On Fri, 2011-04-08 at 12:21 -0400, Jarod Wilson wrote: > On Apr 8, 2011, at 11:22 AM, Lawrence Rust wrote: > > > On Fri, 2011-04-08 at 10:41 -0400, Jarod Wilson wrote: > >> On Apr 8, 2011, at 8:50 AM, Lawrence Rust wrote: > >> > >>> This patch restores remote control input for cx2388x based boards on > >>> Linux kernels >= 2.6.38. > >>> > >>> After upgrading from Linux 2.6.37 to 2.6.38 I found that the remote > >>> control input of my Hauppauge Nova-S plus was no longer functioning. > >>> I posted a question on this newsgroup and Mauro Carvalho Chehab gave > >>> some helpful pointers as to the likely cause. > >>> > >>> Turns out that there are 2 problems: > >> ... > >>> 2. The RC5 decoder appends the system code to the scancode and passes > >>> the combination to rc_keydown(). Unfortunately, the combined value is > >>> then forwarded to input_event() which then fails to recognise a valid > >>> scancode and hence no input events are generated. > >> > >> Just to clarify on this one, you're missing a step. We get the scancode, > >> and its passed to rc_keydown. rc_keydown then looks for a match in the > >> loaded keytable, then passes the *keycode* that matches the scancode > >> along to input_event. If you fix the keytable to contain system and > >> command, everything should work just fine again. Throwing away data is > >> a no-no though -- take a look at recent changes to ir-kdb-i2c, which > >> actually just recently made it start *including* system. :) > > > > Don't shoot the messenger. > > Wasn't my intention. I was simply trying to explain why your "fix" > isn't correct. > > > > I'm just reporting what I had to do to fix a clumsy hack by someone 6 > > months ago who didn't test their changes. This patch _restores_ the > > operation of a subsystem broken by those changes > > > > Perhaps those responsible for commit > > 2997137be8eba5bf9c07a24d5fda1f4225f9ca7d: > > > > Signed-off-by: David Härdeman <da...@hardeman.nu> > > Acked-by: Jarod Wilson <ja...@redhat.com> > > Signed-off-by: Mauro Carvalho Chehab <mche...@redhat.com> > > > > should fix the keytable. In the meantime (next year) I'll be using this > > patch. > > The entire commit message: > > [media] ir-core: convert drivers/media/video/cx88 to ir-core > > This patch converts the cx88 driver (for sampling hw) to use the > decoders provided by ir-core instead of the separate ones provided > by ir-functions (and gets rid of those). > > The value for MO_DDS_IO had a comment saying it corresponded to > a 4kHz samplerate. That comment was unfortunately misleading. The > actual samplerate was something like 3250Hz. > > The current value has been derived by analyzing the elapsed time > between interrupts for different values (knowing that each interrupt > corresponds to 32 samples). > > Thanks to Mariusz Bialonczyk <ma...@skyboo.net> for testing my patches > (about one a day for two weeks!) on actual hardware. > > Please note the part about how it *was* tested. And this certainly > was not a "clumsy hack", I'd actually call it a fairly skilled bit > of code de-duplication by David. Anyway... > > The problem is that there isn't a "the keytable". There are many > many keytables. And a lot of different hardware. Testing all possible > combinations of hardware (both receiver side and remote side) is > next to impossible.
Hauppauge have the lion's share of the DVB card market so this mod should have been tested with a Haupauge RC, but clearly wasn't. It also clearly wasn't tested with a cx2388x card because the interrupt handler has an obvious overflow. > We do what we can. Its unfortunate that your > hardware regressed in functionality. It happens, but it *can* be > fixed. The fix you provided just wasn't correct. It is correct for 2.6.38, which is what was described. I haven't checked all the keymaps but a sample of 5 show that none include a system ID. > The correct fix is > trivially updating drivers/media/rc/keymaps/<insert-your-keymap-here>. So, cherrypick the Hauppauge keytable from 2.6.39 and apply it to 2.6.38 together with the 2nd part of this patch. It would be real nice if that was in 2.6.38.3 -- Lawrence -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
