On Sat, Aug 6, 2011 at 10:44 AM, Steve Wolter <swol...@sdf.lonestar.org> wrote: > Dear linux-media list, > > I have recently bought a Hauppauge WinTV HVR-3300 and am trying to make > it run with Linux. > > Going by the output of lspci -v [1], I tried to go with the cx23885, which > doesn't recognize the card: > > [24296.910574] cx23885 driver version 0.0.2 loaded > [24296.910612] cx23885 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ > 16 > [24296.910620] cx23885[0]: Your board isn't known (yet) to the driver. > [24296.910621] cx23885[0]: Try to pick one of the existing card configs via > [24296.910623] cx23885[0]: card=<n> insmod option. Updating to the latest > [24296.910625] cx23885[0]: version might help as well. > [...] > [24296.911165] CORE cx23885[0]: subsystem: 0070:53f1, board: UNKNOWN/GENERIC > [card=0,autodetected] > [24297.037221] cx23885_dev_checkrevision() Hardware revision = 0xd0 > [24297.037228] cx23885[0]/0: found at 0000:01:00.0, rev: 4, irq: 16, latency: > 0, mmio: 0xfe400000 > [24297.037236] cx23885 0000:01:00.0: setting latency timer to 64 > [24297.037304] cx23885 0000:01:00.0: irq 48 for MSI/MSI-X > > Seems like some work is necessary to do here, which I'd be willing to do. > Can anyone suggest which might be the most similar card or what I should try > to write a driver for this?
Hi Steve, Like the 4400 and 5500, the 3300 uses both DVB-S and DVB-T demodulator chips for which there is currently no driver. Somebody would have to write those drivers from scratch in order for any of those products to be supported. In other words, it's not a case of just needing to add a few lines of code for another board profile. Cheers, Devin -- Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html