Em 20-04-2011 11:30, Stefan Ringel escreveu: > Am 20.04.2011 14:38, schrieb Mauro Carvalho Chehab: >> Em 20-04-2011 05:19, Stefan Ringel escreveu: >>> Am 19.04.2011 23:22, schrieb Mauro Carvalho Chehab: >>>> Em 04-04-2011 17:18, [email protected] escreveu: >>>>> From: Stefan Ringel<[email protected]> >>>>> >>>>> add dtv78 parameter >>>> The dtv78 entry is a hack meant for card usage in Australia, that >>>> speeds up channel detection there. Again, it should be specified >>>> only when needed, and at per-board basis. >>> I have test and auto detect doesn't work right. That is also region >>> specific staff and it's better to set outside. In other words in Germany >>> it must set this param and in other country, which use only 7MHz or 8MHz it >>> doesn't set (i.e. Australia). >> xc3028 has a logic to detect and work on both Australia and Europe. >> If that logic is broken, we should fix it, not adding a manual >> parameter for it. >> > It positively a bug. When I use lower band (7MHz, load DTV7 SCODE) it doesn't > work, then I go in the high band (8MHz, load DTV78, DTV8 SCODE) and have > channels and can watch TV. If I go now in the lower band (7MHz, don't reload > SCODE) it works. This effect is for me a bug.
The fix for it should be at xc3028. Please propose a patch for it. Maybe we should add there a parameter for auto-detection, or to force it to use dtv78, if bandwith is > 6MHz. >>>>> Signed-off-by: Stefan Ringel<[email protected]> >>>>> --- >>>>> drivers/staging/tm6000/tm6000-cards.c | 11 +++++++++-- >>>>> 1 files changed, 9 insertions(+), 2 deletions(-) >>>>> >>>>> diff --git a/drivers/staging/tm6000/tm6000-cards.c >>>>> b/drivers/staging/tm6000/tm6000-cards.c >>>>> index eef58da..cf2e76c 100644 >>>>> --- a/drivers/staging/tm6000/tm6000-cards.c >>>>> +++ b/drivers/staging/tm6000/tm6000-cards.c >>>>> @@ -65,6 +65,9 @@ static unsigned int xc2028_mts; >>>>> module_param(xc2028_mts, int, 0644); >>>>> MODULE_PARM_DESC(xc2028_mts, "enable mts firmware (xc2028/3028 only)"); >>>>> >>>>> +static unsigned int xc2028_dtv78; >>>>> +module_param(xc2028_dtv78, int, 0644); >>>>> +MODULE_PARM_DESC(xc2028_dtv78, "enable dualband config (xc2028/3028 >>>>> only)"); >>>>> >>>>> struct tm6000_board { >>>>> char *name; >>>>> @@ -687,8 +690,12 @@ static void tm6000_config_tuner(struct tm6000_core >>>>> *dev) >>>>> ctl.read_not_reliable = 0; >>>>> ctl.msleep = 10; >>>>> ctl.demod = XC3028_FE_ZARLINK456; >>>>> - ctl.vhfbw7 = 1; >>>>> - ctl.uhfbw8 = 1; >>>>> + >>>>> + if (xc2028_dtv78) { >>>>> + ctl.vhfbw7 = 1; >>>>> + ctl.uhfbw8 = 1; >>>>> + } >>>>> + >>>>> if (xc2028_mts) >>>>> ctl.mts = 1; >>>>> >>>> -- >>>> To unsubscribe from this list: send the line "unsubscribe linux-media" in >>>> the body of a message to [email protected] >>>> More majordomo info at http://vger.kernel.org/majordomo-info.html > > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to [email protected] > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
