On Sat, 16 Jan 2010 02:49:52 +0000, <[email protected]> wrote:
> Ah, I see. The whole thing is a tuner, and the label that I thought
said
> "ERIT" actually says "SERIT". Yes, it does have a label on it, I should
> have given you that up front. I had searched for it on the internet and
> decided that it didn't mean anything. Thanks so much for your help.
>
> The label reads SP1514LHb D0943B
>
> If I follow your decipher instructions that means:
>
> 1: DVB-S
> 5: 16cc
> 1: Unsure, but it has an LNB in and an LNB out, so I guess it does have
> loop through?
> 4: Si2109
> L: Si labs
> H: Horizontal
> b: Lead free
>
> So I'm looking for some code to enable an Si2109 tuner?
>
> Thanks again,
>
> Paul
I'm looking through the dm1105 code that I have in 2.6.33-rc4. I have a
block that reads:
dm1105dvb->fe = dvb_attach(
si21xx_attach, &serit_config,
&dm1105dvb->i2c_adap);
if (dm1105dvb->fe)
dm1105dvb->fe->ops.set_voltage =
dm1105dvb_set_voltage;
I have looked through the code for si21xx.c, and I see that you wrote that
as well. You have been very busy!!
I did rmmod si21xx, then insmod si21xx debug=1.
I then rmmod dm1105, insmod dm1105.
dmesg reports:
[191712.426735] dm1105 0000:06:00.0: PCI INT A -> GSI 20 (level, low) ->
IRQ 20
[191712.426898] DVB: registering new adapter (dm1105)
[191712.674945] dm1105 0000:06:00.0: MAC 00:00:00:00:00:00
[191714.072172] si21xx: si21xx_attach
[191714.320219] si21xx: si21_readreg: readreg error (reg == 0x01, ret ==
-1)
[191714.568266] si21xx: si21_writereg: writereg error (reg == 0x01, data
== 0x40, ret == -1)
[191715.020067] si21xx: si21_readreg: readreg error (reg == 0x00, ret ==
-1)
[191715.020125] dm1105 0000:06:00.0: could not attach frontend
[191715.020297] dm1105 0000:06:00.0: PCI INT A disabled
Does this shed any light on the matter for you?
Thanks,
Paul
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
