Am 02.02.2010 21:03, schrieb Mauro Carvalho Chehab:
>
>>> Those tuner callback initializations are board-specific. So, it is better
>>> to test
>>> for your board model, if you need something different than what's currently
>>> done.
>>>
>>>
>>>
>> This tuner reset works with my stick, but I think that can test with
>> other tm6000 based sticks and if it not works then I can say this as a
>> board-specific.
>>
> It won't work on my boards. The GPIO pin used by each board is different.
>
>
Have you the right gpio pin in the card struct. I have the
".gpio_addr_tun_reset" the correct gpio pin
[TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE] = {
+ .name = "Terratec Cinergy Hybrid XE",
+ .tuner_type = TUNER_XC2028, /* has a XC3028 */
+ .tuner_addr = 0xc2 >> 1,
+ .demod_addr = 0x1e >> 1,
+ .type = TM6010,
+ .caps = {
+ .has_tuner = 1,
+ .has_dvb = 1,
+ .has_zl10353 = 1,
+ .has_eeprom = 1,
+ .has_remote = 1,
+ },
+ .gpio_addr_tun_reset = TM6010_GPIO_2, /* here */
+ }
};
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
