On Sat, 2012-03-03 at 12:35 -0500, Andy Walls wrote:
> On Sat, 2012-03-03 at 16:28 +0100, Laurent Pinchart wrote:
> > Add a generic helper function to compute PLL parameters for PLL found in
> > several Aptina sensors.
> >
> > Signed-off-by: Laurent Pinchart <[email protected]>
> > ---
> > drivers/media/video/Kconfig | 3 +
> > drivers/media/video/Makefile | 4 +
> > drivers/media/video/aptina-pll.c | 175
> > ++++++++++++++++++++++++++++++++++++++
> > drivers/media/video/aptina-pll.h | 55 ++++++++++++
> > 4 files changed, 237 insertions(+), 0 deletions(-)
> > create mode 100644 drivers/media/video/aptina-pll.c
> > create mode 100644 drivers/media/video/aptina-pll.h
> >
> > diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
> > index 80acb78..410baf2 100644
> > --- a/drivers/media/video/Kconfig
> > +++ b/drivers/media/video/Kconfig
> > @@ -459,6 +459,9 @@ config VIDEO_AK881X
> >
> > comment "Camera sensor devices"
> >
> > +config VIDEO_APTINA_PLL
> > + tristate
> > +
> > config VIDEO_OV7670
> > tristate "OmniVision OV7670 sensor support"
> > depends on I2C && VIDEO_V4L2
> > diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
> > index 9b19533..8e037e9 100644
> > --- a/drivers/media/video/Makefile
> > +++ b/drivers/media/video/Makefile
> > @@ -22,6 +22,10 @@ endif
> >
> > obj-$(CONFIG_VIDEO_V4L2_COMMON) += v4l2-common.o
> >
> > +# Helper modules
> > +
> > +obj-$(CONFIG_VIDEO_APTINA_PLL) += aptina-pll.o
> > +
> > # All i2c modules must come first:
> >
> > obj-$(CONFIG_VIDEO_TUNER) += tuner.o
> > diff --git a/drivers/media/video/aptina-pll.c
> > b/drivers/media/video/aptina-pll.c
> > new file mode 100644
> > index 0000000..55e4a40
> > --- /dev/null
> > +++ b/drivers/media/video/aptina-pll.c
> > @@ -0,0 +1,175 @@
> > +/*
> > + * Aptina Sensor PLL Configuration
> > + *
> > + * Copyright (C) 2012 Laurent Pinchart <[email protected]>
> > + *
> > + * This program is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License
> > + * version 2 as published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful, but
> > + * WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> > + * General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU General Public License
> > + * along with this program; if not, write to the Free Software
> > + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
> > + * 02110-1301 USA
> > + */
> > +
> > +#include <linux/device.h>
> > +#include <linux/gcd.h>
> > +#include <linux/kernel.h>
> > +#include <linux/lcm.h>
> > +#include <linux/module.h>
> > +
> > +#include "aptina-pll.h"
> > +
> > +int aptina_pll_configure(struct device *dev, struct aptina_pll *pll,
> > + const struct aptina_pll_limits *limits)
> > +{
> > + unsigned int mf_min;
> > + unsigned int mf_max;
> > + unsigned int p1_min;
> > + unsigned int p1_max;
> > + unsigned int p1;
> > + unsigned int div;
> > +
> > + if (pll->ext_clock < limits->ext_clock_min ||
> > + pll->ext_clock > limits->ext_clock_max) {
> > + dev_err(dev, "pll: invalid external clock frequency.\n");
> > + return -EINVAL;
> > + }
> > +
> > + if (pll->pix_clock > limits->pix_clock_max) {
> > + dev_err(dev, "pll: invalid pixel clock frequency.\n");
> > + return -EINVAL;
> > + }
> > +
> > + /* Compute the multiplier M and combined N*P1 divisor. */
> > + div = gcd(pll->pix_clock, pll->ext_clock);
> > + pll->m = pll->pix_clock / div;
> > + div = pll->ext_clock / div;
> > +
> > + /* We now have the smallest M and N*P1 values that will result in the
> > + * desired pixel clock frequency, but they might be out of the valid
> > + * range. Compute the factor by which we should multiply them given the
> > + * following constraints:
> > + *
> > + * - minimum/maximum multiplier
> > + * - minimum/maximum multiplier output clock frequency assuming the
> > + * minimum/maximum N value
> > + * - minimum/maximum combined N*P1 divisor
> > + */
> > + mf_min = DIV_ROUND_UP(limits->m_min, pll->m);
> > + mf_min = max(mf_min, limits->out_clock_min /
> > + (pll->ext_clock / limits->n_min * pll->m));
> > + mf_min = max(mf_min, limits->n_min * limits->p1_min / div);
> > + mf_max = limits->m_max / pll->m;
> > + mf_max = min(mf_max, limits->out_clock_max /
> > + (pll->ext_clock / limits->n_max * pll->m));
> > + mf_max = min(mf_max, DIV_ROUND_UP(limits->n_max * limits->p1_max, div));
> > +
> > + dev_dbg(dev, "pll: mf min %u max %u\n", mf_min, mf_max);
> > + if (mf_min > mf_max) {
> > + dev_err(dev, "pll: no valid combined N*P1 divisor.\n");
> > + return -EINVAL;
> > + }
> > +
> > + /*
> > + * We're looking for the highest acceptable P1 value
>
> Why the *highest* acceptable post-divide (P1) value?
>
> > for which a
> > + * multiplier factor MF exists that fulfills the following conditions:
> > + *
> > + * 1. p1 is in the [p1_min, p1_max] range given by the limits and is
> > + * even
> > + * 2. mf is in the [mf_min, mf_max] range computed above
> > + * 3. div * mf is a multiple of p1, in order to compute
> > + * n = div * mf / p1
> > + * m = pll->m * mf
> > + * 4. the internal clock frequency, given by ext_clock / n, is in the
> > + * [int_clock_min, int_clock_max] range given by the limits
> > + * 5. the output clock frequency, given by ext_clock / n * m, is in the
> > + * [out_clock_min, out_clock_max] range given by the limits
> > + *
>
> So just to make your constrained optimzation problem even more complex:
>
> I would imagine you would get faster PLL lock and less phase noise by
> having the VCO operate near its center frequency.
>
> If you think that is a sensible constraint, then that translates to
> having the PLL output before post-divide (i.e. ext_clock / n * m), to be
> as close as possible to the center frequency of the VCO (i.e.
> (out_clock_max - out_clock_min) / 2 ).
Oops, I hate math in public. :P
I obviously meant
(out_clock_max + out_clock_min) / 2
for the center frequency of the VCO.
Regards,
Andy
> Regards,
> Andy
>
>
> > + * The first naive approach is to iterate over all p1 values acceptable
> > + * according to (1) and all mf values acceptable according to (2), and
> > + * stop at the first combination that fulfills (3), (4) and (5). This
> > + * has a O(n^2) complexity.
> > + *
> > + * Instead of iterating over all mf values in the [mf_min, mf_max] range
> > + * we can compute the mf increment between two acceptable values
> > + * according to (3) with
> > + *
> > + * mf_inc = lcm(div, p1) / div (6)
> > + *
> > + * and round the minimum up to the nearest multiple of mf_inc. This will
> > + * restrict the number of mf values to be checked.
> > + *
> > + * Furthermore, conditions (4) and (5) only restrict the range of
> > + * acceptable p1 and mf values by modifying the minimum and maximum
> > + * limits. (5) can be expressed as
> > + *
> > + * ext_clock / (div * mf / p1) * m * mf >= out_clock_min
> > + * ext_clock / (div * mf / p1) * m * mf <= out_clock_max
> > + *
> > + * or
> > + *
> > + * p1 >= out_clock_min * div / (ext_clock * m) (7)
> > + * p1 <= out_clock_max * div / (ext_clock * m)
> > + *
> > + * Similarly, (4) can be expressed as
> > + *
> > + * mf >= ext_clock * p1 / (int_clock_max * div) (8)
> > + * mf <= ext_clock * p1 / (int_clock_min * div)
> > + *
> > + * We can thus iterate over the restricted p1 range defined by the
> > + * combination of (1) and (7), and then compute the restricted mf range
> > + * defined by the combination of (2), (6) and (8). If the resulting mf
> > + * range is not empty, any value in the mf range is acceptable. We thus
> > + * select the mf lwoer bound and the corresponding p1 value.
> > + */
> > + if (limits->p1_min == 0) {
> > + dev_err(dev, "pll: P1 minimum value must be >0.\n");
> > + return -EINVAL;
> > + }
> > +
> > + p1_min = max(limits->p1_min, DIV_ROUND_UP(limits->out_clock_min * div,
> > + pll->ext_clock * pll->m));
> > + p1_max = min(limits->p1_max, limits->out_clock_max * div /
> > + (pll->ext_clock * pll->m));
> > +
> > + for (p1 = p1_max & ~1; p1 >= p1_min; p1 -= 2) {
> > + unsigned int mf_inc = lcm(div, p1) / div;
> > + unsigned int mf_high;
> > + unsigned int mf_low;
> > +
> > + mf_low = max(roundup(mf_min, mf_inc),
> > + DIV_ROUND_UP(pll->ext_clock * p1,
> > + limits->int_clock_max * div));
> > + mf_high = min(mf_max, pll->ext_clock * p1 /
> > + (limits->int_clock_min * div));
> > +
> > + if (mf_low <= mf_high) {
> > + pll->n = div * mf_low / p1;
> > + pll->m *= mf_low;
> > + pll->p1 = p1;
> > + break;
> > + }
> > + }
> > +
> > + if (p1 < p1_min) {
> > + dev_err(dev, "pll: no valid N and P1 divisors found.\n");
> > + return -EINVAL;
> > + }
> > +
> > + dev_dbg(dev, "PLL: ext clock %u N %u M %u P1 %u pix clock %u\n",
> > + pll->ext_clock, pll->n, pll->m, pll->p1, pll->pix_clock);
> > +
> > + return 0;
> > +}
> > +EXPORT_SYMBOL_GPL(aptina_pll_configure);
> > +
> > +MODULE_DESCRIPTION("Aptina PLL Helpers");
> > +MODULE_AUTHOR("Laurent Pinchart <[email protected]>");
> > +MODULE_LICENSE("GPL v2");
> > diff --git a/drivers/media/video/aptina-pll.h
> > b/drivers/media/video/aptina-pll.h
> > new file mode 100644
> > index 0000000..36a9363
> > --- /dev/null
> > +++ b/drivers/media/video/aptina-pll.h
> > @@ -0,0 +1,55 @@
> > +/*
> > + * Aptina Sensor PLL Configuration
> > + *
> > + * Copyright (C) 2012 Laurent Pinchart <[email protected]>
> > + *
> > + * This program is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License
> > + * version 2 as published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful, but
> > + * WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> > + * General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU General Public License
> > + * along with this program; if not, write to the Free Software
> > + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
> > + * 02110-1301 USA
> > + */
> > +
> > +#ifndef __APTINA_PLL_H
> > +#define __APTINA_PLL_H
> > +
> > +struct aptina_pll {
> > + unsigned int ext_clock;
> > + unsigned int pix_clock;
> > +
> > + unsigned int n;
> > + unsigned int m;
> > + unsigned int p1;
> > +};
> > +
> > +struct aptina_pll_limits {
> > + unsigned int ext_clock_min;
> > + unsigned int ext_clock_max;
> > + unsigned int int_clock_min;
> > + unsigned int int_clock_max;
> > + unsigned int out_clock_min;
> > + unsigned int out_clock_max;
> > + unsigned int pix_clock_max;
> > +
> > + unsigned int n_min;
> > + unsigned int n_max;
> > + unsigned int m_min;
> > + unsigned int m_max;
> > + unsigned int p1_min;
> > + unsigned int p1_max;
> > +};
> > +
> > +struct device;
> > +
> > +int aptina_pll_configure(struct device *dev, struct aptina_pll *pll,
> > + const struct aptina_pll_limits *limits);
> > +
> > +#endif /* __APTINA_PLL_H */
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html