Dan Carpenter wrote: > This was my patch: "cx25821: fix double unlock in medusa_video_init()" > > It accidentally got merged two times. The version from the staging tree > is not correct. Please can you revert it: > 7a02f549fcc30fe6be0c0024beae9a3db22e1af6 "Staging: cx25821: fix double > unlock in medusa_video_init()"
Hmm... true. > > I guess this is going through the V4L/DVB so it needs to be reverted > there as well as in the -staging tree. There's no need to touch at staging tree, since this change come from v4l-dvb tree. After reviewing the logic at the function, instead of just adding a patch to revert the wrong one, the better is to apply a different logic: add a goto that will always unlock and return the error. This simplifies the code a little bit, and, instead of just return -EINVAL, it will return the error condition reported by the called functions. Btw, cx25821-core currently doesn't handle the error returned by medusa_video_init(). Palash, Could you please add the proper validation code for the error conditions that may happen during device init? Cheers, Mauro -- V4L/DVB: cx25821: fix error condition logic at medusa_video_init() Signed-off-by: Mauro Carvalho Chehab <[email protected]> diff --git a/drivers/staging/cx25821/cx25821-medusa-video.c b/drivers/staging/cx25821/cx25821-medusa-video.c index 77ccef4..7545314 100644 --- a/drivers/staging/cx25821/cx25821-medusa-video.c +++ b/drivers/staging/cx25821/cx25821-medusa-video.c @@ -778,9 +778,9 @@ int medusa_set_saturation(struct cx25821_dev *dev, int saturation, int decoder) int medusa_video_init(struct cx25821_dev *dev) { - u32 value = 0, tmp = 0; - int ret_val = 0; - int i = 0; + u32 value, tmp = 0; + int ret_val; + int i; mutex_lock(&dev->lock); @@ -790,20 +790,15 @@ int medusa_video_init(struct cx25821_dev *dev) value = cx25821_i2c_read(&dev->i2c_bus[0], MON_A_CTRL, &tmp); value &= 0xFFFFF0FF; ret_val = cx25821_i2c_write(&dev->i2c_bus[0], MON_A_CTRL, value); + if (ret_val < 0) + goto error; - if (ret_val < 0) { - mutex_unlock(&dev->lock); - return -EINVAL; - } /* Turn off Master source switch enable */ value = cx25821_i2c_read(&dev->i2c_bus[0], MON_A_CTRL, &tmp); value &= 0xFFFFFFDF; ret_val = cx25821_i2c_write(&dev->i2c_bus[0], MON_A_CTRL, value); - - if (ret_val < 0) { - mutex_unlock(&dev->lock); - return -EINVAL; - } + if (ret_val < 0) + goto error; mutex_unlock(&dev->lock); @@ -817,31 +812,25 @@ int medusa_video_init(struct cx25821_dev *dev) value &= 0xFF70FF70; value |= 0x00090008; /* set en_active */ ret_val = cx25821_i2c_write(&dev->i2c_bus[0], DENC_AB_CTRL, value); + if (ret_val < 0) + goto error; - if (ret_val < 0) { - mutex_unlock(&dev->lock); - return -EINVAL; - } /* enable input is VIP/656 */ value = cx25821_i2c_read(&dev->i2c_bus[0], BYP_AB_CTRL, &tmp); value |= 0x00040100; /* enable VIP */ ret_val = cx25821_i2c_write(&dev->i2c_bus[0], BYP_AB_CTRL, value); - if (ret_val < 0) { - mutex_unlock(&dev->lock); - return -EINVAL; - } + if (ret_val < 0) + goto error; + /* select AFE clock to output mode */ value = cx25821_i2c_read(&dev->i2c_bus[0], AFE_AB_DIAG_CTRL, &tmp); value &= 0x83FFFFFF; - ret_val = - cx25821_i2c_write(&dev->i2c_bus[0], AFE_AB_DIAG_CTRL, - value | 0x10000000); + ret_val = cx25821_i2c_write(&dev->i2c_bus[0], AFE_AB_DIAG_CTRL, + value | 0x10000000); + if (ret_val < 0) + goto error; - if (ret_val < 0) { - mutex_unlock(&dev->lock); - return -EINVAL; - } /* Turn on all of the data out and control output pins. */ value = cx25821_i2c_read(&dev->i2c_bus[0], PIN_OE_CTRL, &tmp); value &= 0xFEF0FE00; @@ -868,9 +857,9 @@ int medusa_video_init(struct cx25821_dev *dev) mutex_unlock(&dev->lock); ret_val = medusa_set_videostandard(dev); + return ret_val; - if (ret_val < 0) - return -EINVAL; - - return 1; +error: + mutex_unlock(&dev->lock); + return ret_val; } -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
