Hi Zhiqiang,
On 19 August 2015 at 17:42, Hou Zhiqiang <b48...@freescale.com> wrote:
> Hi Jagan,
>
>> -----Original Message-----
>> From: Jagan Teki [mailto:jt...@openedev.com]
>> Sent: 2015年8月19日 17:57
>> To: linux-...@lists.infradead.org
>> Cc: linux-kernel@vger.kernel.org; Jagan Teki; Hou Zhiqiang-B48286; Hu
>> Mingkai-B21284; David Woodhouse; Brian Norris
>> Subject: [PATCH 3/3] mtd: spi-nor: sf: Add clear flag status register
>> support
>>
>> The clear flag status register operation was required by Micron SPI-NOR
>> chips, which support FSR. And if an error bit of FSR have been set like
>> protection, voltage, erase, and program, it must be cleared by the clear
>> FSR operation.
>>
>> Signed-off-by: Jagan Teki <jt...@openedev.com>
>> Cc: Hou Zhiqiang <b48...@freescale.com>
>> Cc: Mingkai.Hu <mingkai...@freescale.com>
>> Cc: David Woodhouse <dw...@infradead.org>
>> Cc: Brian Norris <computersforpe...@gmail.com>
>> ---
>> drivers/mtd/spi-nor/spi-nor.c | 35 +++++++++++++++++++++++++++++++----
>> include/linux/mtd/spi-nor.h | 9 +++++++++
>> 2 files changed, 40 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-
>> nor.c index f954d03..c5c472d5 100644
>> --- a/drivers/mtd/spi-nor/spi-nor.c
>> +++ b/drivers/mtd/spi-nor/spi-nor.c
>> @@ -100,6 +100,28 @@ static int read_fsr(struct spi_nor *nor) }
>>
>> /*
>> + * Read the clear flag status register.
>> + * The clear flag status register operation was required by Micron
>> + * SPI-NOR chips, which support FSR. And if an error bit of FSR
>> + * have been set like protection, voltage, erase, and program,
>> + * it must be cleared by the clear FSR operation.
>> + * Returns zero for FSR bits cleared and negative if error occurred.
>> + */
>> +static int read_cfsr(struct spi_nor *nor) {
>> + int ret;
>> + u8 val;
>> +
>> + ret = nor->read_reg(nor, SPINOR_OP_RDCFSR, &val, 1);
>
> There should be a write_reg instead of read_reg.
> There isn’t a register named CFSR, and the command SPINOR_OP_RDCFSR
> is used to clear the FSR, another words reset FSR to default value.
Yes, SPINOR_OP_RDCFSR is clear flag status register, for clearing errors bits
on fsr we need to read cfsr once.
>
>> + if (ret < 0) {
>> + pr_err("error %d reading CFSR\n", ret);
>> + return ret;
>> + }
>> +
>> + return val;
>> +}
>> +
>> +/*
>> * Read configuration register, returning its value in the
>> * location. Return the configuration register value.
>> * Returns negative if error occured.
>> @@ -209,10 +231,15 @@ static inline int spi_nor_sr_ready(struct spi_nor
>> *nor) static inline int spi_nor_fsr_ready(struct spi_nor *nor) {
>> int fsr = read_fsr(nor);
>> - if (fsr < 0)
>> - return fsr;
>> - else
>> - return fsr & FSR_READY;
>> + if (fsr & FSR_ERR_MASK) {
>> + pr_err("flag status(0x%x) error occured\n", fsr);
>> + int cfsr = read_cfsr(nor);
>> + if (cfsr < 0)
>> + return cfsr;
>> + return -1;
>> + }
>> +
>> + return fsr & FSR_READY;
>> }
>>
>> static int spi_nor_ready(struct spi_nor *nor) diff --git
>> a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h index
>> c5a58c4..36c1681 100644
>> --- a/include/linux/mtd/spi-nor.h
>> +++ b/include/linux/mtd/spi-nor.h
>> @@ -35,6 +35,7 @@
>> #define SPINOR_OP_RDID 0x9f /* Read JEDEC ID */
>> #define SPINOR_OP_RDCR 0x35 /* Read configuration register
>> */
>> #define SPINOR_OP_RDFSR 0x70 /* Read flag status register */
>> +#define SPINOR_OP_RDCFSR 0x50 /* Read clear flag status register */
>>
>> /* 4-byte address opcodes - used on Spansion and some Macronix flashes.
>> */
>> #define SPINOR_OP_READ4 0x13 /* Read data bytes (low
>> frequency) */
>> @@ -74,6 +75,14 @@
>> /* Enhanced Volatile Configuration Register bits */
>> #define EVCR_QUAD_EN_MICRON 0x80 /* Micron Quad I/O */
>>
>> +/* Flag Status Register Error bits */
>> +#define FSR_ERR_PROT 0x2 /* Protection */
>> +#define FSR_ERR_VOLT 0x8 /* Voltage on Vpp */
>> +#define FSR_ERR_PROG 0x10 /* Program operation */
>> +#define FSR_ERR_ERASE 0x20 /* Erase operation */
>> +#define FSR_ERR_MASK (FSR_ERR_PROT | FSR_ERR_VOLT | \
>> + FSR_ERR_PROG | FSR_ERR_ERASE)
>> +
>> /* Flag Status Register bits */
>> #define FSR_READY 0x80
thanks!
--
Jagan | openedev.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
