Laurent and team,
I am using the OMAP3 ISP code from the devel branch on gitorious that I
back ported to a 2.6.31 kernel. Raw bayer streaming to the CCDC output
works fine. I am using parallel input with the bridge disabled in that mode.
I am having a problem when I switch the sensor to output YUV422 data.
The YUV422 stream is a 8x2. If I only switch the sensor to YUV422 mode,
then I can get the YUV422 data at the CCDC output, but the CCDC pads an
extra zero byte in there and I only get half the image. So that works as
expected. I was then hoping all I would have to do is enable the bridge
to get the YUV422_8x2 data packed into the YUV422_16x1 automatically,
but instead I get select timeouts.
My question:
- Are there other things I need to when I enable the parallel bridge?
For example, do I need to change a clock rate somewhere? From the TRM,
it seems like it should just work without any changes, but maybe I am
missing something.
Thanks,
Lane
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
