On 3 August 2015 at 01:44, Robert Jarzmik <robert.jarz...@free.fr> wrote: > Ezequiel Garcia <ezequ...@vanguardiasur.com.ar> writes: > >> Just tested linux-next (hence *without* the patchset) and I see >> the same "Wait time out". In other words, pxa3xx-nand is broken >> on PXA :/ >> >> Interestingly, the culprit doesn't seem to be in pxa3xx-nand itself. >> Reverting the recent commits on pxa3xx-nand doesn't help. >> >> ce914e6 mtd: nand: pxa3xx: fix build on ARM64 >> afca11e mtd: nand: pxa3xx: Switch FIFO draining to jiffies-based timeout >> e5860c1 mtd: pxa3xx_nand: cleanup wait_for_completion handling >> 7c2f717 mtd: pxa3xx_nand: initialiaze pxa3xx_flash_ids to 0 >> ed446cc Merge MTD updates into -next >> e423c90 mtd: pxa3xx_nand: fix driver when num_cs is 0 >> 2454225 mtd: pxa3xx-nand: handle PIO in threaded interrupt >> 8dad038 mtd: nand: pxa3xx: Fix PIO FIFO draining >> b7e46062 mtd: pxa3xx_nand: make the driver work on big-endian systems >> 5b3e507 mtd: nand: pxa3xx: Use ECC strength and step size devicetree binding >> eee0166 mtd: nand: pxa3xx: Clean pxa_ecc_init() error handling >> 17754ad mtd: nand: pxa3xx: Make of_device_id array const >> e634ce5 mtd: nand: pxa3xx: Print actual ECC strength in error message >> >> Yet v3.18 succeeds to pass a few NAND blocks on nandtest. >> >> Robert: any ideas? > Actually yes, I worked on that this weekend. > Would you try the following patch [1] to see if it works for you ? > > The issue I see is that : > - there is a bug in the clk driver for pxa3xx I introduced (CKEN_AB) > - and shutting down the GCU clock prevents the NAND from working (I can't > explain that one yet) >
IIRC, on Armada 370/XP SoCs we have two clocks feeding the NAND controller: one for the NAND logic (not really sure?), and one for the NAND ECC engine. Maybe the GCU feeds the ECC? > Cheers. > > -- > Robert > > [1] Clocks patch Ah, good. I was almost sure it was the clock (after trying a bunch of other stuff it was the only big change left). I'll try this and will let you know. > ---8>--- > diff --git a/drivers/clk/pxa/clk-pxa3xx.c b/drivers/clk/pxa/clk-pxa3xx.c > index c677b9ab5367..a47a0c40f937 100644 > --- a/drivers/clk/pxa/clk-pxa3xx.c > +++ b/drivers/clk/pxa/clk-pxa3xx.c > @@ -126,7 +126,7 @@ PARENTS(pxa3xx_ac97_bus) = { "ring_osc_60mhz", "ac97" }; > PARENTS(pxa3xx_sbus) = { "ring_osc_60mhz", "system_bus" }; > PARENTS(pxa3xx_smemcbus) = { "ring_osc_60mhz", "smemc" }; > > -#define CKEN_AB(bit) ((CKEN_ ## bit > 31) ? &CKENA : &CKENB) > +#define CKEN_AB(bit) ((CKEN_ ## bit > 31) ? &CKENB : &CKENA) > #define PXA3XX_CKEN(dev_id, con_id, parents, mult_lp, div_lp, mult_hp, \ > div_hp, bit, is_lp, flags) \ > PXA_CKEN(dev_id, con_id, bit, parents, mult_lp, div_lp, \ > @@ -136,6 +136,10 @@ PARENTS(pxa3xx_smemcbus) = { "ring_osc_60mhz", "smemc" }; > mult_hp, div_hp, delay) \ > PXA3XX_CKEN(dev_id, con_id, pxa3xx_pbus_parents, mult_lp, \ > div_lp, mult_hp, div_hp, bit, pxa3xx_is_ring_osc_forced, > 0) > +#define PXA3XX_PBUS_CKENF(dev_id, con_id, bit, mult_lp, div_lp, > \ > + mult_hp, div_hp, delay, flag) \ > + PXA3XX_CKEN(dev_id, con_id, pxa3xx_pbus_parents, mult_lp, \ > + div_lp, mult_hp, div_hp, bit, pxa3xx_is_ring_osc_forced, > flag) > #define PXA3XX_CKEN_1RATE(dev_id, con_id, bit, parents) > \ > PXA_CKEN_1RATE(dev_id, con_id, bit, parents, \ > CKEN_AB(bit), (CKEN_ ## bit % 32), 0) > @@ -173,13 +177,13 @@ static struct desc_clk_cken pxa3xx_clocks[] __initdata > = { > > static struct desc_clk_cken pxa300_310_clocks[] __initdata = { > > - PXA3XX_PBUS_CKEN("pxa3xx-gcu", NULL, PXA300_GCU, 1, 1, 1, 1, 0), > - PXA3XX_PBUS_CKEN("pxa3xx-nand", NULL, NAND, 1, 2, 1, 4, 0), > + PXA3XX_PBUS_CKENF("pxa3xx-gcu", NULL, PXA300_GCU, 1, 1, 1, 1, 0, > CLK_IGNORE_UNUSED), > + PXA3XX_PBUS_CKENF("pxa3xx-nand", NULL, NAND, 1, 2, 1, 4, 0, > CLK_IGNORE_UNUSED), > PXA3XX_CKEN_1RATE("pxa3xx-gpio", NULL, GPIO, > pxa3xx_13MHz_bus_parents), > }; > > static struct desc_clk_cken pxa320_clocks[] __initdata = { > - PXA3XX_PBUS_CKEN("pxa3xx-nand", NULL, NAND, 1, 2, 1, 6, 0), > + PXA3XX_PBUS_CKENF("pxa3xx-nand", NULL, NAND, 1, 2, 1, 4, 0, > CLK_IGNORE_UNUSED), > PXA3XX_PBUS_CKEN("pxa3xx-gcu", NULL, PXA320_GCU, 1, 1, 1, 1, 0), > PXA3XX_CKEN_1RATE("pxa3xx-gpio", NULL, GPIO, > pxa3xx_13MHz_bus_parents), > }; > @@ -187,7 +191,7 @@ static struct desc_clk_cken pxa320_clocks[] __initdata = { > static struct desc_clk_cken pxa93x_clocks[] __initdata = { > > PXA3XX_PBUS_CKEN("pxa3xx-gcu", NULL, PXA300_GCU, 1, 1, 1, 1, 0), > - PXA3XX_PBUS_CKEN("pxa3xx-nand", NULL, NAND, 1, 2, 1, 4, 0), > + PXA3XX_PBUS_CKENF("pxa3xx-nand", NULL, NAND, 1, 2, 1, 4, 0, > CLK_IGNORE_UNUSED), > PXA3XX_CKEN_1RATE("pxa93x-gpio", NULL, GPIO, > pxa3xx_13MHz_bus_parents), > }; > -- Ezequiel GarcĂa, VanguardiaSur www.vanguardiasur.com.ar -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/