* Huang Rui <ray.hu...@amd.com> wrote:

> This patch adds a member in fam15h_power_data which specifies the
> compute unit accumulated power.
> 
> Signed-off-by: Huang Rui <ray.hu...@amd.com>
> ---
>  drivers/hwmon/fam15h_power.c | 31 +++++++++++++++++++++++++++----
>  1 file changed, 27 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/hwmon/fam15h_power.c b/drivers/hwmon/fam15h_power.c
> index fdfa18e..f5ff48f 100644
> --- a/drivers/hwmon/fam15h_power.c
> +++ b/drivers/hwmon/fam15h_power.c
> @@ -43,7 +43,9 @@ MODULE_LICENSE("GPL");
>  #define REG_TDP_LIMIT3                       0xe8
>  
>  #define FAM15H_MIN_POWER_GROUPS              2
> +#define MAX_CUS                              8
>  
> +#define MSR_F15H_CU_PWR_ACCUMULATOR  0xc001007a
>  #define MSR_F15H_CU_MAX_PWR_ACCUMULATOR      0xc001007b
>  
>  struct fam15h_power_data {
> @@ -54,6 +56,8 @@ struct fam15h_power_data {
>       unsigned int cpu_pwr_sample_ratio;
>       /* maximum accumulated power of a compute unit */
>       u64 max_cu_acc_power;
> +     /* accumulated power of the compute units */
> +     u64 cu_acc_power[MAX_CUS];
>  };
>  
>  static ssize_t show_power(struct device *dev,
> @@ -207,6 +211,7 @@ static int fam15h_power_resume(struct pci_dev *pdev)
>  static int fam15h_power_init_data(struct pci_dev *f4,
>                                 struct fam15h_power_data *data)
>  {
> +     int cu_num, cores_per_cu, cpu, cu;
>       u32 val, eax, ebx, ecx, edx;
>       u64 tmp;
>  
> @@ -249,6 +254,21 @@ static int fam15h_power_init_data(struct pci_dev *f4,
>  
>       data->max_cu_acc_power = tmp;
>  
> +     cores_per_cu = amd_get_cores_per_cu();
> +     cu_num = boot_cpu_data.x86_max_cores / cores_per_cu;
> +
> +     WARN_ON_ONCE(cu_num > MAX_CUS);
> +
> +     for (cpu = 0; cpu < cu_num * cores_per_cu; cpu += cores_per_cu) {

so 'cu_num * cores_per_cu' is really a roundabout way to say 
boot_cpu_data.x86_max_cores?

> +             cu = cpu / cores_per_cu;
> +             if (rdmsrl_safe_on_cpu(cpu, MSR_F15H_CU_PWR_ACCUMULATOR,
> +                                    &data->cu_acc_power[cu])) {
> +                     pr_err("Failed to read compute unit power accumulator 
> MSR on core%d\n",
> +                            cpu);

Please don't break printk lines mid-line - ignore checkpatch in this case.

Also, the message talks about 'core', while a CPU ID is printed.

Thanks,

        Ingo
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to