On 05/10/15 13:11, Lee Jones wrote:
On Mon, 05 Oct 2015, Daniel Thompson wrote:
Late but...
That's okay. Fixup patches can always be submitted.
We have forever. :)
On 17/09/15 14:45, Lee Jones wrote:
diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile
index 055bb01..8bcfb45 100644
--- a/drivers/char/hw_random/Makefile
+++ b/drivers/char/hw_random/Makefile
@@ -30,4 +30,5 @@ obj-$(CONFIG_HW_RANDOM_TPM) += tpm-rng.o
obj-$(CONFIG_HW_RANDOM_BCM2835) += bcm2835-rng.o
obj-$(CONFIG_HW_RANDOM_IPROC_RNG200) += iproc-rng200.o
obj-$(CONFIG_HW_RANDOM_MSM) += msm-rng.o
+obj-$(CONFIG_HW_RANDOM_ST) += st-rng.o
obj-$(CONFIG_HW_RANDOM_XGENE) += xgene-rng.o
diff --git a/drivers/char/hw_random/st-rng.c b/drivers/char/hw_random/st-rng.c
new file mode 100644
index 0000000..8c8a435
--- /dev/null
+++ b/drivers/char/hw_random/st-rng.c
@@ -0,0 +1,144 @@
+/*
+ * ST Random Number Generator Driver ST's Platforms
+ *
+ * Author: Pankaj Dev: <pankaj....@st.com>
+ * Lee Jones <lee.jo...@linaro.org>
+ *
+ * Copyright (C) 2015 STMicroelectronics (R&D) Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/hw_random.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+/* Registers */
+#define ST_RNG_STATUS_REG 0x20
+#define ST_RNG_DATA_REG 0x24
+
+/* Registers fields */
+#define ST_RNG_STATUS_BAD_SEQUENCE BIT(0)
+#define ST_RNG_STATUS_BAD_ALTERNANCE BIT(1)
+#define ST_RNG_STATUS_FIFO_FULL BIT(5)
+
+#define ST_RNG_FIFO_SIZE 8
+#define ST_RNG_SAMPLE_SIZE 2 /* 2 Byte (16bit) samples */
+
+/* Samples are available every 0.667us, which we round to 1us */
+#define ST_RNG_FILL_FIFO_TIMEOUT (1 * (ST_RNG_FIFO_SIZE /
ST_RNG_SAMPLE_SIZE))
+
+struct st_rng_data {
+ void __iomem *base;
+ struct clk *clk;
+ struct hwrng ops;
+};
+
+static int st_rng_read(struct hwrng *rng, void *data, size_t max, bool wait)
+{
+ struct st_rng_data *ddata = (struct st_rng_data *)rng->priv;
+ u32 status;
+ int i;
+
+ if (max < sizeof(u16))
+ return -EINVAL;
+
+ /* Wait until FIFO is full - max 4uS*/
+ for (i = 0; i < ST_RNG_FILL_FIFO_TIMEOUT; i++) {
+ status = readl_relaxed(ddata->base + ST_RNG_STATUS_REG);
+ if (status & ST_RNG_STATUS_FIFO_FULL)
+ break;
+ udelay(1);
How much bandwidth does using udelay() cost? I think it could be
10% compared to a tighter polling loop.
Samples are only available every 0.7uS and we only do this for every
4. The maximum it could 'cost' is <1uS. Do we really want to fuss
over that tiny amount of time? It's an understandable point if we
were talking about milliseconds, but a single microsecond?
This code is called in a tight loop so we're not talking about a
*single* microsecond! We are are talking about about one microsecond in
every five[1] and yes, I think we should care about that.
It takes 2.67uS for the FIFO to come ready so with a polling interval of
1uS + loop overhead so I would fully expect on average to "waste" 0.5uS
each time st_rng_read() is called (in a tight loop).
[1]... point three recurring ;-)
+ }
+
+ if (i == ST_RNG_FILL_FIFO_TIMEOUT)
+ return 0;
Isn't a timeout an error condition?
Yes, which is why we're returning 0. In this context 0 == 'no data'.
This will be converted to -EAGAIN if the caller did not request
NONBLOCKING.
I took the view that hitting the timeout means the hardware is broken.
Is it likely that the next time we call it there will be data ready? If
it is should it be trusted?
Daniel.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
