Hi,
On 01/16/2012 10:33 PM, Sylwester Nawrocki wrote:
> diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
> index 012a296..0808b12 100644
> --- a/include/linux/videodev2.h
> +++ b/include/linux/videodev2.h
> @@ -1662,6 +1662,34 @@ enum v4l2_exposure_auto_type {
> #define V4L2_CID_IRIS_ABSOLUTE
> (V4L2_CID_CAMERA_CLASS_BASE+17)
> #define V4L2_CID_IRIS_RELATIVE
> (V4L2_CID_CAMERA_CLASS_BASE+18)
>
> +#define V4L2_CID_AUTO_FOCUS_START (V4L2_CID_CAMERA_CLASS_BASE+19)
> +#define V4L2_CID_AUTO_FOCUS_STOP (V4L2_CID_CAMERA_CLASS_BASE+20)
> +#define V4L2_CID_AUTO_FOCUS_STATUS (V4L2_CID_CAMERA_CLASS_BASE+21)
> +enum v4l2_auto_focus_status {
> + V4L2_AUTO_FOCUS_STATUS_IDLE = 0,
> + V4L2_AUTO_FOCUS_STATUS_BUSY = 1,
> + V4L2_AUTO_FOCUS_STATUS_SUCCESS = 2,
> + V4L2_AUTO_FOCUS_STATUS_FAIL = 3,
> +};
> +
> +#define V4L2_CID_AUTO_FOCUS_DISTANCE (V4L2_CID_CAMERA_CLASS_BASE+22)
> +enum v4l2_auto_focus_distance {
> + V4L2_AUTO_FOCUS_DISTANCE_NORMAL = 0,
> + V4L2_AUTO_FOCUS_DISTANCE_MACRO = 1,
> + V4L2_AUTO_FOCUS_DISTANCE_INFINITY = 2,
> +};
> +
> +#define V4L2_CID_AUTO_FOCUS_SELECTION
> (V4L2_CID_CAMERA_CLASS_BASE+23)
> +enum v4l2_auto_focus_selection {
> + V4L2_AUTO_FOCUS_SELECTION_NORMAL = 0,
> + V4L2_AUTO_FOCUS_SELECTION_SPOT = 1,
> + V4L2_AUTO_FOCUS_SELECTION_RECTANGLE = 2,
> +};
I'd like to ask your advice, I've found those two above controls
rather painful in use. After changing V4L2_CID_AUTO_FOCUS_SELECTION to
#define V4L2_CID_AUTO_FOCUS_AREA (V4L2_CID_CAMERA_CLASS_BASE+23)
enum v4l2_auto_focus_selection {
V4L2_AUTO_FOCUS_SELECTION_ALL = 0,
V4L2_AUTO_FOCUS_SELECTION_SPOT = 1,
V4L2_AUTO_FOCUS_SELECTION_RECTANGLE = 2,
};
I tried use them with the M-5MOLS sensor driver where there is only
one register for setting following automatic focus modes:
NORMAL AUTO (single-shot),
MACRO,
INFINITY,
SPOT,
FACE_DETECTION
The issue is that when V4L2_CID_AUTO_FOCUS_AREA is set to for example
V4L2_AUTO_FOCUS_SELECTION_SPOT, none of the menu entries of
V4L2_CID_AUTO_FOCUS_DISTANCE is valid.
So it would really be better to use single control for automatic focus
mode. A private control could handle that. But there will be more than
one sensor driver needing such a control, so I thought about an
additional header, e.g. samsung_camera.h in include/linux/ that would
define reguired control IDs and menus in the camera class private id
range.
What do you think about it ?
> +#define V4L2_CID_AUTO_FOCUS_X_POSITION
> (V4L2_CID_CAMERA_CLASS_BASE+24)
> +#define V4L2_CID_AUTO_FOCUS_Y_POSITION
> (V4L2_CID_CAMERA_CLASS_BASE+25)
...
--
Regards,
Sylwester
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html