Hi, On Tuesday 15 September 2015 11:26 PM, Ray Jui wrote: > Add DT binding for Broadcom Cygnus PCIe PHYs
DT binding documentation. -Kishon > > Signed-off-by: Ray Jui <[email protected]> > Reviewed-by: Arun Parameswaran <[email protected]> > Reviewed-by: JD (Jiandong) Zheng <[email protected]> > Reviewed-by: Scott Branden <[email protected]> > --- > .../bindings/phy/brcm,cygnus-pcie-phy.txt | 30 > ++++++++++++++++++++++ > 1 file changed, 30 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt > > diff --git a/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt > b/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt > new file mode 100644 > index 0000000..ba41143 > --- /dev/null > +++ b/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt > @@ -0,0 +1,30 @@ > +Broadcom Cygnus PCIe PHY > + > +Required properties: > +- compatible: Must be "brcm,cygnus-pcie-phy" > +- reg: base address and length of the PCIe PHY block > +- #phy-cells: must be <1> > +The first cell is the PHY ID: > +0 - PCIe RC 0 > +1 - PCIe RC 1 > + > +Example: > + pcie_phy: phy@0301d0a0 { > + compatible = "brcm,cygnus-pcie-phy"; > + reg = <0x0301d0a0 0x14>; > + #phy-cells = <1>; > + }; > + > + pcie0: pcie@18012000 { > + ... > + ... > + phys = <&pcie_phy 0>; > + phy-names = "pcie-phy"; > + }; > + > + pcie1: pcie@18013000 { > + ... > + ... > + phys = <&pcie_phy 1>; > + phy-names = "pcie-phy"; > + }; > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
