On 08.09.2015 18:38, Robert Baldyga wrote:
> This patch fixes UART status handling in DMA mode.
Please describe the issue - what kind of issues are in UART status
handling? I think this fixes a specific bug which can be observed by the
user, so it should be mentioned here. You mention this a little bit
later but I would miss it if I were not aware earlier of the issue.
> For this purpose we
> introduce s3c24xx_serial_rx_drain_fifo() function, which contains common
> RX handling code for both PIO mode and DMA mode (in case of interrupt).
>
> Thanks to this we have, among others, 'break' condition handling needed
> for Magic SysRq, which was missing in DMA mode so far. Since we can use
> UART in DMA mode as serial console, it's quite important improvement.
>
> This change additionally simplifies RX handling code, as we no longer
> need uart_rx_drain_fifo() function, so we can remove it.
Maybe it's because I don't know the driver but I have difficulties to
spot the exact fix. There is significant code movement... To spot the
difference I even applied the patch, it helped...
I think it could be split for easier understanding. First introduce
common code (s3c24xx_serial_rx_drain_fifo()) and then fix the issue.
Yeah, I am grumpy but really the fix should be made visible (easier to
spot).
Best regards,
Krzysztof
>
> Reported-by: Marek Szyprowski <m.szyprow...@samsung.com>
> Signed-off-by: Robert Baldyga <r.bald...@samsung.com>
> ---
> drivers/tty/serial/samsung.c | 142
> +++++++++++++++++++------------------------
> 1 file changed, 61 insertions(+), 81 deletions(-)
>
> diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
> index 2b05194..007bc5f 100644
> --- a/drivers/tty/serial/samsung.c
> +++ b/drivers/tty/serial/samsung.c
> @@ -388,29 +388,6 @@ static void s3c24xx_uart_copy_rx_to_tty(struct
> s3c24xx_uart_port *ourport,
> static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport,
> unsigned long ufstat);
>
> -static void uart_rx_drain_fifo(struct s3c24xx_uart_port *ourport)
> -{
> - struct uart_port *port = &ourport->port;
> - struct tty_port *tty = &port->state->port;
> - unsigned int ch, ufstat;
> - unsigned int count;
> -
> - ufstat = rd_regl(port, S3C2410_UFSTAT);
> - count = s3c24xx_serial_rx_fifocnt(ourport, ufstat);
> -
> - if (!count)
> - return;
> -
> - while (count-- > 0) {
> - ch = rd_regb(port, S3C2410_URXH);
> -
> - ourport->port.icount.rx++;
> - tty_insert_flip_char(tty, ch, TTY_NORMAL);
> - }
> -
> - tty_flip_buffer_push(tty);
> -}
> -
> static void s3c24xx_serial_stop_rx(struct uart_port *port)
> {
> struct s3c24xx_uart_port *ourport = to_ourport(port);
> @@ -573,64 +550,12 @@ static void enable_rx_pio(struct s3c24xx_uart_port
> *ourport)
> ourport->rx_mode = S3C24XX_RX_PIO;
> }
>
> -static irqreturn_t s3c24xx_serial_rx_chars_dma(void *dev_id)
> +static void s3c24xx_serial_rx_drain_fifo(struct s3c24xx_uart_port *ourport)
> {
> - unsigned int utrstat, ufstat, received;
> - struct s3c24xx_uart_port *ourport = dev_id;
> - struct uart_port *port = &ourport->port;
> - struct s3c24xx_uart_dma *dma = ourport->dma;
> - struct tty_struct *tty = tty_port_tty_get(&ourport->port.state->port);
> - struct tty_port *t = &port->state->port;
> - unsigned long flags;
> - struct dma_tx_state state;
> -
> - utrstat = rd_regl(port, S3C2410_UTRSTAT);
> - ufstat = rd_regl(port, S3C2410_UFSTAT);
> -
> - spin_lock_irqsave(&port->lock, flags);
> -
> - if (!(utrstat & S3C2410_UTRSTAT_TIMEOUT)) {
> - s3c64xx_start_rx_dma(ourport);
> - if (ourport->rx_mode == S3C24XX_RX_PIO)
> - enable_rx_dma(ourport);
> - goto finish;
> - }
> -
> - if (ourport->rx_mode == S3C24XX_RX_DMA) {
> - dmaengine_pause(dma->rx_chan);
> - dmaengine_tx_status(dma->rx_chan, dma->rx_cookie, &state);
> - dmaengine_terminate_all(dma->rx_chan);
> - received = dma->rx_bytes_requested - state.residue;
> - s3c24xx_uart_copy_rx_to_tty(ourport, t, received);
> -
> - enable_rx_pio(ourport);
> - }
> -
> - uart_rx_drain_fifo(ourport);
> -
> - if (tty) {
> - tty_flip_buffer_push(t);
> - tty_kref_put(tty);
> - }
> -
> - wr_regl(port, S3C2410_UTRSTAT, S3C2410_UTRSTAT_TIMEOUT);
> -
> -finish:
> - spin_unlock_irqrestore(&port->lock, flags);
> -
> - return IRQ_HANDLED;
> -}
> -
> -static irqreturn_t s3c24xx_serial_rx_chars_pio(void *dev_id)
> -{
> - struct s3c24xx_uart_port *ourport = dev_id;
> struct uart_port *port = &ourport->port;
> unsigned int ufcon, ch, flag, ufstat, uerstat;
> - unsigned long flags;
> int max_count = port->fifosize;
>
> - spin_lock_irqsave(&port->lock, flags);
> -
> while (max_count-- > 0) {
> ufcon = rd_regl(port, S3C2410_UFCON);
> ufstat = rd_regl(port, S3C2410_UFSTAT);
> @@ -654,9 +579,7 @@ static irqreturn_t s3c24xx_serial_rx_chars_pio(void
> *dev_id)
> ufcon |= S3C2410_UFCON_RESETRX;
> wr_regl(port, S3C2410_UFCON, ufcon);
> rx_enabled(port) = 1;
> - spin_unlock_irqrestore(&port->lock,
> - flags);
> - goto out;
> + return;
> }
> continue;
> }
> @@ -702,10 +625,67 @@ static irqreturn_t s3c24xx_serial_rx_chars_pio(void
> *dev_id)
> ch, flag);
> }
>
> - spin_unlock_irqrestore(&port->lock, flags);
> tty_flip_buffer_push(&port->state->port);
> +}
> +
> +static irqreturn_t s3c24xx_serial_rx_chars_dma(void *dev_id)
> +{
> + unsigned int utrstat, ufstat, received;
> + struct s3c24xx_uart_port *ourport = dev_id;
> + struct uart_port *port = &ourport->port;
> + struct s3c24xx_uart_dma *dma = ourport->dma;
> + struct tty_struct *tty = tty_port_tty_get(&ourport->port.state->port);
> + struct tty_port *t = &port->state->port;
> + unsigned long flags;
> + struct dma_tx_state state;
> +
> + utrstat = rd_regl(port, S3C2410_UTRSTAT);
> + ufstat = rd_regl(port, S3C2410_UFSTAT);
> +
> + spin_lock_irqsave(&port->lock, flags);
> +
> + if (!(utrstat & S3C2410_UTRSTAT_TIMEOUT)) {
> + s3c64xx_start_rx_dma(ourport);
> + if (ourport->rx_mode == S3C24XX_RX_PIO)
> + enable_rx_dma(ourport);
> + goto finish;
> + }
> +
> + if (ourport->rx_mode == S3C24XX_RX_DMA) {
> + dmaengine_pause(dma->rx_chan);
> + dmaengine_tx_status(dma->rx_chan, dma->rx_cookie, &state);
> + dmaengine_terminate_all(dma->rx_chan);
> + received = dma->rx_bytes_requested - state.residue;
> + s3c24xx_uart_copy_rx_to_tty(ourport, t, received);
> +
> + enable_rx_pio(ourport);
> + }
> +
> + s3c24xx_serial_rx_drain_fifo(ourport);
> +
> + if (tty) {
> + tty_flip_buffer_push(t);
> + tty_kref_put(tty);
> + }
> +
> + wr_regl(port, S3C2410_UTRSTAT, S3C2410_UTRSTAT_TIMEOUT);
> +
> +finish:
> + spin_unlock_irqrestore(&port->lock, flags);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static irqreturn_t s3c24xx_serial_rx_chars_pio(void *dev_id)
> +{
> + struct s3c24xx_uart_port *ourport = dev_id;
> + struct uart_port *port = &ourport->port;
> + unsigned long flags;
> +
> + spin_lock_irqsave(&port->lock, flags);
> + s3c24xx_serial_rx_drain_fifo(ourport);
> + spin_unlock_irqrestore(&port->lock, flags);
>
> -out:
> return IRQ_HANDLED;
> }
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
