Stefan Ringel wrote: > Am 02.02.2010 21:03, schrieb Mauro Carvalho Chehab: >>>> Those tuner callback initializations are board-specific. So, it is better >>>> to test >>>> for your board model, if you need something different than what's >>>> currently done. >>>> >>>> >>>> >>> This tuner reset works with my stick, but I think that can test with >>> other tm6000 based sticks and if it not works then I can say this as a >>> board-specific. >>> >> It won't work on my boards. The GPIO pin used by each board is different. >> >> > Have you the right gpio pin in the card struct. I have the > ".gpio_addr_tun_reset" the correct gpio pin > > [TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE] = { > + .name = "Terratec Cinergy Hybrid XE", > + .tuner_type = TUNER_XC2028, /* has a XC3028 */ > + .tuner_addr = 0xc2 >> 1, > + .demod_addr = 0x1e >> 1, > + .type = TM6010, > + .caps = { > + .has_tuner = 1, > + .has_dvb = 1, > + .has_zl10353 = 1, > + .has_eeprom = 1, > + .has_remote = 1, > + }, > + .gpio_addr_tun_reset = TM6010_GPIO_2, /* here */ > + } > }; >
Ok, this works :) All needed pins should be customized there, either individually or via an struct similar to the one done at em28xx driver. Both ways have advantages and disadvantages. -- Cheers, Mauro -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html