Igor wrote:
> Oh, that is wrong. It is registers addresses, Never touch this.
>
> Let's look on that part of code:
>
> /* GPIO's for LNB power control */
> #define DM1105_LNB_MASK 0x00000000 // later in
code write it to
> DM1105_GPIOCTR, all GPIO's as OUT
> #define DM1105_LNB_OFF 0x00020000 // later in
code write it to
> DM1105_GPIOVAL, set GPIO17 to HIGH
> But you have not to change this.
> Right way is to write another entry in cards structure and so on.
> Better leave it to me.
> Regards
> Igor
Thanks for all your help, I understand better now. I have moved to code
like that at the bottom. It still doesn't work, but feels a lot closer.
Before I keep playing with values, I want to check I'm on the right track.
Does it look right? Specific questions:
1. I see there is a hw_init function. Should I be using that? I put the
logic into fe_attach because there was already card-specific logic in
there. But this feels like hw initialisation.
2. Should I set the control to input or output? I'm assuming input = 1.
3. Would pin 15 be numbered from the left or right - is it 0x4, or 0x2000?
Thanks,
Paul
*** dm1105.c.old 2010-01-13 16:15:00.000000000 +1100
--- dm1105.c 2010-01-21 08:13:14.000000000 +1100
***************
*** 51,56 ****
--- 51,57 ----
#define DM1105_BOARD_DVBWORLD_2002 1
#define DM1105_BOARD_DVBWORLD_2004 2
#define DM1105_BOARD_AXESS_DM05 3
+ #define DM1105_BOARD_UNBRANDED 4
/* ----------------------------------------------- */
/*
***************
*** 171,176 ****
--- 172,181 ----
#define DM05_LNB_13V 0x00020000
#define DM05_LNB_18V 0x00030000
+ /* GPIO's for demod reset for unbranded 195d:1105 */
+ #define UNBRANDED_DEMOD_MASK 0x00008000
+ #define UNBRANDED_DEMOD_RESET 0x00008000
+
static unsigned int card[] = {[0 ... 3] = UNSET };
module_param_array(card, int, NULL, 0444);
MODULE_PARM_DESC(card, "card type");
***************
*** 206,211 ****
--- 211,219 ----
[DM1105_BOARD_AXESS_DM05] = {
.name = "Axess/EasyTv DM05",
},
+ [DM1105_BOARD_UNBRANDED] = {
+ .name = "Unbranded 195d:1105",
+ },
};
static const struct dm1105_subid dm1105_subids[] = {
***************
*** 229,234 ****
--- 237,246 ----
.subvendor = 0x195d,
.subdevice = 0x1105,
.card = DM1105_BOARD_AXESS_DM05,
+ }, {
+ .subvendor = 0x195d,
+ .subdevice = 0x1105,
+ .card = DM1105_BOARD_UNBRANDED,
},
};
***************
*** 698,703 ****
--- 710,727 ----
dm1105dvb->fe->ops.set_voltage =
dm1105dvb_set_voltage;
break;
+ case DM1105_BOARD_UNBRANDED:
+ printk(KERN_ERR "Attaching as board_unbranded\n");
+ outl(UNBRANDED_DEMOD_MASK, dm_io_mem(DM1105_GPIOCTR));
+ outl(UNBRANDED_DEMOD_RESET , dm_io_mem(DM1105_GPIOVAL));
+ dm1105dvb->fe = dvb_attach(
+ si21xx_attach, &serit_config,
+ &dm1105dvb->i2c_adap);
+ if (dm1105dvb->fe)
+ dm1105dvb->fe->ops.set_voltage =
+ dm1105dvb_set_voltage;
+
+ break;
case DM1105_BOARD_DVBWORLD_2002:
case DM1105_BOARD_AXESS_DM05:
default:
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
