From: Enrico Scholz <enrico.sch...@sigma-chemnitz.de>
The chip can be configured to output data transitions on the
rising or falling edge of PIXCLK (Datasheet R58:1[9]), default is on the
falling edge.
Parsing the fw-node is made in a subfunction to bundle all (future)
dt-parsing / fw-parsing stuff.
Signed-off-by: Enrico Scholz <enrico.sch...@sigma-chemnitz.de>
(m.grzesc...@pengutronix.de: Fix inverting clock. INV_PIX_CLOCK bit is set
per default. Set bit to 0 (enable mask bit without value) to enable
falling edge sampling.)
Signed-off-by: Michael Grzeschik <m.grzesc...@pengutronix.de>
(m.fel...@pengutronix.de: use fwnode helpers)
(m.fel...@pengutronix.de: mv of parsing into own function)
(m.fel...@pengutronix.de: adapt commit msg)
Signed-off-by: Marco Felsch <m.fel...@pengutronix.de>
Reviewed-by: Philipp Zabel <p.za...@pengutronix.de>
---
drivers/media/i2c/mt9m111.c | 52 ++++++++++++++++++++++++++++++++++++-
1 file changed, 51 insertions(+), 1 deletion(-)
diff --git a/drivers/media/i2c/mt9m111.c b/drivers/media/i2c/mt9m111.c
index 13080c6c1ba3..5d45bc9ea0cb 100644
--- a/drivers/media/i2c/mt9m111.c
+++ b/drivers/media/i2c/mt9m111.c
@@ -15,12 +15,14 @@
#include <linux/delay.h>
#include <linux/v4l2-mediabus.h>
#include <linux/module.h>
+#include <linux/of_graph.h>
#include <media/v4l2-async.h>
#include <media/v4l2-clk.h>
#include <media/v4l2-common.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-device.h>
+#include <media/v4l2-fwnode.h>
/*
* MT9M111, MT9M112 and MT9M131:
@@ -236,6 +238,8 @@ struct mt9m111 {
const struct mt9m111_datafmt *fmt;
int lastpage; /* PageMap cache value */
bool is_streaming;
+ /* user point of view - 0: falling 1: rising edge */
+ unsigned int pclk_sample:1;
#ifdef CONFIG_MEDIA_CONTROLLER
struct media_pad pad;
#endif
@@ -586,6 +590,10 @@ static int mt9m111_set_pixfmt(struct mt9m111 *mt9m111,
return -EINVAL;
}
+ /* receiver samples on falling edge, chip-hw default is rising */
+ if (mt9m111->pclk_sample == 0)
+ mask_outfmt2 |= MT9M111_OUTFMT_INV_PIX_CLOCK;
+
ret = mt9m111_reg_mask(client, context_a.output_fmt_ctrl2,
data_outfmt2, mask_outfmt2);
if (!ret)
@@ -1045,9 +1053,15 @@ static int mt9m111_s_stream(struct v4l2_subdev *sd, int
enable)
static int mt9m111_g_mbus_config(struct v4l2_subdev *sd,
struct v4l2_mbus_config *cfg)
{
- cfg->flags = V4L2_MBUS_MASTER | V4L2_MBUS_PCLK_SAMPLE_RISING |
+ struct mt9m111 *mt9m111 = container_of(sd, struct mt9m111, subdev);
+
+ cfg->flags = V4L2_MBUS_MASTER |
V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_HIGH |
V4L2_MBUS_DATA_ACTIVE_HIGH;
+
+ cfg->flags |= mt9m111->pclk_sample ? V4L2_MBUS_PCLK_SAMPLE_FALLING :
+ V4L2_MBUS_PCLK_SAMPLE_RISING;
+
cfg->type = V4L2_MBUS_PARALLEL;
return 0;
@@ -1117,6 +1131,33 @@ static int mt9m111_video_probe(struct i2c_client *client)
return ret;
}
+#ifdef CONFIG_OF
+static int mt9m111_probe_of(struct i2c_client *client, struct mt9m111 *mt9m111)
+{
+ struct v4l2_fwnode_endpoint *bus_cfg;
+ struct device_node *np;
+ int ret = 0;
+
+ np = of_graph_get_next_endpoint(client->dev.of_node, NULL);
+ if (!np)
+ return -EINVAL;
+
+ bus_cfg = v4l2_fwnode_endpoint_alloc_parse(of_fwnode_handle(np));
+ if (IS_ERR(bus_cfg)) {
+ ret = PTR_ERR(bus_cfg);
+ goto out_of_put;
+ }
+
+ mt9m111->pclk_sample = !!(bus_cfg->bus.parallel.flags &
+ V4L2_MBUS_PCLK_SAMPLE_RISING);
+
+ v4l2_fwnode_endpoint_free(bus_cfg);
+out_of_put:
+ of_node_put(np);
+ return ret;
+}
+#endif
+
static int mt9m111_probe(struct i2c_client *client,
const struct i2c_device_id *did)
{
@@ -1141,6 +1182,15 @@ static int mt9m111_probe(struct i2c_client *client,
/* Default HIGHPOWER context */
mt9m111->ctx = &context_b;
+ if (IS_ENABLED(CONFIG_OF)) {
+ ret = mt9m111_probe_of(client, mt9m111);
+ if (ret)
+ return ret;
+ } else {
+ /* use default chip hardware values */
+ mt9m111->pclk_sample = 1;
+ }
+
v4l2_i2c_subdev_init(&mt9m111->subdev, client, &mt9m111_subdev_ops);
mt9m111->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
--
2.19.0
