Hi Sakari,
On 18-10-20 00:24, Sakari Ailus wrote:
> Hi Marco,
>
> Thanks for the patchset.
>
> On Fri, Oct 19, 2018 at 05:50:27PM +0200, Marco Felsch wrote:
> > From: Enrico Scholz <enrico.sch...@sigma-chemnitz.de>
> >
> > The chip can be configured to output data transitions on the
> > rising or falling edge of PIXCLK (Datasheet R58:1[9]), default is on the
> > falling edge.
> >
> > Parsing the fw-node is made in a subfunction to bundle all (future)
> > dt-parsing / fw-parsing stuff.
>
> Could you rebase this on current mediatree master, please?
Of course.
> >
> > Signed-off-by: Enrico Scholz <enrico.sch...@sigma-chemnitz.de>
> > (m.grzesc...@pengutronix.de: Fix inverting clock. INV_PIX_CLOCK bit is set
> > per default. Set bit to 0 (enable mask bit without value) to enable
> > falling edge sampling.)
> > Signed-off-by: Michael Grzeschik <m.grzesc...@pengutronix.de>
> > (m.fel...@pengutronix.de: use fwnode helpers)
> > (m.fel...@pengutronix.de: mv of parsing into own function)
> > (m.fel...@pengutronix.de: adapt commit msg)
> > Signed-off-by: Marco Felsch <m.fel...@pengutronix.de>
> > Reviewed-by: Philipp Zabel <p.za...@pengutronix.de>
> > ---
> > drivers/media/i2c/mt9m111.c | 52 ++++++++++++++++++++++++++++++++++++-
> > 1 file changed, 51 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/media/i2c/mt9m111.c b/drivers/media/i2c/mt9m111.c
> > index 13080c6c1ba3..5d45bc9ea0cb 100644
> > --- a/drivers/media/i2c/mt9m111.c
> > +++ b/drivers/media/i2c/mt9m111.c
> > @@ -15,12 +15,14 @@
> > #include <linux/delay.h>
> > #include <linux/v4l2-mediabus.h>
> > #include <linux/module.h>
> > +#include <linux/of_graph.h>
> >
> > #include <media/v4l2-async.h>
> > #include <media/v4l2-clk.h>
> > #include <media/v4l2-common.h>
> > #include <media/v4l2-ctrls.h>
> > #include <media/v4l2-device.h>
> > +#include <media/v4l2-fwnode.h>
> >
> > /*
> > * MT9M111, MT9M112 and MT9M131:
> > @@ -236,6 +238,8 @@ struct mt9m111 {
> > const struct mt9m111_datafmt *fmt;
> > int lastpage; /* PageMap cache value */
> > bool is_streaming;
> > + /* user point of view - 0: falling 1: rising edge */
> > + unsigned int pclk_sample:1;
> > #ifdef CONFIG_MEDIA_CONTROLLER
> > struct media_pad pad;
> > #endif
> > @@ -586,6 +590,10 @@ static int mt9m111_set_pixfmt(struct mt9m111 *mt9m111,
> > return -EINVAL;
> > }
> >
> > + /* receiver samples on falling edge, chip-hw default is rising */
>
> Could you add DT binding documentation that would cover this? The existing
> documentation is, well, rather vague. Which properties are relevant for the
> hardware, are they mandatory or optional and if they're optional, then are
> there relevant default values?
Okay, I will ad a dt-binding patch.
Regards,
Marco
> > + if (mt9m111->pclk_sample == 0)
> > + mask_outfmt2 |= MT9M111_OUTFMT_INV_PIX_CLOCK;
> > +
> > ret = mt9m111_reg_mask(client, context_a.output_fmt_ctrl2,
> > data_outfmt2, mask_outfmt2);
> > if (!ret)
> > @@ -1045,9 +1053,15 @@ static int mt9m111_s_stream(struct v4l2_subdev *sd,
> > int enable)
> > static int mt9m111_g_mbus_config(struct v4l2_subdev *sd,
> > struct v4l2_mbus_config *cfg)
> > {
> > - cfg->flags = V4L2_MBUS_MASTER | V4L2_MBUS_PCLK_SAMPLE_RISING |
> > + struct mt9m111 *mt9m111 = container_of(sd, struct mt9m111, subdev);
> > +
> > + cfg->flags = V4L2_MBUS_MASTER |
> > V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_HIGH |
> > V4L2_MBUS_DATA_ACTIVE_HIGH;
> > +
> > + cfg->flags |= mt9m111->pclk_sample ? V4L2_MBUS_PCLK_SAMPLE_FALLING :
> > + V4L2_MBUS_PCLK_SAMPLE_RISING;
> > +
> > cfg->type = V4L2_MBUS_PARALLEL;
> >
> > return 0;
> > @@ -1117,6 +1131,33 @@ static int mt9m111_video_probe(struct i2c_client
> > *client)
> > return ret;
> > }
> >
> > +#ifdef CONFIG_OF
> > +static int mt9m111_probe_of(struct i2c_client *client, struct mt9m111
> > *mt9m111)
> > +{
> > + struct v4l2_fwnode_endpoint *bus_cfg;
> > + struct device_node *np;
> > + int ret = 0;
> > +
> > + np = of_graph_get_next_endpoint(client->dev.of_node, NULL);
> > + if (!np)
> > + return -EINVAL;
> > +
> > + bus_cfg = v4l2_fwnode_endpoint_alloc_parse(of_fwnode_handle(np));
> > + if (IS_ERR(bus_cfg)) {
> > + ret = PTR_ERR(bus_cfg);
> > + goto out_of_put;
> > + }
> > +
> > + mt9m111->pclk_sample = !!(bus_cfg->bus.parallel.flags &
> > + V4L2_MBUS_PCLK_SAMPLE_RISING);
> > +
> > + v4l2_fwnode_endpoint_free(bus_cfg);
> > +out_of_put:
> > + of_node_put(np);
> > + return ret;
> > +}
> > +#endif
> > +
> > static int mt9m111_probe(struct i2c_client *client,
> > const struct i2c_device_id *did)
> > {
> > @@ -1141,6 +1182,15 @@ static int mt9m111_probe(struct i2c_client *client,
> > /* Default HIGHPOWER context */
> > mt9m111->ctx = &context_b;
> >
> > + if (IS_ENABLED(CONFIG_OF)) {
> > + ret = mt9m111_probe_of(client, mt9m111);
> > + if (ret)
> > + return ret;
> > + } else {
> > + /* use default chip hardware values */
> > + mt9m111->pclk_sample = 1;
> > + }
> > +
> > v4l2_i2c_subdev_init(&mt9m111->subdev, client, &mt9m111_subdev_ops);
> > mt9m111->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> >
>
> --
> Regards,
>
> Sakari Ailus
> sakari.ai...@linux.intel.com
>
