Hi Kalle,
Thanks for the patch.
On Tuesday 03 May 2011 12:41:23 Kalle Jokiniemi wrote:
> The RX-51 uses the CSIb IO complex for camera operation. The
> board file is missing definition for the regulator supplying
> the CSIb complex, so this is added for better power
> management.
>
> Signed-off-by: Kalle Jokiniemi <kalle.jokini...@nokia.com>
> ---
> arch/arm/mach-omap2/board-rx51-peripherals.c | 6 ++++++
> 1 files changed, 6 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c
> b/arch/arm/mach-omap2/board-rx51-peripherals.c index bbcb677..2f12425
> 100644
> --- a/arch/arm/mach-omap2/board-rx51-peripherals.c
> +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
> @@ -337,6 +337,10 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
> static struct regulator_consumer_supply rx51_vmmc1_supply =
> REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0");
>
> +static struct regulator_consumer_supply rx51_vaux2_supply[] = {
> + REGULATOR_SUPPLY("vdds_csib", "omap3isp"),
> +};
> +
What about
static struct regulator_consumer_supply rx51_vaux2_supply =
REGULATOR_SUPPLY("vdds_csib", "omap3isp");
instead ? :-) It would be in line with the other vaux supply definitions.
> static struct regulator_consumer_supply rx51_vaux3_supply =
> REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1");
>
> @@ -400,6 +404,8 @@ static struct regulator_init_data rx51_vaux2 = {
> .valid_ops_mask = REGULATOR_CHANGE_MODE
>
> | REGULATOR_CHANGE_STATUS,
>
> },
> + .num_consumer_supplies = 1,
> + .consumer_supplies = rx51_vaux2_supply,
and
.consumer_supplies = &rx51_vaux2_supply,
here.
If you're fine with that, there's no need to resubmit, I'll modify this patch
and push the set through my tree (let me know if I can keep your SoB line with
that change).
> };
>
> /* VAUX3 - adds more power to VIO_18 rail */
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
