On Fri, 2015-07-31 at 19:12 +0800, Chen-Yu Tsai wrote: > Enable sun6i DMA engine, sun6i P2WI, PWM, and crypto engine (Security > System) drivers by default. EXTCON is needed by the updated sun4i USB > PHY driver. > > While at it, enable FHANDLE, which is needed by systemd and newer > versions of udev.
You might want to also add CONFIG_CGROUPS which is needed by systemd. > > And get rid of POWER_RESET, as the sun6i power reset driver has been > removed in favor of proper sun6i watchdog support. > > Signed-off-by: Chen-Yu Tsai <w...@csie.org> > --- > arch/arm/configs/sunxi_defconfig | 9 ++++++++- > 1 file changed, 8 insertions(+), 1 deletion(-) > > diff --git a/arch/arm/configs/sunxi_defconfig > b/arch/arm/configs/sunxi_defconfig > index 7ebc346bf9fa..52cc0686524f 100644 > --- a/arch/arm/configs/sunxi_defconfig > +++ b/arch/arm/configs/sunxi_defconfig > @@ -1,3 +1,4 @@ > +CONFIG_FHANDLE=y > CONFIG_NO_HZ=y > CONFIG_HIGH_RES_TIMERS=y > CONFIG_BLK_DEV_INITRD=y > @@ -72,12 +73,12 @@ CONFIG_SERIAL_OF_PLATFORM=y > CONFIG_I2C=y > CONFIG_I2C_CHARDEV=y > CONFIG_I2C_MV64XXX=y > +CONFIG_I2C_SUN6I_P2WI=y > CONFIG_SPI=y > CONFIG_SPI_SUN4I=y > CONFIG_SPI_SUN6I=y > CONFIG_GPIO_SYSFS=y > CONFIG_POWER_SUPPLY=y > -CONFIG_POWER_RESET=y > CONFIG_THERMAL=y > CONFIG_CPU_THERMAL=y > CONFIG_WATCHDOG=y > @@ -109,7 +110,12 @@ CONFIG_RTC_CLASS=y > # CONFIG_RTC_INTF_PROC is not set > CONFIG_RTC_DRV_SUN6I=y > CONFIG_RTC_DRV_SUNXI=y > +CONFIG_DMADEVICES=y > +CONFIG_DMA_SUN6I=y > # CONFIG_IOMMU_SUPPORT is not set > +CONFIG_EXTCON=y > +CONFIG_PWM=y > +CONFIG_PWM_SUN4I=y > CONFIG_PHY_SUN4I_USB=y > CONFIG_PHY_SUN9I_USB=y > CONFIG_EXT4_FS=y > @@ -123,3 +129,4 @@ CONFIG_NLS_CODEPAGE_437=y > CONFIG_NLS_ISO8859_1=y > CONFIG_PRINTK_TIME=y > CONFIG_DEBUG_FS=y > +CONFIG_CRYPTO_DEV_SUN4I_SS=y > -- > 2.5.0 > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
