Thomas,
in your patch for the RTL28xxu you introduce a tuner callback (see below). You
called the command FC0012_FE_CALLBACK_UHF_ENABLE.
Since the argument is currently defined to be true if the frequency is below
300MHz, i.e. the argument is true if the frequency is a VHF frequency.
Therefore I would rather recommend to call the command
..._FE_CALLBACK_VHF_ENABLE.
What do you think?
I am just about to send out a patch for the fc0013 tuner, and since this tuner
has a lot in common with the fc0012, I intend to put the callback definition
into a separate fc001x-common.h header. I just like to know if you have any
objections me renaming the callback command.
Cheers,
Hans-Frieder
> +
> +
> +static int rtl2832u_fc0012_tuner_callback(struct dvb_usb_device *d,
> + int cmd, int arg)
> +{
> + int ret;
> + u8 val;
> +
> + deb_info("%s cmd=%d arg=%d", __func__, cmd, arg);
> + switch (cmd) {
> + case FC0012_FE_CALLBACK_UHF_ENABLE:
> + /* set output values */
> +
> + ret = rtl28xx_rd_reg(d, SYS_GPIO_DIR, &val);
> + if (ret)
> + goto err;
> +
> + val &= 0xbf;
> +
> + ret = rtl28xx_wr_reg(d, SYS_GPIO_DIR, val);
> + if (ret)
> + goto err;
> +
> +
> + ret = rtl28xx_rd_reg(d, SYS_GPIO_OUT_EN, &val);
> + if (ret)
> + goto err;
> +
> + val |= 0x40;
> +
> + ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_EN, val);
> + if (ret)
> + goto err;
> +
> +
> + ret = rtl28xx_rd_reg(d, SYS_GPIO_OUT_VAL, &val);
> + if (ret)
> + goto err;
> +
> + if (arg)
> + val &= 0xbf; /* set GPIO6 low */
> + else
> + val |= 0x40; /* set GPIO6 high */
> +
> +
> + ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_VAL, val);
> + if (ret)
> + goto err;
> + break;
> + default:
> + ret = -EINVAL;
> + goto err;
> + }
> + return 0;
> +
> +err:
> + err("%s: failed=%d", __func__, ret);
> +
> return ret;
> }
>
Hans-Frieder Vogt e-mail: hfvogt <at> gmx .dot. net
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html