio/generic_buffer.c b/tools/iio/generic_buffer.c
>> index 0e73723..2f4e12f 100644
>> --- a/tools/iio/generic_buffer.c
>> +++ b/tools/iio/generic_buffer.c
>> @@ -271,7 +271,7 @@ int main(int argc, char **argv)
>> }
>>
>> if (device_name == NULL) {
>> - printf("Device name not set\n");
>> + fprintf(stderr, "Device name not set\n");
>> print_usage();
>> return -1;
>> }
>> @@ -279,7 +279,7 @@ int main(int argc, char **argv)
>> /* Find the device requested */
>> dev_num = find_type_by_name(device_name, "iio:device");
>> if (dev_num < 0) {
>> - printf("Failed to find the %s\n", device_name);
>> + fprintf(stderr, "Failed to find the %s\n", device_name);
>> return dev_num;
>> }
>>
>> @@ -307,7 +307,8 @@ int main(int argc, char **argv)
>> /* Verify the trigger exists */
>> trig_num = find_type_by_name(trigger_name, "trigger");
>> if (trig_num < 0) {
>> - printf("Failed to find the trigger %s\n",
>> trigger_name);
>> + fprintf(stderr, "Failed to find the trigger %s\n",
>> + trigger_name);
>> ret = trig_num;
>> goto error_free_triggername;
>> }
>> @@ -323,7 +324,7 @@ int main(int argc, char **argv)
>> */
>> ret = build_channel_array(dev_dir_name, &channels, &num_channels);
>> if (ret) {
>> - printf("Problem reading scan element information\n");
>> + fprintf(stderr, "Problem reading scan element information\n");
>> printf("diag %s\n", dev_dir_name);
>
> My preference would even be to print it all in just one fprintf.
I thought so, also, but the string would go beyond 80 characters and
would have to be split which is ugly and brings a warning on it.
>> goto error_free_triggername;
>> }
>> @@ -350,7 +351,8 @@ int main(int argc, char **argv)
>> dev_dir_name,
>> trigger_name);
>> if (ret < 0) {
>> - printf("Failed to write current_trigger file\n");
>> + fprintf(stderr,
>> + "Failed to write current_trigger file\n");
>> goto error_free_buf_dir_name;
>> }
>> }
>> @@ -382,7 +384,7 @@ int main(int argc, char **argv)
>> fp = open(buffer_access, O_RDONLY | O_NONBLOCK);
>> if (fp == -1) { /* TODO: If it isn't there make the node */
>> ret = -errno;
>> - printf("Failed to open %s\n", buffer_access);
>> + fprintf(stderr, "Failed to open %s\n", buffer_access);
>> goto error_free_buffer_access;
>> }
>>
>
> At line 410 we have a block:
> read_size = read(fp, data, toread * scan_size);
> if (read_size < 0) {
> if (errno == EAGAIN) {
> printf("nothing available\n");
> continue;
>
> I'm tempted to say,that this should go to stderr, as well. Any opinions?
I see it more as an informing note, since the device continues looping
for data, but it could be considered an error as well.
>> @@ -431,7 +433,8 @@ int main(int argc, char **argv)
>> ret = write_sysfs_string("trigger/current_trigger",
>> dev_dir_name, "NULL");
>> if (ret < 0)
>> - printf("Failed to write to %s\n", dev_dir_name);
>> + fprintf(stderr, "Failed to write to %s\n",
>> + dev_dir_name);
>>
>> error_close_buffer_access:
>> if (close(fp) == -1)
>> diff --git a/tools/iio/iio_event_monitor.c b/tools/iio/iio_event_monitor.c
>> index 703f4cb..843bc4c 100644
>> --- a/tools/iio/iio_event_monitor.c
>> +++ b/tools/iio/iio_event_monitor.c
>
> At line 217:
> if (!event_is_known(event)) {
> printf("Unknown event: time: %lld, id: %llx\n",
> event->timestamp, event->id);
>
> return;
> Better have this on stderr, as well?
This is more suitable for stderr, indeed.
>> @@ -278,14 +278,14 @@ int main(int argc, char **argv)
>> fd = open(chrdev_name, 0);
>> if (fd == -1) {
>> ret = -errno;
>> - fprintf(stdout, "Failed to open %s\n", chrdev_name);
>> + fprintf(stderr, "Failed to open %s\n", chrdev_name);
>> goto error_free_chrdev_name;
>> }
>>
>> ret = ioctl(fd, IIO_GET_EVENT_FD_IOCTL, &event_fd);
>> if (ret == -1 || event_fd == -1) {
>> ret = -errno;
>> - fprintf(stdout, "Failed to retrieve event fd\n");
>> + fprintf(stderr, "Failed to retrieve event fd\n");
>> if (close(fd) == -1)
>> perror("Failed to close character device file");
>>
>
> A similar borderline case as above in line 301:
> ret = read(event_fd, &event, sizeof(event));
> if (ret == -1) {
> if (errno == EAGAIN) {
> printf("nothing available\n");
> continue;
>
>> @@ -311,7 +311,7 @@ int main(int argc, char **argv)
>> }
>>
>> if (ret != sizeof(event)) {
>> - printf("Reading event failed!\n");
>> + fprintf(stderr, "Reading event failed!\n");
>> ret = -EIO;
>> break;
>> }
>> diff --git a/tools/iio/iio_utils.c b/tools/iio/iio_utils.c
>> index 8fb3214..46dfa3f 100644
>> --- a/tools/iio/iio_utils.c
>> +++ b/tools/iio/iio_utils.c
>> @@ -140,7 +140,8 @@ int iioutils_get_type(unsigned *is_signed, unsigned
>> *bytes, unsigned *bits_used,
>> sysfsfp = fopen(filename, "r");
>> if (sysfsfp == NULL) {
>> ret = -errno;
>> - printf("failed to open %s\n", filename);
>> + fprintf(stderr, "failed to open %s\n",
>> + filename);
>> goto error_free_filename;
>> }
>>
>> @@ -152,7 +153,8 @@ int iioutils_get_type(unsigned *is_signed, unsigned
>> *bytes, unsigned *bits_used,
>> &padint, shift);
>> if (ret < 0) {
>> ret = -errno;
>> - printf("failed to pass scan type
>> description\n");
>> + fprintf(stderr,
>> + "failed to pass scan type
>> description\n");
>> goto error_close_sysfsfp;
>> } else if (ret != 5) {
>> ret = -EIO;
>> @@ -170,7 +172,8 @@ int iioutils_get_type(unsigned *is_signed, unsigned
>> *bytes, unsigned *bits_used,
>> *is_signed = (signchar == 's');
>> if (fclose(sysfsfp)) {
>> ret = -errno;
>> - printf("Failed to close %s\n", filename);
>> + fprintf(stderr, "Failed to close %s\n",
>> + filename);
>> goto error_free_filename;
>> }
>>
>> @@ -454,7 +457,8 @@ int build_channel_array(const char *device_dir,
>> sysfsfp = fopen(filename, "r");
>> if (sysfsfp == NULL) {
>> ret = -errno;
>> - printf("failed to open %s\n", filename);
>> + fprintf(stderr, "failed to open %s\n",
>> + filename);
>> free(filename);
>> goto error_cleanup_array;
>> }
>> @@ -581,11 +585,13 @@ int find_type_by_name(const char *name, const char
>> *type)
>> ret = sscanf(ent->d_name + strlen(type), "%d",
>> &number);
>> if (ret < 0) {
>> ret = -errno;
>> - printf("failed to read element number\n");
>> + fprintf(stderr,
>> + "failed to read element number\n");
>> goto error_close_dir;
>> } else if (ret != 1) {
>> ret = -EIO;
>> - printf("failed to match element number\n");
>> + fprintf(stderr,
>> + "failed to match element number\n");
>> goto error_close_dir;
>> }
>>
>> @@ -664,7 +670,7 @@ static int _write_sysfs_int(const char *filename, const
>> char *basedir, int val,
>> sysfsfp = fopen(temp, "w");
>> if (sysfsfp == NULL) {
>> ret = -errno;
>> - printf("failed to open %s\n", temp);
>> + fprintf(stderr, "failed to open %s\n", temp);
>> goto error_free;
>> }
>>
>> @@ -685,7 +691,7 @@ static int _write_sysfs_int(const char *filename, const
>> char *basedir, int val,
>> sysfsfp = fopen(temp, "r");
>> if (sysfsfp == NULL) {
>> ret = -errno;
>> - printf("failed to open %s\n", temp);
>> + fprintf(stderr, "failed to open %s\n", temp);
>> goto error_free;
>> }
>>
>> @@ -750,7 +756,7 @@ static int _write_sysfs_string(const char *filename,
>> const char *basedir,
>> char *temp = malloc(strlen(basedir) + strlen(filename) + 2);
>>
>> if (temp == NULL) {
>> - printf("Memory allocation failed\n");
>> + fprintf(stderr, "Memory allocation failed\n");
>> return -ENOMEM;
>> }
>>
>> @@ -761,7 +767,7 @@ static int _write_sysfs_string(const char *filename,
>> const char *basedir,
>> sysfsfp = fopen(temp, "w");
>> if (sysfsfp == NULL) {
>> ret = -errno;
>> - printf("Could not open %s\n", temp);
>> + fprintf(stderr, "Could not open %s\n", temp);
>> goto error_free;
>> }
>>
>> @@ -782,7 +788,7 @@ static int _write_sysfs_string(const char *filename,
>> const char *basedir,
>> sysfsfp = fopen(temp, "r");
>> if (sysfsfp == NULL) {
>> ret = -errno;
>> - printf("Could not open file to verify\n");
>> + fprintf(stderr, "Could not open file to verify\n");
>> goto error_free;
>> }
>>
>> @@ -856,7 +862,7 @@ int read_sysfs_posint(const char *filename, const char
>> *basedir)
>> char *temp = malloc(strlen(basedir) + strlen(filename) + 2);
>>
>> if (temp == NULL) {
>> - printf("Memory allocation failed");
>> + fprintf(stderr, "Memory allocation failed");
>> return -ENOMEM;
>> }
>>
>> @@ -903,7 +909,7 @@ int read_sysfs_float(const char *filename, const char
>> *basedir, float *val)
>> char *temp = malloc(strlen(basedir) + strlen(filename) + 2);
>>
>> if (temp == NULL) {
>> - printf("Memory allocation failed");
>> + fprintf(stderr, "Memory allocation failed");
>> return -ENOMEM;
>> }
>>
>> @@ -950,7 +956,7 @@ int read_sysfs_string(const char *filename, const char
>> *basedir, char *str)
>> char *temp = malloc(strlen(basedir) + strlen(filename) + 2);
>>
>> if (temp == NULL) {
>> - printf("Memory allocation failed");
>> + fprintf(stderr, "Memory allocation failed");
>> return -ENOMEM;
>> }
>>
>>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
