Instead of using dvb_frontend_parameters struct, that were
designed for a subset of the supported standards, use the DVBv5
cache information.

Also, fill the supported delivery systems at dvb_frontend_ops
struct.

Signed-off-by: Mauro Carvalho Chehab <mche...@redhat.com>
---
 drivers/media/dvb/frontends/lgdt330x.c |   30 ++++++++++++++++--------------
 1 files changed, 16 insertions(+), 14 deletions(-)

diff --git a/drivers/media/dvb/frontends/lgdt330x.c 
b/drivers/media/dvb/frontends/lgdt330x.c
index 21bffc0..f117eeb 100644
--- a/drivers/media/dvb/frontends/lgdt330x.c
+++ b/drivers/media/dvb/frontends/lgdt330x.c
@@ -307,9 +307,9 @@ static int lgdt330x_read_ucblocks(struct dvb_frontend* fe, 
u32* ucblocks)
        return 0;
 }
 
-static int lgdt330x_set_parameters(struct dvb_frontend* fe,
-                                  struct dvb_frontend_parameters *param)
+static int lgdt330x_set_parameters(struct dvb_frontend* fe)
 {
+       struct dtv_frontend_properties *p = &fe->dtv_property_cache;
        /*
         * Array of byte pairs <address, value>
         * to initialize 8VSB for lgdt3303 chip 50 MHz IF
@@ -345,8 +345,8 @@ static int lgdt330x_set_parameters(struct dvb_frontend* fe,
 
        int err;
        /* Change only if we are actually changing the modulation */
-       if (state->current_modulation != param->u.vsb.modulation) {
-               switch(param->u.vsb.modulation) {
+       if (state->current_modulation != p->modulation) {
+               switch(p->modulation) {
                case VSB_8:
                        dprintk("%s: VSB_8 MODE\n", __func__);
 
@@ -395,7 +395,7 @@ static int lgdt330x_set_parameters(struct dvb_frontend* fe,
                        }
                        break;
                default:
-                       printk(KERN_WARNING "lgdt330x: %s: Modulation type(%d) 
UNSUPPORTED\n", __func__, param->u.vsb.modulation);
+                       printk(KERN_WARNING "lgdt330x: %s: Modulation type(%d) 
UNSUPPORTED\n", __func__, p->modulation);
                        return -1;
                }
                /*
@@ -410,7 +410,7 @@ static int lgdt330x_set_parameters(struct dvb_frontend* fe,
                                      sizeof(top_ctrl_cfg));
                if (state->config->set_ts_params)
                        state->config->set_ts_params(fe, 0);
-               state->current_modulation = param->u.vsb.modulation;
+               state->current_modulation = p->modulation;
        }
 
        /* Tune to the specified frequency */
@@ -422,17 +422,17 @@ static int lgdt330x_set_parameters(struct dvb_frontend* 
fe,
        /* Keep track of the new frequency */
        /* FIXME this is the wrong way to do this...           */
        /* The tuner is shared with the video4linux analog API */
-       state->current_frequency = param->frequency;
+       state->current_frequency = p->frequency;
 
        lgdt330x_SwReset(state);
        return 0;
 }
 
-static int lgdt330x_get_frontend(struct dvb_frontend* fe,
-                                struct dvb_frontend_parameters* param)
+static int lgdt330x_get_frontend(struct dvb_frontend *fe,
+                                struct dtv_frontend_properties *p)
 {
        struct lgdt330x_state *state = fe->demodulator_priv;
-       param->frequency = state->current_frequency;
+       p->frequency = state->current_frequency;
        return 0;
 }
 
@@ -762,6 +762,7 @@ error:
 }
 
 static struct dvb_frontend_ops lgdt3302_ops = {
+       .delsys = { SYS_ATSC, SYS_DVBC_ANNEX_B },
        .info = {
                .name= "LG Electronics LGDT3302 VSB/QAM Frontend",
                .type = FE_ATSC,
@@ -773,8 +774,8 @@ static struct dvb_frontend_ops lgdt3302_ops = {
                .caps = FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_8VSB
        },
        .init                 = lgdt330x_init,
-       .set_frontend_legacy         = lgdt330x_set_parameters,
-       .get_frontend_legacy = lgdt330x_get_frontend,
+       .set_frontend         = lgdt330x_set_parameters,
+       .get_frontend         = lgdt330x_get_frontend,
        .get_tune_settings    = lgdt330x_get_tune_settings,
        .read_status          = lgdt3302_read_status,
        .read_ber             = lgdt330x_read_ber,
@@ -785,6 +786,7 @@ static struct dvb_frontend_ops lgdt3302_ops = {
 };
 
 static struct dvb_frontend_ops lgdt3303_ops = {
+       .delsys = { SYS_ATSC, SYS_DVBC_ANNEX_B },
        .info = {
                .name= "LG Electronics LGDT3303 VSB/QAM Frontend",
                .type = FE_ATSC,
@@ -796,8 +798,8 @@ static struct dvb_frontend_ops lgdt3303_ops = {
                .caps = FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_8VSB
        },
        .init                 = lgdt330x_init,
-       .set_frontend_legacy         = lgdt330x_set_parameters,
-       .get_frontend_legacy = lgdt330x_get_frontend,
+       .set_frontend         = lgdt330x_set_parameters,
+       .get_frontend         = lgdt330x_get_frontend,
        .get_tune_settings    = lgdt330x_get_tune_settings,
        .read_status          = lgdt3303_read_status,
        .read_ber             = lgdt330x_read_ber,
-- 
1.7.8.352.g876a6

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to