Hi Lane, On Tuesday 03 August 2010 17:26:48 Lane Brooks wrote: > Laurent and team,
Could you please CC me when sending a mail that requires my attention ? I follow the linux-media mailing list, but sometimes mails can slip by. > I am using the OMAP3 ISP code from the devel branch on gitorious that I > back ported to a 2.6.31 kernel. Raw bayer streaming to the CCDC output > works fine. I am using parallel input with the bridge disabled in that > mode. > > I am having a problem when I switch the sensor to output YUV422 data. > The YUV422 stream is a 8x2. If I only switch the sensor to YUV422 mode, > then I can get the YUV422 data at the CCDC output, but the CCDC pads an > extra zero byte in there and I only get half the image. So that works as > expected. I was then hoping all I would have to do is enable the bridge > to get the YUV422_8x2 data packed into the YUV422_16x1 automatically, > but instead I get select timeouts. > > My question: > > - Are there other things I need to when I enable the parallel bridge? > For example, do I need to change a clock rate somewhere? From the TRM, > it seems like it should just work without any changes, but maybe I am > missing something. Good question. ISP bridge and YUV modes support are not implemented in the driver, but you're probably already aware of that. I unfortunately have no straightforward answer. Try tracing the ISP interrupts and monitoring the CCDC SBL busy bits to see if the CCDC writes images to memory correctly. -- Regards, Laurent Pinchart -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html