4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Roger Quadros <rog...@ti.com>
commit 2acb5c301edf39ab6d066687ce70da1166e4de9e upstream.
Driver core sets "default" pinmux on on probe and CAN driver
sets "sleep" pinmux during register. This causes a small window
where the CAN pins are in "default" state with the DCAN module
being disabled.
Change the "default" state to be like sleep so this glitch is
avoided. Add a new "active" state that is used by the driver
when CAN is actually active.
Signed-off-by: Roger Quadros <rog...@ti.com>
Signed-off-by: Marc Kleine-Budde <m...@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gre...@linuxfoundation.org>
---
arch/arm/boot/dts/dra7-evm.dts | 5 +++--
arch/arm/boot/dts/dra72-evm.dts | 5 +++--
2 files changed, 6 insertions(+), 4 deletions(-)
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -686,7 +686,8 @@
&dcan1 {
status = "ok";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&dcan1_pins_default>;
+ pinctrl-names = "default", "sleep", "active";
+ pinctrl-0 = <&dcan1_pins_sleep>;
pinctrl-1 = <&dcan1_pins_sleep>;
+ pinctrl-2 = <&dcan1_pins_default>;
};
--- a/arch/arm/boot/dts/dra72-evm.dts
+++ b/arch/arm/boot/dts/dra72-evm.dts
@@ -497,9 +497,10 @@
&dcan1 {
status = "ok";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&dcan1_pins_default>;
+ pinctrl-names = "default", "sleep", "active";
+ pinctrl-0 = <&dcan1_pins_sleep>;
pinctrl-1 = <&dcan1_pins_sleep>;
+ pinctrl-2 = <&dcan1_pins_default>;
};
&qspi {
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
