Dear linux-media list, I have recently bought a Hauppauge WinTV HVR-3300 and am trying to make it run with Linux.
Going by the output of lspci -v [1], I tried to go with the cx23885, which
doesn't recognize the card:
[24296.910574] cx23885 driver version 0.0.2 loaded
[24296.910612] cx23885 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[24296.910620] cx23885[0]: Your board isn't known (yet) to the driver.
[24296.910621] cx23885[0]: Try to pick one of the existing card configs via
[24296.910623] cx23885[0]: card=<n> insmod option. Updating to the latest
[24296.910625] cx23885[0]: version might help as well.
[...]
[24296.911165] CORE cx23885[0]: subsystem: 0070:53f1, board: UNKNOWN/GENERIC
[card=0,autodetected]
[24297.037221] cx23885_dev_checkrevision() Hardware revision = 0xd0
[24297.037228] cx23885[0]/0: found at 0000:01:00.0, rev: 4, irq: 16, latency:
0, mmio: 0xfe400000
[24297.037236] cx23885 0000:01:00.0: setting latency timer to 64
[24297.037304] cx23885 0000:01:00.0: irq 48 for MSI/MSI-X
Seems like some work is necessary to do here, which I'd be willing to do.
Can anyone suggest which might be the most similar card or what I should try
to write a driver for this?
Best regards, Steve
[1] Output of lspci -v
01:00.0 Multimedia video controller: Conexant Systems, Inc. CX23887/8 PCIe
Broadcast Audio and Video Decoder with 3D Comb (rev 04)
Subsystem: Hauppauge computer works Inc. Device 53f1
Flags: bus master, fast devsel, latency 0, IRQ 48
Memory at fe400000 (64-bit, non-prefetchable) [size=2M]
Capabilities: <access denied>
Kernel driver in use: cx23885
--
Steve Wolter ( Würzburg Univ.) | Web page: http://swolter.sdf1.org
| vCard: http://swolter.sdf1.org/swolter.vcf
A witty saying proves nothing. | Schedule: http://swolter.sdf1.org/sched.cgi
-- Voltaire (1694-1778) | E-mail: [email protected]
signature.asc
Description: Digital signature
