Instead of using dvb_frontend_parameters struct, that were
designed for a subset of the supported standards, use the DVBv5
cache information.
Also, fill the supported delivery systems at dvb_frontend_ops
struct.
Signed-off-by: Mauro Carvalho Chehab <mche...@redhat.com>
---
drivers/media/dvb/frontends/sp8870.c | 27 ++++++++++++++-------------
1 files changed, 14 insertions(+), 13 deletions(-)
diff --git a/drivers/media/dvb/frontends/sp8870.c
b/drivers/media/dvb/frontends/sp8870.c
index d49e48c..bad1832 100644
--- a/drivers/media/dvb/frontends/sp8870.c
+++ b/drivers/media/dvb/frontends/sp8870.c
@@ -168,13 +168,13 @@ static int sp8870_read_data_valid_signal(struct
sp8870_state* state)
return (sp8870_readreg(state, 0x0D02) > 0);
}
-static int configure_reg0xc05 (struct dvb_frontend_parameters *p, u16
*reg0xc05)
+static int configure_reg0xc05 (struct dtv_frontend_properties *p, u16
*reg0xc05)
{
int known_parameters = 1;
*reg0xc05 = 0x000;
- switch (p->u.ofdm.constellation) {
+ switch (p->modulation) {
case QPSK:
break;
case QAM_16:
@@ -190,7 +190,7 @@ static int configure_reg0xc05 (struct
dvb_frontend_parameters *p, u16 *reg0xc05)
return -EINVAL;
};
- switch (p->u.ofdm.hierarchy_information) {
+ switch (p->hierarchy) {
case HIERARCHY_NONE:
break;
case HIERARCHY_1:
@@ -209,7 +209,7 @@ static int configure_reg0xc05 (struct
dvb_frontend_parameters *p, u16 *reg0xc05)
return -EINVAL;
};
- switch (p->u.ofdm.code_rate_HP) {
+ switch (p->code_rate_HP) {
case FEC_1_2:
break;
case FEC_2_3:
@@ -245,9 +245,9 @@ static int sp8870_wake_up(struct sp8870_state* state)
return sp8870_writereg(state, 0xC18, 0x00D);
}
-static int sp8870_set_frontend_parameters (struct dvb_frontend* fe,
- struct dvb_frontend_parameters *p)
+static int sp8870_set_frontend_parameters(struct dvb_frontend *fe)
{
+ struct dtv_frontend_properties *p = &fe->dtv_property_cache;
struct sp8870_state* state = fe->demodulator_priv;
int err;
u16 reg0xc05;
@@ -277,15 +277,15 @@ static int sp8870_set_frontend_parameters (struct
dvb_frontend* fe,
sp8870_writereg(state, 0x030A, 0x0000);
// filter for 6/7/8 Mhz channel
- if (p->u.ofdm.bandwidth == BANDWIDTH_6_MHZ)
+ if (p->bandwidth_hz == 6000000)
sp8870_writereg(state, 0x0311, 0x0002);
- else if (p->u.ofdm.bandwidth == BANDWIDTH_7_MHZ)
+ else if (p->bandwidth_hz == 7000000)
sp8870_writereg(state, 0x0311, 0x0001);
else
sp8870_writereg(state, 0x0311, 0x0000);
// scan order: 2k first = 0x0000, 8k first = 0x0001
- if (p->u.ofdm.transmission_mode == TRANSMISSION_MODE_2K)
+ if (p->transmission_mode == TRANSMISSION_MODE_2K)
sp8870_writereg(state, 0x0338, 0x0000);
else
sp8870_writereg(state, 0x0338, 0x0001);
@@ -459,8 +459,9 @@ static int lockups;
/* only for debugging: counter for channel switches */
static int switches;
-static int sp8870_set_frontend (struct dvb_frontend* fe, struct
dvb_frontend_parameters *p)
+static int sp8870_set_frontend(struct dvb_frontend *fe)
{
+ struct dtv_frontend_properties *p = &fe->dtv_property_cache;
struct sp8870_state* state = fe->demodulator_priv;
/*
@@ -479,7 +480,7 @@ static int sp8870_set_frontend (struct dvb_frontend* fe,
struct dvb_frontend_par
for (trials = 1; trials <= MAXTRIALS; trials++) {
- if ((err = sp8870_set_frontend_parameters(fe, p)))
+ if ((err = sp8870_set_frontend_parameters(fe)))
return err;
for (check_count = 0; check_count < MAXCHECKS; check_count++) {
@@ -579,7 +580,7 @@ error:
}
static struct dvb_frontend_ops sp8870_ops = {
-
+ .delsys = { SYS_DVBT },
.info = {
.name = "Spase SP8870 DVB-T",
.type = FE_OFDM,
@@ -600,7 +601,7 @@ static struct dvb_frontend_ops sp8870_ops = {
.sleep = sp8870_sleep,
.i2c_gate_ctrl = sp8870_i2c_gate_ctrl,
- .set_frontend_legacy = sp8870_set_frontend,
+ .set_frontend = sp8870_set_frontend,
.get_tune_settings = sp8870_get_tune_settings,
.read_status = sp8870_read_status,
--
1.7.8.352.g876a6
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
