On Sat, 2012-03-03 at 16:28 +0100, Laurent Pinchart wrote:
> Add a generic helper function to compute PLL parameters for PLL found in
> several Aptina sensors.
>
> Signed-off-by: Laurent Pinchart <[email protected]>
> ---
> drivers/media/video/Kconfig | 3 +
> drivers/media/video/Makefile | 4 +
> drivers/media/video/aptina-pll.c | 175
> ++++++++++++++++++++++++++++++++++++++
> drivers/media/video/aptina-pll.h | 55 ++++++++++++
> 4 files changed, 237 insertions(+), 0 deletions(-)
> create mode 100644 drivers/media/video/aptina-pll.c
> create mode 100644 drivers/media/video/aptina-pll.h
>
> diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
> index 80acb78..410baf2 100644
> --- a/drivers/media/video/Kconfig
> +++ b/drivers/media/video/Kconfig
> @@ -459,6 +459,9 @@ config VIDEO_AK881X
>
> comment "Camera sensor devices"
>
> +config VIDEO_APTINA_PLL
> + tristate
> +
> config VIDEO_OV7670
> tristate "OmniVision OV7670 sensor support"
> depends on I2C && VIDEO_V4L2
> diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
> index 9b19533..8e037e9 100644
> --- a/drivers/media/video/Makefile
> +++ b/drivers/media/video/Makefile
> @@ -22,6 +22,10 @@ endif
>
> obj-$(CONFIG_VIDEO_V4L2_COMMON) += v4l2-common.o
>
> +# Helper modules
> +
> +obj-$(CONFIG_VIDEO_APTINA_PLL) += aptina-pll.o
> +
> # All i2c modules must come first:
>
> obj-$(CONFIG_VIDEO_TUNER) += tuner.o
> diff --git a/drivers/media/video/aptina-pll.c
> b/drivers/media/video/aptina-pll.c
> new file mode 100644
> index 0000000..55e4a40
> --- /dev/null
> +++ b/drivers/media/video/aptina-pll.c
> @@ -0,0 +1,175 @@
> +/*
> + * Aptina Sensor PLL Configuration
> + *
> + * Copyright (C) 2012 Laurent Pinchart <[email protected]>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
> + * 02110-1301 USA
> + */
> +
> +#include <linux/device.h>
> +#include <linux/gcd.h>
> +#include <linux/kernel.h>
> +#include <linux/lcm.h>
> +#include <linux/module.h>
> +
> +#include "aptina-pll.h"
> +
> +int aptina_pll_configure(struct device *dev, struct aptina_pll *pll,
> + const struct aptina_pll_limits *limits)
> +{
> + unsigned int mf_min;
> + unsigned int mf_max;
> + unsigned int p1_min;
> + unsigned int p1_max;
> + unsigned int p1;
> + unsigned int div;
> +
> + if (pll->ext_clock < limits->ext_clock_min ||
> + pll->ext_clock > limits->ext_clock_max) {
> + dev_err(dev, "pll: invalid external clock frequency.\n");
> + return -EINVAL;
> + }
> +
> + if (pll->pix_clock > limits->pix_clock_max) {
> + dev_err(dev, "pll: invalid pixel clock frequency.\n");
> + return -EINVAL;
> + }
> +
> + /* Compute the multiplier M and combined N*P1 divisor. */
> + div = gcd(pll->pix_clock, pll->ext_clock);
> + pll->m = pll->pix_clock / div;
> + div = pll->ext_clock / div;
> +
> + /* We now have the smallest M and N*P1 values that will result in the
> + * desired pixel clock frequency, but they might be out of the valid
> + * range. Compute the factor by which we should multiply them given the
> + * following constraints:
> + *
> + * - minimum/maximum multiplier
> + * - minimum/maximum multiplier output clock frequency assuming the
> + * minimum/maximum N value
> + * - minimum/maximum combined N*P1 divisor
> + */
> + mf_min = DIV_ROUND_UP(limits->m_min, pll->m);
> + mf_min = max(mf_min, limits->out_clock_min /
> + (pll->ext_clock / limits->n_min * pll->m));
> + mf_min = max(mf_min, limits->n_min * limits->p1_min / div);
> + mf_max = limits->m_max / pll->m;
> + mf_max = min(mf_max, limits->out_clock_max /
> + (pll->ext_clock / limits->n_max * pll->m));
> + mf_max = min(mf_max, DIV_ROUND_UP(limits->n_max * limits->p1_max, div));
> +
> + dev_dbg(dev, "pll: mf min %u max %u\n", mf_min, mf_max);
> + if (mf_min > mf_max) {
> + dev_err(dev, "pll: no valid combined N*P1 divisor.\n");
> + return -EINVAL;
> + }
> +
> + /*
> + * We're looking for the highest acceptable P1 value
Why the *highest* acceptable post-divide (P1) value?
> for which a
> + * multiplier factor MF exists that fulfills the following conditions:
> + *
> + * 1. p1 is in the [p1_min, p1_max] range given by the limits and is
> + * even
> + * 2. mf is in the [mf_min, mf_max] range computed above
> + * 3. div * mf is a multiple of p1, in order to compute
> + * n = div * mf / p1
> + * m = pll->m * mf
> + * 4. the internal clock frequency, given by ext_clock / n, is in the
> + * [int_clock_min, int_clock_max] range given by the limits
> + * 5. the output clock frequency, given by ext_clock / n * m, is in the
> + * [out_clock_min, out_clock_max] range given by the limits
> + *
So just to make your constrained optimzation problem even more complex:
I would imagine you would get faster PLL lock and less phase noise by
having the VCO operate near its center frequency.
If you think that is a sensible constraint, then that translates to
having the PLL output before post-divide (i.e. ext_clock / n * m), to be
as close as possible to the center frequency of the VCO (i.e.
(out_clock_max - out_clock_min) / 2 ).
Regards,
Andy
> + * The first naive approach is to iterate over all p1 values acceptable
> + * according to (1) and all mf values acceptable according to (2), and
> + * stop at the first combination that fulfills (3), (4) and (5). This
> + * has a O(n^2) complexity.
> + *
> + * Instead of iterating over all mf values in the [mf_min, mf_max] range
> + * we can compute the mf increment between two acceptable values
> + * according to (3) with
> + *
> + * mf_inc = lcm(div, p1) / div (6)
> + *
> + * and round the minimum up to the nearest multiple of mf_inc. This will
> + * restrict the number of mf values to be checked.
> + *
> + * Furthermore, conditions (4) and (5) only restrict the range of
> + * acceptable p1 and mf values by modifying the minimum and maximum
> + * limits. (5) can be expressed as
> + *
> + * ext_clock / (div * mf / p1) * m * mf >= out_clock_min
> + * ext_clock / (div * mf / p1) * m * mf <= out_clock_max
> + *
> + * or
> + *
> + * p1 >= out_clock_min * div / (ext_clock * m) (7)
> + * p1 <= out_clock_max * div / (ext_clock * m)
> + *
> + * Similarly, (4) can be expressed as
> + *
> + * mf >= ext_clock * p1 / (int_clock_max * div) (8)
> + * mf <= ext_clock * p1 / (int_clock_min * div)
> + *
> + * We can thus iterate over the restricted p1 range defined by the
> + * combination of (1) and (7), and then compute the restricted mf range
> + * defined by the combination of (2), (6) and (8). If the resulting mf
> + * range is not empty, any value in the mf range is acceptable. We thus
> + * select the mf lwoer bound and the corresponding p1 value.
> + */
> + if (limits->p1_min == 0) {
> + dev_err(dev, "pll: P1 minimum value must be >0.\n");
> + return -EINVAL;
> + }
> +
> + p1_min = max(limits->p1_min, DIV_ROUND_UP(limits->out_clock_min * div,
> + pll->ext_clock * pll->m));
> + p1_max = min(limits->p1_max, limits->out_clock_max * div /
> + (pll->ext_clock * pll->m));
> +
> + for (p1 = p1_max & ~1; p1 >= p1_min; p1 -= 2) {
> + unsigned int mf_inc = lcm(div, p1) / div;
> + unsigned int mf_high;
> + unsigned int mf_low;
> +
> + mf_low = max(roundup(mf_min, mf_inc),
> + DIV_ROUND_UP(pll->ext_clock * p1,
> + limits->int_clock_max * div));
> + mf_high = min(mf_max, pll->ext_clock * p1 /
> + (limits->int_clock_min * div));
> +
> + if (mf_low <= mf_high) {
> + pll->n = div * mf_low / p1;
> + pll->m *= mf_low;
> + pll->p1 = p1;
> + break;
> + }
> + }
> +
> + if (p1 < p1_min) {
> + dev_err(dev, "pll: no valid N and P1 divisors found.\n");
> + return -EINVAL;
> + }
> +
> + dev_dbg(dev, "PLL: ext clock %u N %u M %u P1 %u pix clock %u\n",
> + pll->ext_clock, pll->n, pll->m, pll->p1, pll->pix_clock);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(aptina_pll_configure);
> +
> +MODULE_DESCRIPTION("Aptina PLL Helpers");
> +MODULE_AUTHOR("Laurent Pinchart <[email protected]>");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/media/video/aptina-pll.h
> b/drivers/media/video/aptina-pll.h
> new file mode 100644
> index 0000000..36a9363
> --- /dev/null
> +++ b/drivers/media/video/aptina-pll.h
> @@ -0,0 +1,55 @@
> +/*
> + * Aptina Sensor PLL Configuration
> + *
> + * Copyright (C) 2012 Laurent Pinchart <[email protected]>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
> + * 02110-1301 USA
> + */
> +
> +#ifndef __APTINA_PLL_H
> +#define __APTINA_PLL_H
> +
> +struct aptina_pll {
> + unsigned int ext_clock;
> + unsigned int pix_clock;
> +
> + unsigned int n;
> + unsigned int m;
> + unsigned int p1;
> +};
> +
> +struct aptina_pll_limits {
> + unsigned int ext_clock_min;
> + unsigned int ext_clock_max;
> + unsigned int int_clock_min;
> + unsigned int int_clock_max;
> + unsigned int out_clock_min;
> + unsigned int out_clock_max;
> + unsigned int pix_clock_max;
> +
> + unsigned int n_min;
> + unsigned int n_max;
> + unsigned int m_min;
> + unsigned int m_max;
> + unsigned int p1_min;
> + unsigned int p1_max;
> +};
> +
> +struct device;
> +
> +int aptina_pll_configure(struct device *dev, struct aptina_pll *pll,
> + const struct aptina_pll_limits *limits);
> +
> +#endif /* __APTINA_PLL_H */
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html