On 05/10/17 10:45, Sean Young wrote:
> This introduces a new lirc mode: scancode. Any device which can send raw IR
> can now also send scancodes.
>
> int main()
> {
> int mode, fd = open("/dev/lirc0", O_RDWR);
>
> mode = LIRC_MODE_SCANCODE;
> if (ioctl(fd, LIRC_SET_SEND_MODE, &mode)) {
> // kernel too old or lirc does not support transmit
> }
> struct lirc_scancode scancode = {
> .scancode = 0x1e3d,
> .rc_proto = RC_PROTO_RC5,
> };
> write(fd, &scancode, sizeof(scancode));
> close(fd);
> }
>
> The other fields of lirc_scancode must be set to 0.
>
> Note that toggle (rc5, rc6) and repeats (nec) are not implemented. Nor is
> there a method for holding down a key for a period.
>
> Signed-off-by: Sean Young <s...@mess.org>
> ---
> drivers/media/rc/ir-lirc-codec.c | 101
> ++++++++++++++++++++++++++++-----------
> drivers/media/rc/rc-core-priv.h | 2 +-
> include/media/rc-map.h | 54 +--------------------
> include/uapi/linux/lirc.h | 93 +++++++++++++++++++++++++++++++++++
> 4 files changed, 169 insertions(+), 81 deletions(-)
>
> diff --git a/drivers/media/rc/ir-lirc-codec.c
> b/drivers/media/rc/ir-lirc-codec.c
> index bd046c41a53a..ef0b8df88613 100644
> --- a/drivers/media/rc/ir-lirc-codec.c
> +++ b/drivers/media/rc/ir-lirc-codec.c
> @@ -107,7 +107,8 @@ static ssize_t ir_lirc_transmit_ir(struct file *file,
> const char __user *buf,
> {
> struct lirc_codec *lirc;
> struct rc_dev *dev;
> - unsigned int *txbuf; /* buffer with values to transmit */
> + unsigned int *txbuf = NULL;
> + struct ir_raw_event *raw = NULL;
> ssize_t ret = -EINVAL;
> size_t count;
> ktime_t start;
> @@ -121,16 +122,51 @@ static ssize_t ir_lirc_transmit_ir(struct file *file,
> const char __user *buf,
> if (!lirc)
> return -EFAULT;
>
> - if (n < sizeof(unsigned) || n % sizeof(unsigned))
> - return -EINVAL;
> + if (lirc->send_mode == LIRC_MODE_SCANCODE) {
> + struct lirc_scancode scan;
>
> - count = n / sizeof(unsigned);
> - if (count > LIRCBUF_SIZE || count % 2 == 0)
> - return -EINVAL;
> + if (n != sizeof(scan))
> + return -EINVAL;
>
> - txbuf = memdup_user(buf, n);
> - if (IS_ERR(txbuf))
> - return PTR_ERR(txbuf);
> + if (copy_from_user(&scan, buf, sizeof(scan)))
> + return -EFAULT;
> +
> + if (scan.flags || scan.source || scan.target || scan.unused ||
> + scan.timestamp)
> + return -EINVAL;
> +
> + raw = kmalloc_array(LIRCBUF_SIZE, sizeof(*raw), GFP_KERNEL);
> + if (!raw)
> + return -ENOMEM;
> +
> + ret = ir_raw_encode_scancode(scan.rc_proto, scan.scancode,
> + raw, LIRCBUF_SIZE);
> + if (ret < 0)
> + goto out;
> +
> + count = ret;
> +
> + txbuf = kmalloc_array(count, sizeof(unsigned int), GFP_KERNEL);
> + if (!txbuf) {
> + ret = -ENOMEM;
> + goto out;
> + }
> +
> + for (i = 0; i < count; i++)
> + /* Convert from NS to US */
> + txbuf[i] = DIV_ROUND_UP(raw[i].duration, 1000);
> + } else {
> + if (n < sizeof(unsigned int) || n % sizeof(unsigned int))
> + return -EINVAL;
> +
> + count = n / sizeof(unsigned int);
> + if (count > LIRCBUF_SIZE || count % 2 == 0)
> + return -EINVAL;
> +
> + txbuf = memdup_user(buf, n);
> + if (IS_ERR(txbuf))
> + return PTR_ERR(txbuf);
> + }
>
> dev = lirc->dev;
> if (!dev) {
> @@ -156,24 +192,31 @@ static ssize_t ir_lirc_transmit_ir(struct file *file,
> const char __user *buf,
> if (ret < 0)
> goto out;
>
> - for (duration = i = 0; i < ret; i++)
> - duration += txbuf[i];
> -
> - ret *= sizeof(unsigned int);
> -
> - /*
> - * The lircd gap calculation expects the write function to
> - * wait for the actual IR signal to be transmitted before
> - * returning.
> - */
> - towait = ktime_us_delta(ktime_add_us(start, duration), ktime_get());
> - if (towait > 0) {
> - set_current_state(TASK_INTERRUPTIBLE);
> - schedule_timeout(usecs_to_jiffies(towait));
> + if (lirc->send_mode == LIRC_MODE_SCANCODE) {
> + ret = n;
> + } else {
> + for (duration = i = 0; i < ret; i++)
> + duration += txbuf[i];
> +
> +
> + ret *= sizeof(unsigned int);
> +
> + /*
> + * The lircd gap calculation expects the write function to
> + * wait for the actual IR signal to be transmitted before
> + * returning.
> + */
> + towait = ktime_us_delta(ktime_add_us(start, duration),
> + ktime_get());
> + if (towait > 0) {
> + set_current_state(TASK_INTERRUPTIBLE);
> + schedule_timeout(usecs_to_jiffies(towait));
> + }
> }
>
> out:
> kfree(txbuf);
> + kfree(raw);
> return ret;
> }
>
> @@ -202,20 +245,22 @@ static long ir_lirc_ioctl(struct file *filep, unsigned
> int cmd,
>
> switch (cmd) {
>
> - /* legacy support */
> + /* mode support */
> case LIRC_GET_SEND_MODE:
> if (!dev->tx_ir)
> return -ENOTTY;
>
> - val = LIRC_MODE_PULSE;
> + val = lirc->send_mode;
> break;
>
> case LIRC_SET_SEND_MODE:
> if (!dev->tx_ir)
> return -ENOTTY;
>
> - if (val != LIRC_MODE_PULSE)
> + if (!(val == LIRC_MODE_PULSE || val == LIRC_MODE_SCANCODE))
> return -EINVAL;
> +
> + lirc->send_mode = val;
> return 0;
>
> /* TX settings */
> @@ -358,7 +403,7 @@ static int ir_lirc_register(struct rc_dev *dev)
> }
>
> if (dev->tx_ir) {
> - features |= LIRC_CAN_SEND_PULSE;
> + features |= LIRC_CAN_SEND_PULSE | LIRC_CAN_SEND_SCANCODE;
> if (dev->s_tx_mask)
> features |= LIRC_CAN_SET_TRANSMITTER_MASK;
> if (dev->s_tx_carrier)
> @@ -397,6 +442,8 @@ static int ir_lirc_register(struct rc_dev *dev)
> if (rc < 0)
> goto out;
>
> + dev->raw->lirc.send_mode = LIRC_MODE_PULSE;
> +
> dev->raw->lirc.ldev = ldev;
> dev->raw->lirc.dev = dev;
> return 0;
> diff --git a/drivers/media/rc/rc-core-priv.h b/drivers/media/rc/rc-core-priv.h
> index ae4dd0c27731..43eabea9f152 100644
> --- a/drivers/media/rc/rc-core-priv.h
> +++ b/drivers/media/rc/rc-core-priv.h
> @@ -113,7 +113,7 @@ struct ir_raw_event_ctrl {
> u64 gap_duration;
> bool gap;
> bool send_timeout_reports;
> -
> + u8 send_mode;
> } lirc;
> struct xmp_dec {
> int state;
> diff --git a/include/media/rc-map.h b/include/media/rc-map.h
> index 2a160e6e823c..00e033975eed 100644
> --- a/include/media/rc-map.h
> +++ b/include/media/rc-map.h
> @@ -10,59 +10,7 @@
> */
>
> #include <linux/input.h>
> -
> -/**
> - * enum rc_proto - the Remote Controller protocol
> - *
> - * @RC_PROTO_UNKNOWN: Protocol not known
> - * @RC_PROTO_OTHER: Protocol known but proprietary
> - * @RC_PROTO_RC5: Philips RC5 protocol
> - * @RC_PROTO_RC5X_20: Philips RC5x 20 bit protocol
> - * @RC_PROTO_RC5_SZ: StreamZap variant of RC5
> - * @RC_PROTO_JVC: JVC protocol
> - * @RC_PROTO_SONY12: Sony 12 bit protocol
> - * @RC_PROTO_SONY15: Sony 15 bit protocol
> - * @RC_PROTO_SONY20: Sony 20 bit protocol
> - * @RC_PROTO_NEC: NEC protocol
> - * @RC_PROTO_NECX: Extended NEC protocol
> - * @RC_PROTO_NEC32: NEC 32 bit protocol
> - * @RC_PROTO_SANYO: Sanyo protocol
> - * @RC_PROTO_MCIR2_KBD: RC6-ish MCE keyboard
> - * @RC_PROTO_MCIR2_MSE: RC6-ish MCE mouse
> - * @RC_PROTO_RC6_0: Philips RC6-0-16 protocol
> - * @RC_PROTO_RC6_6A_20: Philips RC6-6A-20 protocol
> - * @RC_PROTO_RC6_6A_24: Philips RC6-6A-24 protocol
> - * @RC_PROTO_RC6_6A_32: Philips RC6-6A-32 protocol
> - * @RC_PROTO_RC6_MCE: MCE (Philips RC6-6A-32 subtype) protocol
> - * @RC_PROTO_SHARP: Sharp protocol
> - * @RC_PROTO_XMP: XMP protocol
> - * @RC_PROTO_CEC: CEC protocol
> - */
> -enum rc_proto {
> - RC_PROTO_UNKNOWN = 0,
> - RC_PROTO_OTHER = 1,
> - RC_PROTO_RC5 = 2,
> - RC_PROTO_RC5X_20 = 3,
> - RC_PROTO_RC5_SZ = 4,
> - RC_PROTO_JVC = 5,
> - RC_PROTO_SONY12 = 6,
> - RC_PROTO_SONY15 = 7,
> - RC_PROTO_SONY20 = 8,
> - RC_PROTO_NEC = 9,
> - RC_PROTO_NECX = 10,
> - RC_PROTO_NEC32 = 11,
> - RC_PROTO_SANYO = 12,
> - RC_PROTO_MCIR2_KBD = 13,
> - RC_PROTO_MCIR2_MSE = 14,
> - RC_PROTO_RC6_0 = 15,
> - RC_PROTO_RC6_6A_20 = 16,
> - RC_PROTO_RC6_6A_24 = 17,
> - RC_PROTO_RC6_6A_32 = 18,
> - RC_PROTO_RC6_MCE = 19,
> - RC_PROTO_SHARP = 20,
> - RC_PROTO_XMP = 21,
> - RC_PROTO_CEC = 22,
> -};
> +#include <uapi/linux/lirc.h>
>
> #define RC_PROTO_BIT_NONE 0ULL
> #define RC_PROTO_BIT_UNKNOWN BIT_ULL(RC_PROTO_UNKNOWN)
> diff --git a/include/uapi/linux/lirc.h b/include/uapi/linux/lirc.h
> index 991ab4570b8e..312e37812783 100644
> --- a/include/uapi/linux/lirc.h
> +++ b/include/uapi/linux/lirc.h
> @@ -46,12 +46,14 @@
> #define LIRC_MODE_RAW 0x00000001
> #define LIRC_MODE_PULSE 0x00000002
> #define LIRC_MODE_MODE2 0x00000004
> +#define LIRC_MODE_SCANCODE 0x00000008
> #define LIRC_MODE_LIRCCODE 0x00000010
>
>
> #define LIRC_CAN_SEND_RAW LIRC_MODE2SEND(LIRC_MODE_RAW)
> #define LIRC_CAN_SEND_PULSE LIRC_MODE2SEND(LIRC_MODE_PULSE)
> #define LIRC_CAN_SEND_MODE2 LIRC_MODE2SEND(LIRC_MODE_MODE2)
> +#define LIRC_CAN_SEND_SCANCODE LIRC_MODE2SEND(LIRC_MODE_SCANCODE)
> #define LIRC_CAN_SEND_LIRCCODE LIRC_MODE2SEND(LIRC_MODE_LIRCCODE)
>
> #define LIRC_CAN_SEND_MASK 0x0000003f
> @@ -63,6 +65,7 @@
> #define LIRC_CAN_REC_RAW LIRC_MODE2REC(LIRC_MODE_RAW)
> #define LIRC_CAN_REC_PULSE LIRC_MODE2REC(LIRC_MODE_PULSE)
> #define LIRC_CAN_REC_MODE2 LIRC_MODE2REC(LIRC_MODE_MODE2)
> +#define LIRC_CAN_REC_SCANCODE LIRC_MODE2REC(LIRC_MODE_SCANCODE)
> #define LIRC_CAN_REC_LIRCCODE LIRC_MODE2REC(LIRC_MODE_LIRCCODE)
>
> #define LIRC_CAN_REC_MASK LIRC_MODE2REC(LIRC_CAN_SEND_MASK)
> @@ -130,4 +133,94 @@
>
> #define LIRC_SET_WIDEBAND_RECEIVER _IOW('i', 0x00000023, __u32)
>
> +/*
> + * For raw IR devices, both raw IR (LIRC_MODE_MODE2) and decodes scancodes
> + * (LIRC_MODE_SCANCODE) can be read. By default, poll will show read
> + * ready for the last mode set by LIRC_SET_REC_MODE. Use LIRC_SET_POLL_MODE
> + * LIRC_MODE_SCANCODE | LIRC_MODE_MODE2 to show read ready for both
> + * modes.
> + */
> +#define LIRC_SET_POLL_MODE _IOW('i', 0x00000024, __u32)
> +
> +/*
> + * struct lirc_scancode - decoded scancode with protocol for use with
> + * LIRC_MODE_SCANCODE
> + *
> + * @timestamp: Timestamp in nanoseconds using CLOCK_MONOTONIC when IR
> + * was decoded.
> + * @flags: should be 0 for transmit. When receiving scancodes,
> + * LIRC_SCANCODE_FLAG_TOGGLE or LIRC_SCANCODE_FLAG_REPEAT can be set
> + * depending on the protocol
> + * @target: target for transmit. Unused, set to 0.
> + * @source: source for receive. Unused, set to 0.
> + * @unused: set to 0.
> + * @rc_proto: see enum rc_proto
> + * @scancode: the scancode received or to be sent
> + */
> +struct lirc_scancode {
> + __u64 timestamp;
> + __u32 flags;
> + __u8 target;
> + __u8 source;
> + __u8 unused;
> + __u8 rc_proto;
> + __u64 scancode;
I'm thinking how this will be implemented using CEC. Some RC commands take
arguments
(up to 4 bytes for the 0x67 (Tune Function) code), so how will they be handled?
See CEC table 6 in the HDMI 1.4 spec.
Should they be part of the scancode, or would it be better to add a '__u8
args[8];'
field?
I've no idea what makes sense, it's a weird corner case.
> +};
> +
> +#define LIRC_SCANCODE_FLAG_TOGGLE 1
> +#define LIRC_SCANCODE_FLAG_REPEAT 2
These flags need documentation.
Regards,
Hans
> +
> +/**
> + * enum rc_proto - the Remote Controller protocol
> + *
> + * @RC_PROTO_UNKNOWN: Protocol not known
> + * @RC_PROTO_OTHER: Protocol known but proprietary
> + * @RC_PROTO_RC5: Philips RC5 protocol
> + * @RC_PROTO_RC5X_20: Philips RC5x 20 bit protocol
> + * @RC_PROTO_RC5_SZ: StreamZap variant of RC5
> + * @RC_PROTO_JVC: JVC protocol
> + * @RC_PROTO_SONY12: Sony 12 bit protocol
> + * @RC_PROTO_SONY15: Sony 15 bit protocol
> + * @RC_PROTO_SONY20: Sony 20 bit protocol
> + * @RC_PROTO_NEC: NEC protocol
> + * @RC_PROTO_NECX: Extended NEC protocol
> + * @RC_PROTO_NEC32: NEC 32 bit protocol
> + * @RC_PROTO_SANYO: Sanyo protocol
> + * @RC_PROTO_MCIR2_KBD: RC6-ish MCE keyboard
> + * @RC_PROTO_MCIR2_MSE: RC6-ish MCE mouse
> + * @RC_PROTO_RC6_0: Philips RC6-0-16 protocol
> + * @RC_PROTO_RC6_6A_20: Philips RC6-6A-20 protocol
> + * @RC_PROTO_RC6_6A_24: Philips RC6-6A-24 protocol
> + * @RC_PROTO_RC6_6A_32: Philips RC6-6A-32 protocol
> + * @RC_PROTO_RC6_MCE: MCE (Philips RC6-6A-32 subtype) protocol
> + * @RC_PROTO_SHARP: Sharp protocol
> + * @RC_PROTO_XMP: XMP protocol
> + * @RC_PROTO_CEC: CEC protocol
> + */
> +enum rc_proto {
> + RC_PROTO_UNKNOWN = 0,
> + RC_PROTO_OTHER = 1,
> + RC_PROTO_RC5 = 2,
> + RC_PROTO_RC5X_20 = 3,
> + RC_PROTO_RC5_SZ = 4,
> + RC_PROTO_JVC = 5,
> + RC_PROTO_SONY12 = 6,
> + RC_PROTO_SONY15 = 7,
> + RC_PROTO_SONY20 = 8,
> + RC_PROTO_NEC = 9,
> + RC_PROTO_NECX = 10,
> + RC_PROTO_NEC32 = 11,
> + RC_PROTO_SANYO = 12,
> + RC_PROTO_MCIR2_KBD = 13,
> + RC_PROTO_MCIR2_MSE = 14,
> + RC_PROTO_RC6_0 = 15,
> + RC_PROTO_RC6_6A_20 = 16,
> + RC_PROTO_RC6_6A_24 = 17,
> + RC_PROTO_RC6_6A_32 = 18,
> + RC_PROTO_RC6_MCE = 19,
> + RC_PROTO_SHARP = 20,
> + RC_PROTO_XMP = 21,
> + RC_PROTO_CEC = 22,
> +};
> +
> #endif
>
