On 2011-10-07 05:02, Javier Martinez Canillas wrote:
On Fri, Oct 7, 2011 at 12:36 PM, Enrico<ebut...@users.berlios.de> wrote:
On Fri, Oct 7, 2011 at 12:22 PM, Gary Thomas<g...@mlbassoc.com> wrote:
Do we know for sure that these problems are happening in the ISP itself
or could they possibly be in the TVP5150? Does anyone have experience
with a different analogue encoder?
Never tried another encoder, but at this point it's something to look
at. I don't think some TI people will say "yes the encoder has
ghosting artifacts".
Enrico
I have never tried with an different decoder either. I don't think
this is a HW thing. As far as I know the tvp5150 is used in some
em28xx devices that is what Mauro said, and he would notice that
behaviour.
Also, if you try getting 625 lines (for PAL) but disable the
line-output-formatter for deinterlacing, i.e:
pdata->fldmode = 0;
ispccdc_config_outlineoffset(ccdc, pix.bytesperline, EVENEVEN, 0);
ispccdc_config_outlineoffset(ccdc, pix.bytesperline, EVENODD, 0);
ispccdc_config_outlineoffset(ccdc, pix.bytesperline, ODDEVEN, 0);
ispccdc_config_outlineoffset(ccdc, pix.bytesperline, ODDODD, 0);
Then you get a frame with the 313 odd lines and 312 even lines
correctly. That means that the TVP5151 is generating correctly the
interlaced video.
Also the ISP is doing correctly the deinterlacing for a some frames.
But all the approaches used so far (wait for two VD0 interrupt to
change the CCCDC output memory direction), looks more like a hack than
a clean solution to me, but maybe is the only way to do it with the
ISP.
Looking at your sequence of pictures, you can see that image #10 and #11
are pretty good, but #12..14 are all bad, then #15 & 16 are OK again.
In the bad ones, it looks like every other line has been shifted left by
some number of pixels. It's hard to tell, but I think the shift is constant
when it happens.
My guess is that the problem is the ISP driver that before this
configuration (TVP5150/1 + ISP) had never been tested with an video
decoder that generates interlaced data.
Of course, there's the comment in the manual that says it's not supported :-)
According to 12.4.4.1, BT656 (ITU) data can only use progressive scan sensors.
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
