Mauro,
Thanks for the speedy patch!
My system can at least boot now, but has issues loading the frontend.
Linux video capture interface: v2.00
cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
ACPI: PCI Interrupt 0000:05:08.0[A] -> Link [APC3] -> GSI 18 (level,
low) -> IRQ 18
cx88[0]: subsystem: d420:9022, board: TeVii S420 DVB-S
[card=73,autodetected], frontend(s): 1
cx88[0]: TV tuner type -1, Radio tuner type -1
cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
tuner' 2-0068: chip found @ 0xd0 (cx88[0])
cx88[0]/0: found at 0000:05:08.0, rev: 5, irq: 18, latency: 32, mmio:
0xd8000000
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
tuner' 2-0068: tuner type not set
cx88[0]/2: cx2388x 8802 Driver Manager
ACPI: PCI Interrupt 0000:05:08.2[A] -> Link [APC3] -> GSI 18 (level,
low) -> IRQ 18
cx88[0]/2: found at 0000:05:08.2, rev: 5, irq: 18, latency: 32, mmio:
0xd9000000
ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level,
low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:04.0 to 64
cx88/2: cx2388x dvb driver version 0.0.6 loaded
cx88/2: registering cx8802 driver, type: dvb access: shared
cx88[0]/2: subsystem: d420:9022, board: TeVii S420 DVB-S [card=73]
cx88[0]/2: cx2388x based DVB/ATSC card
cx8802_alloc_frontends() allocating 1 frontend(s)
DVB: Unable to find symbol stv0299_attach()
DVB: Unable to find symbol stv0288_attach()
cx88[0]/2: frontend initialization failed
cx88[0]/2: dvb_register failed (err = -22)
cx88[0]/2: cx8802 probe failed, err = -22
thanks
Aaron
On 16/01/2009 2:55 AM, Mauro Carvalho Chehab wrote:
On Thu, 15 Jan 2009 11:25:38 +0000
"Alec Christie" <alec.chris...@gmail.com> wrote:
I am getting the same with the Haupauge HVR-4000 after a recent Kernel
Upgrade in Ubuntu Hardy (8.04).
Any help greatly appreciated.
Alec Christie
2009/1/15 Aaron Theodore <aa...@bat.id.au>
Hi I'm running Debian with kernel: 2.6.24-etchnhalf.1-686
I recently baught a TeVii S420 DVB-S card and have been tring to get it to work.
Firstly i built the v4l from: http://linuxtv.org/hg/v4l-dvb (hg clone) as the
card was not detected.
On first reboot after new modules are installed i get a kernel soft lockup....
cx88[0]/2: cx2388x based DVB/ATSC card
BUG: soft lockup - CPU#0 stuck for 11s! [modprobe:1767]
I just merged on http://linuxtv.org/hg/v4l-dvb a patch for fixing this bug.
Please test.
Cheers,
Mauro
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
