* Mauro Carvalho Chehab wrote:
> Em 31-08-2011 17:53, Mauro Carvalho Chehab escreveu:
> > Em 04-08-2011 04:14, Thierry Reding escreveu:
> >> When the last user closes the device, perform a lightweight reset of the
> >> device to bring it into a well-known state.
> >>
> >> Note that this is not always enough with the TM6010, which sometimes
> >> needs a hard reset to get into a working state again.
> >> ---
> >> drivers/staging/tm6000/tm6000-core.c | 43
> >> +++++++++++++++++++++++++++++++++
> >> drivers/staging/tm6000/tm6000-video.c | 8 +++++-
> >> drivers/staging/tm6000/tm6000.h | 1 +
> >> 3 files changed, 51 insertions(+), 1 deletions(-)
> >>
> >> diff --git a/drivers/staging/tm6000/tm6000-core.c
> >> b/drivers/staging/tm6000/tm6000-core.c
> >> index 317ab7e..58c1399 100644
> >> --- a/drivers/staging/tm6000/tm6000-core.c
> >> +++ b/drivers/staging/tm6000/tm6000-core.c
> >> @@ -597,6 +597,49 @@ int tm6000_init(struct tm6000_core *dev)
> >> return rc;
> >> }
> >>
> >> +int tm6000_reset(struct tm6000_core *dev)
> >> +{
> >> + int pipe;
> >> + int err;
> >> +
> >> + msleep(500);
> >> +
> >> + err = usb_set_interface(dev->udev, dev->isoc_in.bInterfaceNumber, 0);
> >> + if (err < 0) {
> >> + tm6000_err("failed to select interface %d, alt. setting 0\n",
> >> + dev->isoc_in.bInterfaceNumber);
> >> + return err;
> >> + }
> >> +
> >> + err = usb_reset_configuration(dev->udev);
> >> + if (err < 0) {
> >> + tm6000_err("failed to reset configuration\n");
> >> + return err;
> >> + }
> >> +
> >> + msleep(5);
> >> +
> >> + err = usb_set_interface(dev->udev, dev->isoc_in.bInterfaceNumber, 2);
> >> + if (err < 0) {
> >> + tm6000_err("failed to select interface %d, alt. setting 2\n",
> >> + dev->isoc_in.bInterfaceNumber);
> >> + return err;
> >> + }
> >> +
> >> + msleep(5);
> >> +
> >> + pipe = usb_rcvintpipe(dev->udev,
> >> + dev->int_in.endp->desc.bEndpointAddress &
> >> USB_ENDPOINT_NUMBER_MASK);
> >> +
> >> + err = usb_clear_halt(dev->udev, pipe);
> >> + if (err < 0) {
> >> + tm6000_err("usb_clear_halt failed: %d\n", err);
> >> + return err;
> >> + }
> >> +
> >> + return 0;
> >> +}
> >> +
> >> int tm6000_set_audio_bitrate(struct tm6000_core *dev, int bitrate)
> >> {
> >> int val = 0;
> >> diff --git a/drivers/staging/tm6000/tm6000-video.c
> >> b/drivers/staging/tm6000/tm6000-video.c
> >> index 492ec73..70fc19e 100644
> >> --- a/drivers/staging/tm6000/tm6000-video.c
> >> +++ b/drivers/staging/tm6000/tm6000-video.c
> >> @@ -1503,7 +1503,6 @@ static int tm6000_open(struct file *file)
> >> tm6000_get_std_res(dev);
> >>
> >> file->private_data = fh;
> >> - fh->vdev = vdev;
> >> fh->dev = dev;
> >> fh->radio = radio;
> >> fh->type = type;
> >> @@ -1606,9 +1605,16 @@ static int tm6000_release(struct file *file)
> >> dev->users--;
> >>
> >> res_free(dev, fh);
> >> +
> >> if (!dev->users) {
> >> + int err;
> >> +
> >> tm6000_uninit_isoc(dev);
> >> videobuf_mmap_free(&fh->vb_vidq);
> >> +
> >> + err = tm6000_reset(dev);
> >> + if (err < 0)
> >> + dev_err(&vdev->dev, "reset failed: %d\n", err);
> >> }
> >>
> >> kfree(fh);
> >> diff --git a/drivers/staging/tm6000/tm6000.h
> >> b/drivers/staging/tm6000/tm6000.h
> >> index cf57e1e..dac2063 100644
> >> --- a/drivers/staging/tm6000/tm6000.h
> >> +++ b/drivers/staging/tm6000/tm6000.h
> >> @@ -311,6 +311,7 @@ int tm6000_set_reg_mask(struct tm6000_core *dev, u8
> >> req, u16 value,
> >> u16 index, u16 mask);
> >> int tm6000_i2c_reset(struct tm6000_core *dev, u16 tsleep);
> >> int tm6000_init(struct tm6000_core *dev);
> >> +int tm6000_reset(struct tm6000_core *dev);
> >>
> >> int tm6000_init_analog_mode(struct tm6000_core *dev);
> >> int tm6000_init_digital_mode(struct tm6000_core *dev);
> >
> > Something went wrong with the patchset. Got an OOPS during device probe.
> > Maybe it were caused due to udev, that opens V4L devices, as soon as they're
> > registered.
>
> int tm6000_reset(struct tm6000_core *dev)
> {
> ...
> msleep(5);
>
> pipe = usb_rcvintpipe(dev->udev,
> dev->int_in.endp->desc.bEndpointAddress &
> USB_ENDPOINT_NUMBER_MASK);
>
>
> The bug is on the above line. It seems that usb_rcvintpipe() didn't like to be
> called before the end of the device registration code.I fail to see how this can happen. tm6000_reset() is only called when the last user closes the file. Since the file can only be opened in the first place when the device has been registered, tm6000_reset() should never be called before the device is registered. Thierry > > > > > > > > [34883.426065] tm6000 #0: registered device video0 > > [34883.430591] Trident TVMaster TM5600/TM6000/TM6010 USB2 board (Load > > status: 0) > > [34883.437763] usbcore: registered new interface driver tm6000 > > [34884.608372] BUG: unable to handle kernel NULL pointer dereference at > > 00000002 > > [34884.615514] IP: [<f8c4ceea>] tm6000_reset+0xd7/0x11c [tm6000] > > [34884.621260] *pde = 00000000 > > [34884.624139] Oops: 0000 [#1] SMP > > [34884.627375] Modules linked in: tuner_xc2028 tuner ir_lirc_codec lirc_dev > > ir_mce_kbd_decoder ir_sony_decoder ir_jvc_decoder ir_rc6_decoder > > ir_rc5_decoder tm6000 ir_nec_decoder videobuf_vmalloc videobuf_core rc_core > > v4l2_common videodev media tcp_lp fuse ebtable_nat ebtables ipt_MASQUERADE > > iptable_nat nf_nat xt_CHECKSUM iptable_mangle bridge stp llc bnep bluetooth > > sunrpc cpufreq_ondemand acpi_cpufreq mperf ip6t_REJECT nf_conntrack_ipv6 > > nf_defrag_ipv6 ip6table_filter nf_conntrack_ipv4 ip6_tables nf_defrag_ipv4 > > xt_state nf_conntrack snd_hda_codec_realtek snd_hda_intel snd_hda_codec > > snd_hwdep snd_seq snd_seq_device snd_pcm i7core_edac edac_core snd_timer > > tg3 snd iTCO_wdt iTCO_vendor_support hp_wmi soundcore pcspkr snd_page_alloc > > floppy sparse_keymap rfkill serio_raw tpm_infineon microcode vboxnetadp > > vboxnetflt vboxdrv firewire_ohci firewire_core crc_itu_t nouveau ttm > > drm_kms_helper drm i2c_algo_bit i2c_core mxm_wmi wmi video [last unloaded: > > tuner_xc2028] > > [34884.712113] > > [34884.713599] Pid: 7448, comm: v4l_id Tainted: G W 3.0.0+ #1 > > Hewlett-Packard HP Z400 Workstation/0AE4h > > [34884.723513] EIP: 0060:[<f8c4ceea>] EFLAGS: 00010246 CPU: 0 > > [34884.728983] EIP is at tm6000_reset+0xd7/0x11c [tm6000] > > [34884.734104] EAX: f676c800 EBX: e38e5800 ECX: 00000000 EDX: 00000003 > > [34884.740349] ESI: 00000000 EDI: efc3c400 EBP: efc19f18 ESP: efc19f04 > > [34884.746594] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 > > [34884.751974] Process v4l_id (pid: 7448, ti=efc18000 task=f6608000 > > task.ti=efc18000) > > [34884.759517] Stack: > > [34884.761519] f2b51c00 efc19f18 f8be3f96 e38e5800 f2b51c00 efc19f44 > > f8c4e6e5 f1b75a40 > > [34884.769318] efc19f2c c0429397 efc19f34 c0810501 efc19f44 efc3c400 > > eb4b8cc0 00000010 > > [34884.777121] efc19f54 f8bb619d eb4b8cc0 f66ffe08 efc19f84 c04e9eaf > > 00000001 00000000 > > [34884.784918] Call Trace: > > [34884.787360] [<f8be3f96>] ? __videobuf_free+0x10c/0x112 [videobuf_core] > > [34884.793958] [<f8c4e6e5>] tm6000_release+0xc7/0xf3 [tm6000] > > [34884.799513] [<c0429397>] ? should_resched+0xd/0x27 > > [34884.804378] [<c0810501>] ? _cond_resched+0xd/0x21 > > [34884.809158] [<f8bb619d>] v4l2_release+0x35/0x52 [videodev] > > [34884.814713] [<c04e9eaf>] fput+0x100/0x1a5 > > [34884.818798] [<c04e75a1>] filp_close+0x5c/0x64 > > [34884.823228] [<c04e7608>] sys_close+0x5f/0x93 > > [34884.827571] [<c081745f>] sysenter_do_call+0x12/0x28 > > [34884.832519] Code: 24 04 40 10 c5 f8 c7 04 24 56 1d c5 f8 89 44 24 08 eb > > 4b b8 05 00 00 00 e8 b2 a7 7f c7 8b 83 44 06 00 00 8b 8b 78 06 00 00 8b 10 > > <0f> b6 49 02 c1 e2 08 83 e1 0f 81 ca 80 00 00 40 c1 e1 0f 09 ca > > [34884.851965] EIP: [<f8c4ceea>] tm6000_reset+0xd7/0x11c [tm6000] SS:ESP > > 0068:efc19f04 > > [34884.859623] CR2: 0000000000000002 > > > > -- > > To unsubscribe from this list: send the line "unsubscribe linux-media" in > > the body of a message to majord...@vger.kernel.org > > More majordomo info at http://vger.kernel.org/majordomo-info.html > >
pgpNDnSbrom0r.pgp
Description: PGP signature
