On 02/26/2012 05:57 PM, Sylwester Nawrocki wrote:
> rather painful in use. After changing V4L2_CID_AUTO_FOCUS_SELECTION to
>
> #define V4L2_CID_AUTO_FOCUS_AREA (V4L2_CID_CAMERA_CLASS_BASE+23)
Oops, of course each occurence of "SELECTION" below should be replaced with
"AREA". Sorry for the confusion.
> enum v4l2_auto_focus_selection {
> V4L2_AUTO_FOCUS_SELECTION_ALL = 0,
> V4L2_AUTO_FOCUS_SELECTION_SPOT = 1,
> V4L2_AUTO_FOCUS_SELECTION_RECTANGLE = 2,
> };
>
> I tried use them with the M-5MOLS sensor driver where there is only
> one register for setting following automatic focus modes:
>
> NORMAL AUTO (single-shot),
> MACRO,
> INFINITY,
> SPOT,
> FACE_DETECTION
>
> The issue is that when V4L2_CID_AUTO_FOCUS_AREA is set to for example
> V4L2_AUTO_FOCUS_SELECTION_SPOT, none of the menu entries of
> V4L2_CID_AUTO_FOCUS_DISTANCE is valid.
>
> So it would really be better to use single control for automatic focus
> mode. A private control could handle that. But there will be more than
> one sensor driver needing such a control, so I thought about an
> additional header, e.g. samsung_camera.h in include/linux/ that would
> define reguired control IDs and menus in the camera class private id
> range.
>
> What do you think about it ?
>
>
>> +#define V4L2_CID_AUTO_FOCUS_X_POSITION
>> (V4L2_CID_CAMERA_CLASS_BASE+24)
>> +#define V4L2_CID_AUTO_FOCUS_Y_POSITION
>> (V4L2_CID_CAMERA_CLASS_BASE+25)
> ...
>
> --
>
> Regards,
> Sylwester
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html