Em 31-08-2011 17:53, Mauro Carvalho Chehab escreveu:
> Em 04-08-2011 04:14, Thierry Reding escreveu:
>> When the last user closes the device, perform a lightweight reset of the
>> device to bring it into a well-known state.
>>
>> Note that this is not always enough with the TM6010, which sometimes
>> needs a hard reset to get into a working state again.
>> ---
>> drivers/staging/tm6000/tm6000-core.c | 43
>> +++++++++++++++++++++++++++++++++
>> drivers/staging/tm6000/tm6000-video.c | 8 +++++-
>> drivers/staging/tm6000/tm6000.h | 1 +
>> 3 files changed, 51 insertions(+), 1 deletions(-)
>>
>> diff --git a/drivers/staging/tm6000/tm6000-core.c
>> b/drivers/staging/tm6000/tm6000-core.c
>> index 317ab7e..58c1399 100644
>> --- a/drivers/staging/tm6000/tm6000-core.c
>> +++ b/drivers/staging/tm6000/tm6000-core.c
>> @@ -597,6 +597,49 @@ int tm6000_init(struct tm6000_core *dev)
>> return rc;
>> }
>>
>> +int tm6000_reset(struct tm6000_core *dev)
>> +{
>> + int pipe;
>> + int err;
>> +
>> + msleep(500);
>> +
>> + err = usb_set_interface(dev->udev, dev->isoc_in.bInterfaceNumber, 0);
>> + if (err < 0) {
>> + tm6000_err("failed to select interface %d, alt. setting 0\n",
>> + dev->isoc_in.bInterfaceNumber);
>> + return err;
>> + }
>> +
>> + err = usb_reset_configuration(dev->udev);
>> + if (err < 0) {
>> + tm6000_err("failed to reset configuration\n");
>> + return err;
>> + }
>> +
>> + msleep(5);
>> +
>> + err = usb_set_interface(dev->udev, dev->isoc_in.bInterfaceNumber, 2);
>> + if (err < 0) {
>> + tm6000_err("failed to select interface %d, alt. setting 2\n",
>> + dev->isoc_in.bInterfaceNumber);
>> + return err;
>> + }
>> +
>> + msleep(5);
>> +
>> + pipe = usb_rcvintpipe(dev->udev,
>> + dev->int_in.endp->desc.bEndpointAddress &
>> USB_ENDPOINT_NUMBER_MASK);
>> +
>> + err = usb_clear_halt(dev->udev, pipe);
>> + if (err < 0) {
>> + tm6000_err("usb_clear_halt failed: %d\n", err);
>> + return err;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> int tm6000_set_audio_bitrate(struct tm6000_core *dev, int bitrate)
>> {
>> int val = 0;
>> diff --git a/drivers/staging/tm6000/tm6000-video.c
>> b/drivers/staging/tm6000/tm6000-video.c
>> index 492ec73..70fc19e 100644
>> --- a/drivers/staging/tm6000/tm6000-video.c
>> +++ b/drivers/staging/tm6000/tm6000-video.c
>> @@ -1503,7 +1503,6 @@ static int tm6000_open(struct file *file)
>> tm6000_get_std_res(dev);
>>
>> file->private_data = fh;
>> - fh->vdev = vdev;
>> fh->dev = dev;
>> fh->radio = radio;
>> fh->type = type;
>> @@ -1606,9 +1605,16 @@ static int tm6000_release(struct file *file)
>> dev->users--;
>>
>> res_free(dev, fh);
>> +
>> if (!dev->users) {
>> + int err;
>> +
>> tm6000_uninit_isoc(dev);
>> videobuf_mmap_free(&fh->vb_vidq);
>> +
>> + err = tm6000_reset(dev);
>> + if (err < 0)
>> + dev_err(&vdev->dev, "reset failed: %d\n", err);
>> }
>>
>> kfree(fh);
>> diff --git a/drivers/staging/tm6000/tm6000.h
>> b/drivers/staging/tm6000/tm6000.h
>> index cf57e1e..dac2063 100644
>> --- a/drivers/staging/tm6000/tm6000.h
>> +++ b/drivers/staging/tm6000/tm6000.h
>> @@ -311,6 +311,7 @@ int tm6000_set_reg_mask(struct tm6000_core *dev, u8 req,
>> u16 value,
>> u16 index, u16 mask);
>> int tm6000_i2c_reset(struct tm6000_core *dev, u16 tsleep);
>> int tm6000_init(struct tm6000_core *dev);
>> +int tm6000_reset(struct tm6000_core *dev);
>>
>> int tm6000_init_analog_mode(struct tm6000_core *dev);
>> int tm6000_init_digital_mode(struct tm6000_core *dev);
>
> Something went wrong with the patchset. Got an OOPS during device probe.
> Maybe it were caused due to udev, that opens V4L devices, as soon as they're
> registered.
int tm6000_reset(struct tm6000_core *dev)
{
...
msleep(5);
pipe = usb_rcvintpipe(dev->udev,
dev->int_in.endp->desc.bEndpointAddress &
USB_ENDPOINT_NUMBER_MASK);
The bug is on the above line. It seems that usb_rcvintpipe() didn't like to be
called before the end of the device registration code.
>
>
> [34883.426065] tm6000 #0: registered device video0
> [34883.430591] Trident TVMaster TM5600/TM6000/TM6010 USB2 board (Load status:
> 0)
> [34883.437763] usbcore: registered new interface driver tm6000
> [34884.608372] BUG: unable to handle kernel NULL pointer dereference at
> 00000002
> [34884.615514] IP: [<f8c4ceea>] tm6000_reset+0xd7/0x11c [tm6000]
> [34884.621260] *pde = 00000000
> [34884.624139] Oops: 0000 [#1] SMP
> [34884.627375] Modules linked in: tuner_xc2028 tuner ir_lirc_codec lirc_dev
> ir_mce_kbd_decoder ir_sony_decoder ir_jvc_decoder ir_rc6_decoder
> ir_rc5_decoder tm6000 ir_nec_decoder videobuf_vmalloc videobuf_core rc_core
> v4l2_common videodev media tcp_lp fuse ebtable_nat ebtables ipt_MASQUERADE
> iptable_nat nf_nat xt_CHECKSUM iptable_mangle bridge stp llc bnep bluetooth
> sunrpc cpufreq_ondemand acpi_cpufreq mperf ip6t_REJECT nf_conntrack_ipv6
> nf_defrag_ipv6 ip6table_filter nf_conntrack_ipv4 ip6_tables nf_defrag_ipv4
> xt_state nf_conntrack snd_hda_codec_realtek snd_hda_intel snd_hda_codec
> snd_hwdep snd_seq snd_seq_device snd_pcm i7core_edac edac_core snd_timer tg3
> snd iTCO_wdt iTCO_vendor_support hp_wmi soundcore pcspkr snd_page_alloc
> floppy sparse_keymap rfkill serio_raw tpm_infineon microcode vboxnetadp
> vboxnetflt vboxdrv firewire_ohci firewire_core crc_itu_t nouveau ttm
> drm_kms_helper drm i2c_algo_bit i2c_core mxm_wmi wmi video [last unloaded:
> tuner_xc2028]
> [34884.712113]
> [34884.713599] Pid: 7448, comm: v4l_id Tainted: G W 3.0.0+ #1
> Hewlett-Packard HP Z400 Workstation/0AE4h
> [34884.723513] EIP: 0060:[<f8c4ceea>] EFLAGS: 00010246 CPU: 0
> [34884.728983] EIP is at tm6000_reset+0xd7/0x11c [tm6000]
> [34884.734104] EAX: f676c800 EBX: e38e5800 ECX: 00000000 EDX: 00000003
> [34884.740349] ESI: 00000000 EDI: efc3c400 EBP: efc19f18 ESP: efc19f04
> [34884.746594] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
> [34884.751974] Process v4l_id (pid: 7448, ti=efc18000 task=f6608000
> task.ti=efc18000)
> [34884.759517] Stack:
> [34884.761519] f2b51c00 efc19f18 f8be3f96 e38e5800 f2b51c00 efc19f44
> f8c4e6e5 f1b75a40
> [34884.769318] efc19f2c c0429397 efc19f34 c0810501 efc19f44 efc3c400
> eb4b8cc0 00000010
> [34884.777121] efc19f54 f8bb619d eb4b8cc0 f66ffe08 efc19f84 c04e9eaf
> 00000001 00000000
> [34884.784918] Call Trace:
> [34884.787360] [<f8be3f96>] ? __videobuf_free+0x10c/0x112 [videobuf_core]
> [34884.793958] [<f8c4e6e5>] tm6000_release+0xc7/0xf3 [tm6000]
> [34884.799513] [<c0429397>] ? should_resched+0xd/0x27
> [34884.804378] [<c0810501>] ? _cond_resched+0xd/0x21
> [34884.809158] [<f8bb619d>] v4l2_release+0x35/0x52 [videodev]
> [34884.814713] [<c04e9eaf>] fput+0x100/0x1a5
> [34884.818798] [<c04e75a1>] filp_close+0x5c/0x64
> [34884.823228] [<c04e7608>] sys_close+0x5f/0x93
> [34884.827571] [<c081745f>] sysenter_do_call+0x12/0x28
> [34884.832519] Code: 24 04 40 10 c5 f8 c7 04 24 56 1d c5 f8 89 44 24 08 eb 4b
> b8 05 00 00 00 e8 b2 a7 7f c7 8b 83 44 06 00 00 8b 8b 78 06 00 00 8b 10 <0f>
> b6 49 02 c1 e2 08 83 e1 0f 81 ca 80 00 00 40 c1 e1 0f 09 ca
> [34884.851965] EIP: [<f8c4ceea>] tm6000_reset+0xd7/0x11c [tm6000] SS:ESP
> 0068:efc19f04
> [34884.859623] CR2: 0000000000000002
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
