On 07.05.2012 09:59, Antti Palosaari wrote:
> Good morning!
> Comments below.
>
> On 06.05.2012 15:46, Thomas Mair wrote:
>> Hi everyone,
>>
>> this is the first complete version of the rtl2832 demod driver. I
>> splitted the patches in three parts:
>> 1. changes in the dvb-usb part (dvb_usb_rtl28xxu)
>> 2. demod driver (rtl2832)
>> 3. tuner driver (fc0012)
>>
>> - added tuner probing with log output
>> - added callback for tuners to change UHF/VHF band
>> - moved and renamed tuner enums to own header file
>> - supported devices:
>> - Terratec Cinergy T Stick Black
>> - G-Tek Electronics Group Lifeview LV5TDLX DVB-T [RTL2832U]
>>
>> Signed-off-by: Thomas Mair<[email protected]>
>> ---
>> drivers/media/dvb/dvb-usb/rtl28xxu.c | 604
>> ++++++++++++++++++++++-----
>> drivers/media/dvb/dvb-usb/rtl28xxu.h | 19 -
>> drivers/media/dvb/dvb-usb/rtl28xxu_tuners.h | 42 ++
>> 3 files changed, 544 insertions(+), 121 deletions(-)
>> create mode 100644 drivers/media/dvb/dvb-usb/rtl28xxu_tuners.h
>>
>> diff --git a/drivers/media/dvb/dvb-usb/rtl28xxu.c
>> b/drivers/media/dvb/dvb-usb/rtl28xxu.c
>> index 8f4736a..00bd712 100644
>> --- a/drivers/media/dvb/dvb-usb/rtl28xxu.c
>> +++ b/drivers/media/dvb/dvb-usb/rtl28xxu.c
>> @@ -3,6 +3,7 @@
>> *
>> * Copyright (C) 2009 Antti Palosaari<[email protected]>
>> * Copyright (C) 2011 Antti Palosaari<[email protected]>
>> + * Copyright (C) 2012 Thomas Mair<[email protected]>
>> *
>> * This program is free software; you can redistribute it and/or modify
>> * it under the terms of the GNU General Public License as published by
>> @@ -20,17 +21,20 @@
>> */
>>
>> #include "rtl28xxu.h"
>> +#include "rtl28xxu_tuners.h"
>>
>> #include "rtl2830.h"
>> +#include "rtl2832.h"
>>
>> #include "qt1010.h"
>> #include "mt2060.h"
>> #include "mxl5005s.h"
>> +#include "fc0012.h"
>> +
>>
>> -/* debug */
>> static int dvb_usb_rtl28xxu_debug;
>> module_param_named(debug, dvb_usb_rtl28xxu_debug, int, 0644);
>> -MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS);
>> +MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
> Why you changed that at all?
> And it is DVB USB driver, not frontend (demodulator), as it now says.
Ok that was a bad idea. I'll revert that.
>> DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
>>
>> static int rtl28xxu_ctrl_msg(struct dvb_usb_device *d, struct
>> rtl28xxu_req *req)
>> @@ -76,11 +80,11 @@ static int rtl28xxu_ctrl_msg(struct dvb_usb_device
>> *d, struct rtl28xxu_req *req)
>>
>> return ret;
>> err:
>> - deb_info("%s: failed=%d\n", __func__, ret);
>> + deb_info("%s: failed=%d", __func__, ret);
>
> Why you have removed new line from all the existing debugs?
>
>> return ret;
>> }
>>
>> -static int rtl2831_wr_regs(struct dvb_usb_device *d, u16 reg, u8 *val, int
>> len)
>> +static int rtl28xx_wr_regs(struct dvb_usb_device *d, u16 reg, u8 *val, int
>> len)
>
> That's renaming OK, my mistake originally...
>
>> {
>> struct rtl28xxu_req req;
>>
>> @@ -98,7 +102,7 @@ static int rtl2831_wr_regs(struct dvb_usb_device
>> *d, u16 reg, u8 *val, int len)
>> return rtl28xxu_ctrl_msg(d,&req);
>> }
>>
>> -static int rtl2831_rd_regs(struct dvb_usb_device *d, u16 reg, u8 *val, int
>> len)
>> +static int rtl28xx_rd_regs(struct dvb_usb_device *d, u16 reg, u8 *val, int
>> len)
>> {
>> struct rtl28xxu_req req;
>>
>> @@ -116,14 +120,14 @@ static int rtl2831_rd_regs(struct dvb_usb_device
>> *d, u16 reg, u8 *val, int len)
>> return rtl28xxu_ctrl_msg(d,&req);
>> }
>>
>> -static int rtl2831_wr_reg(struct dvb_usb_device *d, u16 reg, u8 val)
>> +static int rtl28xx_wr_reg(struct dvb_usb_device *d, u16 reg, u8 val)
>> {
>> - return rtl2831_wr_regs(d, reg,&val, 1);
>> + return rtl28xx_wr_regs(d, reg,&val, 1);
>> }
>>
>> -static int rtl2831_rd_reg(struct dvb_usb_device *d, u16 reg, u8 *val)
>> +static int rtl28xx_rd_reg(struct dvb_usb_device *d, u16 reg, u8 *val)
>> {
>> - return rtl2831_rd_regs(d, reg, val, 1);
>> + return rtl28xx_rd_regs(d, reg, val, 1);
>> }
>>
>> /* I2C */
>> @@ -297,7 +301,7 @@ static int rtl2831u_frontend_attach(struct
>> dvb_usb_adapter *adap)
>> /* for QT1010 tuner probe */
>> struct rtl28xxu_req req_qt1010 = { 0x0fc4, CMD_I2C_RD, 1, buf };
>>
>> - deb_info("%s:\n", __func__);
>> + deb_info("%s:", __func__);
>>
>> /*
>> * RTL2831U GPIOs
>> @@ -308,12 +312,13 @@ static int rtl2831u_frontend_attach(struct
>> dvb_usb_adapter *adap)
>> */
>>
>> /* GPIO direction */
>> - ret = rtl2831_wr_reg(adap->dev, SYS_GPIO_DIR, 0x0a);
>> + ret = rtl28xx_wr_reg(adap->dev, SYS_GPIO_DIR, 0x0a);
>> if (ret)
>> goto err;
>>
>> +
>> /* enable as output GPIO0, GPIO2, GPIO4 */
>> - ret = rtl2831_wr_reg(adap->dev, SYS_GPIO_OUT_EN, 0x15);
>> + ret = rtl28xx_wr_reg(adap->dev, SYS_GPIO_OUT_EN, 0x15);
>> if (ret)
>> goto err;
>>
>> @@ -330,12 +335,12 @@ static int rtl2831u_frontend_attach(struct
>> dvb_usb_adapter *adap)
>> /* check QT1010 ID(?) register; reg=0f val=2c */
>> ret = rtl28xxu_ctrl_msg(adap->dev,&req_qt1010);
>> if (ret == 0&& buf[0] == 0x2c) {
>> - priv->tuner = TUNER_RTL2830_QT1010;
>> + priv->tuner = TUNER_RTL28XX_QT1010;
>
> The idea why I named it as a TUNER_RTL2830_QT1010 was to map RTL2830 and
> given tuner. It could be nice to identify used demod/tuner combination in
> some cases if there will even be such combination same tuner used for
> multiple RTL28XXU chips.
Ok. Should we use the TUNER_RTL2830/TUNER_RTL2832 approach or the RUNER_RTL28XX?
>> rtl2830_config =&rtl28xxu_rtl2830_qt1010_config;
>> - deb_info("%s: QT1010\n", __func__);
>> + deb_info("%s: QT1010", __func__);
>> goto found;
>> } else {
>> - deb_info("%s: QT1010 probe failed=%d - %02x\n",
>> + deb_info("%s: QT1010 probe failed=%d - %02x",
>> __func__, ret, buf[0]);
>> }
>>
>> @@ -347,20 +352,20 @@ static int rtl2831u_frontend_attach(struct
>> dvb_usb_adapter *adap)
>> /* check MT2060 ID register; reg=00 val=63 */
>> ret = rtl28xxu_ctrl_msg(adap->dev,&req_mt2060);
>> if (ret == 0&& buf[0] == 0x63) {
>> - priv->tuner = TUNER_RTL2830_MT2060;
>> + priv->tuner = TUNER_RTL28XX_MT2060;
>> rtl2830_config =&rtl28xxu_rtl2830_mt2060_config;
>> - deb_info("%s: MT2060\n", __func__);
>> + deb_info("%s: MT2060", __func__);
>> goto found;
>> } else {
>> - deb_info("%s: MT2060 probe failed=%d - %02x\n",
>> + deb_info("%s: MT2060 probe failed=%d - %02x",
>> __func__, ret, buf[0]);
>> }
>>
>> /* assume MXL5005S */
>> ret = 0;
>> - priv->tuner = TUNER_RTL2830_MXL5005S;
>> + priv->tuner = TUNER_RTL28XX_MXL5005S;
>> rtl2830_config =&rtl28xxu_rtl2830_mxl5005s_config;
>> - deb_info("%s: MXL5005S\n", __func__);
>> + deb_info("%s: MXL5005S", __func__);
>> goto found;
>>
>> found:
>> @@ -374,37 +379,143 @@ found:
>>
>> return ret;
>> err:
>> - deb_info("%s: failed=%d\n", __func__, ret);
>> + deb_info("%s: failed=%d", __func__, ret);
>> + return ret;
>> +}
>> +
>> +static struct rtl2832_config rtl28xxu_rtl2832_fc0012_config = {
>> + .i2c_addr = 0x10, /* 0x20 */
>> + .xtal = 28800000,
>> + .if_dvbt = 0,
>> + .tuner = TUNER_RTL28XX_FC0012
>> +};
>> +
>> +
>> +static int rtl2832u_fc0012_tuner_callback(struct dvb_usb_device *d,
>> + int cmd, int arg)
>> +{
>> + int ret;
>> + u8 val;
>> +
>> + deb_info("%s cmd=%d arg=%d", __func__, cmd, arg);
>> + switch (cmd) {
>> + case FC0012_FE_CALLBACK_UHF_ENABLE:
>> + /* set output values */
>> +
>> + ret = rtl28xx_rd_reg(d, SYS_GPIO_DIR,&val);
>> + if (ret)
>> + goto err;
>> +
>> + val&= 0xbf;
>> +
>> + ret = rtl28xx_wr_reg(d, SYS_GPIO_DIR, val);
>> + if (ret)
>> + goto err;
>> +
>> +
>> + ret = rtl28xx_rd_reg(d, SYS_GPIO_OUT_EN,&val);
>> + if (ret)
>> + goto err;
>> +
>> + val |= 0x40;
>> +
>> + ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_EN, val);
>> + if (ret)
>> + goto err;
>> +
>> +
>> + ret = rtl28xx_rd_reg(d, SYS_GPIO_OUT_VAL,&val);
>> + if (ret)
>> + goto err;
>> +
>> + if (arg)
>> + val&= 0xbf; /* set GPIO6 low */
>> + else
>> + val |= 0x40; /* set GPIO6 high */
>> +
>> +
>> + ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_VAL, val);
>> + if (ret)
>> + goto err;
>> + break;
>> + default:
>> + ret = -EINVAL;
>> + goto err;
>> + }
>> + return 0;
>> +
>> +err:
>> + err("%s: failed=%d", __func__, ret);
>> +
>> return ret;
>> }
>
> GPIOs are needed to configure only once. Put that configuration stuff to
> frontend_attach() (or tuner_attach()) and switch only GPIO output (hi/lo)
> here.
Ack.
>> +static int rtl2832u_tuner_callback(struct dvb_usb_device *d, int cmd, int
>> arg)
>> +{
>> + struct rtl28xxu_priv *priv = d->priv;
>> +
>> + switch (priv->tuner) {
>> + case TUNER_RTL28XX_FC0012:
>> + return rtl2832u_fc0012_tuner_callback(d, cmd, arg);
>> + default:
>> + break;
>> + }
>> +
>> + return -ENODEV;
>> +}
>> +
>> +static int rtl2832u_frontend_callback(void *adapter_priv, int component,
>> + int cmd, int arg)
>> +{
>> + struct i2c_adapter *adap = adapter_priv;
>> + struct dvb_usb_device *d = i2c_get_adapdata(adap);
>> +
>> + switch (component) {
>> + case DVB_FRONTEND_COMPONENT_TUNER:
>> + return rtl2832u_tuner_callback(d, cmd, arg);
>> + default:
>> + break;
>> + }
>> +
>> + return -EINVAL;
>> +}
>> +
>> +
>> +
>> +
>> static int rtl2832u_frontend_attach(struct dvb_usb_adapter *adap)
>> {
>> int ret;
>> struct rtl28xxu_priv *priv = adap->dev->priv;
>> - u8 buf[1];
>> + struct rtl2832_config *rtl2832_config;
>> +
>> + u8 buf[2];
>> /* open RTL2832U/RTL2832 I2C gate */
>> struct rtl28xxu_req req_gate_open = {0x0120, 0x0011, 0x0001, "\x18"};
>> /* close RTL2832U/RTL2832 I2C gate */
>> struct rtl28xxu_req req_gate_close = {0x0120, 0x0011, 0x0001, "\x10"};
>> + /* for FC0012 tuner probe */
>> + struct rtl28xxu_req req_fc0012 = {0x00c6, CMD_I2C_RD, 1, buf};
>> + /* for FC0013 tuner probe */
>> + struct rtl28xxu_req req_fc0013 = {0x00c6, CMD_I2C_RD, 1, buf};
>> + /* for MT2266 tuner probe */
>> + struct rtl28xxu_req req_mt2266 = {0x00c0, CMD_I2C_RD, 1, buf};
>> /* for FC2580 tuner probe */
>> struct rtl28xxu_req req_fc2580 = {0x01ac, CMD_I2C_RD, 1, buf};
>> -
>> - deb_info("%s:\n", __func__);
>> -
>> - /* GPIO direction */
>> - ret = rtl2831_wr_reg(adap->dev, SYS_GPIO_DIR, 0x0a);
>> - if (ret)
>> - goto err;
>> -
>> - /* enable as output GPIO0, GPIO2, GPIO4 */
>> - ret = rtl2831_wr_reg(adap->dev, SYS_GPIO_OUT_EN, 0x15);
>> - if (ret)
>> - goto err;
>> -
>> - ret = rtl2831_wr_reg(adap->dev, SYS_DEMOD_CTL, 0xe8);
>> - if (ret)
>> - goto err;
>> + /* for MT2063 tuner probe */
>> + struct rtl28xxu_req req_mt2063 = {0x00c0, CMD_I2C_RD, 1, buf};
>> + /* for MAX3543 tuner probe */
>> + struct rtl28xxu_req req_max3543 = {0x00c0, CMD_I2C_RD, 1, buf};
>> + /* for TUA9001 tuner probe */
>> + struct rtl28xxu_req req_tua9001 = {0x7ec0, CMD_I2C_RD, 2, buf};
>> + /* for MXL5007T tuner probe */
>> + struct rtl28xxu_req req_mxl5007t = {0xd9c0, CMD_I2C_RD, 1, buf};
>> + /* for E4000 tuner probe */
>> + struct rtl28xxu_req req_e4000 = {0x02c8, CMD_I2C_RD, 1, buf};
>> + /* for TDA18272 tuner probe */
>> + struct rtl28xxu_req req_tda18272 = {0x00c0, CMD_I2C_RD, 2, buf};
>> +
>> + deb_info("%s:", __func__);
>>
>> /*
>> * Probe used tuner. We need to know used tuner before demod attach
>> @@ -416,15 +527,96 @@ static int rtl2832u_frontend_attach(struct
>> dvb_usb_adapter *adap)
>> if (ret)
>> goto err;
>>
>> + priv->tuner = TUNER_NONE;
>> +
>> + /* check FC0012 ID register; reg=00 val=a1 */
>> + ret = rtl28xxu_ctrl_msg(adap->dev,&req_fc0012);
>> + if (ret == 0&& buf[0] == 0xa1) {
>> + priv->tuner = TUNER_RTL28XX_FC0012;
>> + rtl2832_config =&rtl28xxu_rtl2832_fc0012_config;
>> + info("%s: FC0012 tuner found", __func__);
>> + goto found;
>> + }
>> +
>> + /* check FC0013 ID register; reg=00 val=a3 */
>> + ret = rtl28xxu_ctrl_msg(adap->dev,&req_fc0013);
>> + if (ret == 0&& buf[0] == 0xa3) {
>> + priv->tuner = TUNER_RTL28XX_FC0013;
>> + rtl2832_config =&rtl28xxu_rtl2832_fc0012_config;
>> + info("%s: FC0013 tuner found", __func__);
>> + goto found;
>> + }
>> +
>> + /* check MT2266 ID register; reg=00 val=85 */
>> + ret = rtl28xxu_ctrl_msg(adap->dev,&req_mt2266);
>> + if (ret == 0&& buf[0] == 0x85) {
>> + priv->tuner = TUNER_RTL28XX_MT2266;
>> + /* TODO implement tuner */
>> + info("%s: MT2266 tuner found", __func__);
>> + goto found;
>> + }
>> +
>> /* check FC2580 ID register; reg=01 val=56 */
>> ret = rtl28xxu_ctrl_msg(adap->dev,&req_fc2580);
>> if (ret == 0&& buf[0] == 0x56) {
>> - priv->tuner = TUNER_RTL2832_FC2580;
>> - deb_info("%s: FC2580\n", __func__);
>> + priv->tuner = TUNER_RTL28XX_FC2580;
>> + /* TODO implement tuner */
>> + info("%s: FC2580 tuner found", __func__);
>> + goto found;
>> + }
>> +
>> + /* check MT2063 ID register; reg=00 val=9e || 9c */
>> + ret = rtl28xxu_ctrl_msg(adap->dev,&req_mt2063);
>> + if (ret == 0&& (buf[0] == 0x9e || buf[0] == 0x9c)) {
>> + priv->tuner = TUNER_RTL28XX_MT2063;
>> + /* TODO implement tuner */
>> + info("%s: MT2063 tuner found", __func__);
>> + goto found;
>> + }
>> +
>> + /* check MAX3543 ID register; reg=00 val=38 */
>> + ret = rtl28xxu_ctrl_msg(adap->dev,&req_max3543);
>> + if (ret == 0&& buf[0] == 0x38) {
>> + priv->tuner = TUNER_RTL28XX_MAX3543;
>> + /* TODO implement tuner */
>> + info("%s: MAX3534 tuner found", __func__);
>> + goto found;
>> + }
>> +
>> + /* check TUA9001 ID register; reg=7e val=2328 */
>> + ret = rtl28xxu_ctrl_msg(adap->dev,&req_tua9001);
>> + if (ret == 0&& buf[0] == 0x23&& buf[1] == 0x28) {
>> + priv->tuner = TUNER_RTL28XX_TUA9001;
>> + /* TODO implement tuner */
>> + info("%s: TUA9001 tuner found", __func__);
>> + goto found;
>> + }
>> +
>> + /* check MXL5007R ID register; reg=d9 val=14 */
>> + ret = rtl28xxu_ctrl_msg(adap->dev,&req_mxl5007t);
>> + if (ret == 0&& buf[0] == 0x14) {
>> + priv->tuner = TUNER_RTL28XX_MXL5007T;
>> + /* TODO implement tuner */
>> + info("%s: MXL5007T tuner found", __func__);
>> + goto found;
>> + }
>> +
>> + /* check E4000 ID register; reg=02 val=40 */
>> + ret = rtl28xxu_ctrl_msg(adap->dev,&req_e4000);
>> + if (ret == 0&& buf[0] == 0x40) {
>> + priv->tuner = TUNER_RTL28XX_E4000;
>> + /* TODO implement tuner */
>> + info("%s: E4000 tuner found", __func__);
>> + goto found;
>> + }
>> +
>> + /* check TDA18272 ID register; reg=00 val=c760 */
>> + ret = rtl28xxu_ctrl_msg(adap->dev,&req_tda18272);
>> + if (ret == 0&& (buf[0] == 0xc7 || buf[1] == 0x60)) {
>> + priv->tuner = TUNER_RTL28XX_TDA18272;
>> + /* TODO implement tuner */
>> + info("%s: TDA18272 tuner found", __func__);
>> goto found;
>> - } else {
>> - deb_info("%s: FC2580 probe failed=%d - %02x\n",
>> - __func__, ret, buf[0]);
>> }
>>
>> /* close demod I2C gate */
>> @@ -432,7 +624,9 @@ static int rtl2832u_frontend_attach(struct
>> dvb_usb_adapter *adap)
>> if (ret)
>> goto err;
>>
>> +
>> /* tuner not found */
>> + deb_info("No compatible tuner found");
>> ret = -ENODEV;
>> goto err;
>>
>> @@ -443,11 +637,20 @@ found:
>> goto err;
>>
>> /* attach demodulator */
>> - /* TODO: */
>> + adap->fe_adap[0].fe = dvb_attach(rtl2832_attach, rtl2832_config,
>> + &adap->dev->i2c_adap);
>> + if (adap->fe_adap[0].fe == NULL) {
>> + ret = -ENODEV;
>> + goto err;
>> + }
>> +
>> + /* set fe callbacks */
>> + adap->fe_adap[0].fe->callback = rtl2832u_frontend_callback;
>>
>> return ret;
>> +
>> err:
>> - deb_info("%s: failed=%d\n", __func__, ret);
>> + deb_info("%s: failed=%d", __func__, ret);
>> return ret;
>> }
>>
>> @@ -484,22 +687,22 @@ static int rtl2831u_tuner_attach(struct
>> dvb_usb_adapter *adap)
>> struct i2c_adapter *rtl2830_tuner_i2c;
>> struct dvb_frontend *fe;
>>
>> - deb_info("%s:\n", __func__);
>> + deb_info("%s:", __func__);
>>
>> /* use rtl2830 driver I2C adapter, for more info see rtl2830 driver */
>> rtl2830_tuner_i2c = rtl2830_get_tuner_i2c_adapter(adap->fe_adap[0].fe);
>>
>> switch (priv->tuner) {
>> - case TUNER_RTL2830_QT1010:
>> + case TUNER_RTL28XX_QT1010:
>> fe = dvb_attach(qt1010_attach, adap->fe_adap[0].fe,
>> rtl2830_tuner_i2c,&rtl28xxu_qt1010_config);
>> break;
>> - case TUNER_RTL2830_MT2060:
>> + case TUNER_RTL28XX_MT2060:
>> fe = dvb_attach(mt2060_attach, adap->fe_adap[0].fe,
>> rtl2830_tuner_i2c,&rtl28xxu_mt2060_config,
>> 1220);
>> break;
>> - case TUNER_RTL2830_MXL5005S:
>> + case TUNER_RTL28XX_MXL5005S:
>> fe = dvb_attach(mxl5005s_attach, adap->fe_adap[0].fe,
>> rtl2830_tuner_i2c,&rtl28xxu_mxl5005s_config);
>> break;
>> @@ -515,7 +718,7 @@ static int rtl2831u_tuner_attach(struct
>> dvb_usb_adapter *adap)
>>
>> return 0;
>> err:
>> - deb_info("%s: failed=%d\n", __func__, ret);
>> + deb_info("%s: failed=%d", __func__, ret);
>> return ret;
>> }
>>
>> @@ -525,12 +728,13 @@ static int rtl2832u_tuner_attach(struct
>> dvb_usb_adapter *adap)
>> struct rtl28xxu_priv *priv = adap->dev->priv;
>> struct dvb_frontend *fe;
>>
>> - deb_info("%s:\n", __func__);
>> + deb_info("%s:", __func__);
>>
>> switch (priv->tuner) {
>> - case TUNER_RTL2832_FC2580:
>> - /* TODO: */
>> - fe = NULL;
>> + case TUNER_RTL28XX_FC0012:
>> + fe = dvb_attach(fc0012_attach, adap->fe_adap[0].fe,
>> + &adap->dev->i2c_adap, 0xc6>>1, FC_XTAL_28_8_MHZ);
>> + return 0;
>> break;
>> default:
>> fe = NULL;
>> @@ -544,18 +748,18 @@ static int rtl2832u_tuner_attach(struct
>> dvb_usb_adapter *adap)
>>
>> return 0;
>> err:
>> - deb_info("%s: failed=%d\n", __func__, ret);
>> + deb_info("%s: failed=%d", __func__, ret);
>> return ret;
>> }
>>
>> -static int rtl28xxu_streaming_ctrl(struct dvb_usb_adapter *adap , int onoff)
>> +static int rtl2831u_streaming_ctrl(struct dvb_usb_adapter *adap , int onoff)
>> {
>> int ret;
>> u8 buf[2], gpio;
>>
>> - deb_info("%s: onoff=%d\n", __func__, onoff);
>> + deb_info("%s: onoff=%d", __func__, onoff);
>>
>> - ret = rtl2831_rd_reg(adap->dev, SYS_GPIO_OUT_VAL,&gpio);
>> + ret = rtl28xx_rd_reg(adap->dev, SYS_GPIO_OUT_VAL,&gpio);
>> if (ret)
>> goto err;
>>
>> @@ -569,43 +773,213 @@ static int rtl28xxu_streaming_ctrl(struct
>> dvb_usb_adapter *adap , int onoff)
>> gpio&= (~0x04); /* LED off */
>> }
>>
>> - ret = rtl2831_wr_reg(adap->dev, SYS_GPIO_OUT_VAL, gpio);
>> + ret = rtl28xx_wr_reg(adap->dev, SYS_GPIO_OUT_VAL, gpio);
>> if (ret)
>> goto err;
>>
>> - ret = rtl2831_wr_regs(adap->dev, USB_EPA_CTL, buf, 2);
>> + ret = rtl28xx_wr_regs(adap->dev, USB_EPA_CTL, buf, 2);
>> if (ret)
>> goto err;
>>
>> return ret;
>> err:
>> - deb_info("%s: failed=%d\n", __func__, ret);
>> + deb_info("%s: failed=%d", __func__, ret);
>> return ret;
>> }
>>
>> -static int rtl28xxu_power_ctrl(struct dvb_usb_device *d, int onoff)
>> +static int rtl2832u_streaming_ctrl(struct dvb_usb_adapter *adap , int onoff)
>> +{
>> + int ret;
>> + u8 buf[2];
>> +
>> + deb_info("%s: onoff=%d", __func__, onoff);
>> +
>> +
>> + if (onoff) {
>> + buf[0] = 0x00;
>> + buf[1] = 0x00;
>> + } else {
>> + buf[0] = 0x10; /* stall EPA */
>> + buf[1] = 0x02; /* reset EPA */
>> + }
>> +
>> + ret = rtl28xx_wr_regs(adap->dev, USB_EPA_CTL, buf, 2);
>> + if (ret)
>> + goto err;
>> +
>> + return ret;
>> +err:
>> + deb_info("%s: failed=%d", __func__, ret);
>> + return ret;
>> +}
>
> It is ~same function that existing one but without LED GPIO. Hmmm, dunno what
> to do. Maybe it is OK still as switching "random" GPIOs during streaming
> control is not good idea.
I know. I had the same thougths and could not come up with a more elegant idea.
Maybe here the TUNER_RTL2832 definition could be used. But that is too not the
ideal solution I guess.
>> +
>> +
>> +static int rtl2832u_power_ctrl(struct dvb_usb_device *d, int onoff)
>> +{
>> + int ret;
>> + struct rtl28xxu_req req;
>> + u8 val;
>> +
>> + deb_info("%s: onoff=%d", __func__, onoff);
>> +
>> + if (onoff) {
>> + /* set output values */
>> + ret = rtl28xx_rd_reg(d, SYS_GPIO_OUT_VAL,&val);
>> + if (ret)
>> + goto err;
>> +
>> + val |= 0x08;
>> + val&= 0xef;
>> +
>> + ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_VAL, val);
>> + if (ret)
>> + goto err;
>> +
>> + /* enable as output GPIO3 */
>> + ret = rtl28xx_rd_reg(d, SYS_GPIO_OUT_EN,&val);
>> + if (ret)
>> + goto err;
>> +
>> + val |= 0x08;
>> +
>> + ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_EN, val);
>> + if (ret)
>> + goto err;
>> +
>> + /* demod_ctl_1 */
>> + ret = rtl28xx_rd_reg(d, SYS_DEMOD_CTL1,&val);
>> + if (ret)
>> + goto err;
>> +
>> + val&= 0xef;
>> +
>> + ret = rtl28xx_wr_reg(d, SYS_DEMOD_CTL1, val);
>> + if (ret)
>> + goto err;
>> +
>> + /* demod control */
>> + /* PLL enable */
>> + ret = rtl28xx_rd_reg(d, SYS_DEMOD_CTL,&val);
>> + if (ret)
>> + goto err;
>> +
>> + /* bit 7 to 1 */
>> + val |= 0x80;
>> +
>> + ret = rtl28xx_wr_reg(d, SYS_DEMOD_CTL, val);
>> + if (ret)
>> + goto err;
>> +
>> + /* demod HW reset */
>> + ret = rtl28xx_rd_reg(d, SYS_DEMOD_CTL,&val);
>> + if (ret)
>> + goto err;
>> + /* bit 5 to 0 */
>> + val&= 0xdf;
>> +
>> + ret = rtl28xx_wr_reg(d, SYS_DEMOD_CTL, val);
>> + if (ret)
>> + goto err;
>> +
>> + ret = rtl28xx_rd_reg(d, SYS_DEMOD_CTL,&val);
>> + if (ret)
>> + goto err;
>> +
>> + val |= 0x20;
>> +
>> + ret = rtl28xx_wr_reg(d, SYS_DEMOD_CTL, val);
>> + if (ret)
>> + goto err;
>> +
>> + /* set page cache to 0 */
>> + req.index = 0x0;
>> + req.value = 0x20 + (1<<8);
>> + req.data =&val;
>> + req.size = 1;
>> + ret = rtl28xxu_ctrl_msg(d,&req);
>> + if (ret)
>> + goto err;
>
> This looks weird as you write demod register. Is that really needed?
>
> If you has some problems I suspect those are coming from the fact page cached
> by the driver isdifferent than page used by chip. Likely demod is reseted and
> page is 0 after that.
>
> If you really have seen some problems then set page 0 in demod sleep. Or set
> page directly to that driver priv.
I'll check that.
>> +
>> +
>> + mdelay(5);
>> +
>> + /*enable ADC_Q and ADC_I */
>> + ret = rtl28xx_rd_reg(d, SYS_DEMOD_CTL,&val);
>> + if (ret)
>> + goto err;
>> +
>> + val |= 0x48;
>> +
>> + ret = rtl28xx_wr_reg(d, SYS_DEMOD_CTL, val);
>> + if (ret)
>> + goto err;
>> +
>> +
>> + } else {
>> + /* demod_ctl_1 */
>> + ret = rtl28xx_rd_reg(d, SYS_DEMOD_CTL1,&val);
>> + if (ret)
>> + goto err;
>> +
>> + val |= 0x0c;
>> +
>> + ret = rtl28xx_wr_reg(d, SYS_DEMOD_CTL1, val);
>> + if (ret)
>> + goto err;
>> +
>> + /* set output values */
>> + ret = rtl28xx_rd_reg(d, SYS_GPIO_OUT_VAL,&val);
>> + if (ret)
>> + goto err;
>> +
>> + val |= 0x10;
>> +
>> + ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_VAL, val);
>> + if (ret)
>> + goto err;
>> +
>> + /* demod control */
>> + ret = rtl28xx_rd_reg(d, SYS_DEMOD_CTL,&val);
>> + if (ret)
>> + goto err;
>> +
>> + val&= 0x37;
>> +
>> + ret = rtl28xx_wr_reg(d, SYS_DEMOD_CTL, val);
>> + if (ret)
>> + goto err;
>> +
>> + }
>> +
>> + return ret;
>> +err:
>> + deb_info("%s: failed=%d", __func__, ret);
>> + return ret;
>> +}
>> +
>> +static int rtl2831u_power_ctrl(struct dvb_usb_device *d, int onoff)
>> {
>> int ret;
>> u8 gpio, sys0;
>>
>> - deb_info("%s: onoff=%d\n", __func__, onoff);
>> + deb_info("%s: onoff=%d", __func__, onoff);
>>
>> /* demod adc */
>> - ret = rtl2831_rd_reg(d, SYS_SYS0,&sys0);
>> + ret = rtl28xx_rd_reg(d, SYS_SYS0,&sys0);
>> if (ret)
>> goto err;
>>
>> /* tuner power, read GPIOs */
>> - ret = rtl2831_rd_reg(d, SYS_GPIO_OUT_VAL,&gpio);
>> + ret = rtl28xx_rd_reg(d, SYS_GPIO_OUT_VAL,&gpio);
>> if (ret)
>> goto err;
>>
>> - deb_info("%s: RD SYS0=%02x GPIO_OUT_VAL=%02x\n", __func__, sys0, gpio);
>> + deb_info("%s: RD SYS0=%02x GPIO_OUT_VAL=%02x", __func__, sys0, gpio);
>>
>> if (onoff) {
>> gpio |= 0x01; /* GPIO0 = 1 */
>> gpio&= (~0x10); /* GPIO4 = 0 */
>> - sys0 = sys0& 0x0f;
>> + sys0 = sys0& 0x0f; /* enable demod adc */
>> sys0 |= 0xe0;
>> } else {
>> gpio&= (~0x01); /* GPIO0 = 0 */
>> @@ -613,21 +987,21 @@ static int rtl28xxu_power_ctrl(struct
>> dvb_usb_device *d, int onoff)
>> sys0 = sys0& (~0xc0);
>> }
>>
>> - deb_info("%s: WR SYS0=%02x GPIO_OUT_VAL=%02x\n", __func__, sys0, gpio);
>> + deb_info("%s: WR SYS0=%02x GPIO_OUT_VAL=%02x", __func__, sys0, gpio);
>>
>> /* demod adc */
>> - ret = rtl2831_wr_reg(d, SYS_SYS0, sys0);
>> + ret = rtl28xx_wr_reg(d, SYS_SYS0, sys0);
>> if (ret)
>> goto err;
>>
>> /* tuner power, write GPIOs */
>> - ret = rtl2831_wr_reg(d, SYS_GPIO_OUT_VAL, gpio);
>> + ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_VAL, gpio);
>> if (ret)
>> goto err;
>>
>> return ret;
>> err:
>> - deb_info("%s: failed=%d\n", __func__, ret);
>> + deb_info("%s: failed=%d", __func__, ret);
>> return ret;
>> }
>>
>> @@ -657,7 +1031,7 @@ static int rtl2831u_rc_query(struct dvb_usb_device *d)
>> /* init remote controller */
>> if (!priv->rc_active) {
>> for (i = 0; i< ARRAY_SIZE(rc_nec_tab); i++) {
>> - ret = rtl2831_wr_reg(d, rc_nec_tab[i].reg,
>> + ret = rtl28xx_wr_reg(d, rc_nec_tab[i].reg,
>> rc_nec_tab[i].val);
>> if (ret)
>> goto err;
>> @@ -665,7 +1039,7 @@ static int rtl2831u_rc_query(struct dvb_usb_device *d)
>> priv->rc_active = true;
>> }
>>
>> - ret = rtl2831_rd_regs(d, SYS_IRRC_RP, buf, 5);
>> + ret = rtl28xx_rd_regs(d, SYS_IRRC_RP, buf, 5);
>> if (ret)
>> goto err;
>>
>> @@ -687,22 +1061,24 @@ static int rtl2831u_rc_query(struct dvb_usb_device *d)
>>
>> rc_keydown(d->rc_dev, rc_code, 0);
>>
>> - ret = rtl2831_wr_reg(d, SYS_IRRC_SR, 1);
>> + ret = rtl28xx_wr_reg(d, SYS_IRRC_SR, 1);
>> if (ret)
>> goto err;
>>
>> /* repeated intentionally to avoid extra keypress */
>> - ret = rtl2831_wr_reg(d, SYS_IRRC_SR, 1);
>> + ret = rtl28xx_wr_reg(d, SYS_IRRC_SR, 1);
>> if (ret)
>> goto err;
>> }
>>
>> return ret;
>> err:
>> - deb_info("%s: failed=%d\n", __func__, ret);
>> + deb_info("%s: failed=%d", __func__, ret);
>> return ret;
>> }
>>
>> +/* unused for now */
>> +#if 0
>> static int rtl2832u_rc_query(struct dvb_usb_device *d)
>> {
>> int ret, i;
>> @@ -729,7 +1105,7 @@ static int rtl2832u_rc_query(struct dvb_usb_device *d)
>> /* init remote controller */
>> if (!priv->rc_active) {
>> for (i = 0; i< ARRAY_SIZE(rc_nec_tab); i++) {
>> - ret = rtl2831_wr_reg(d, rc_nec_tab[i].reg,
>> + ret = rtl28xx_wr_reg(d, rc_nec_tab[i].reg,
>> rc_nec_tab[i].val);
>> if (ret)
>> goto err;
>> @@ -737,37 +1113,40 @@ static int rtl2832u_rc_query(struct dvb_usb_device *d)
>> priv->rc_active = true;
>> }
>>
>> - ret = rtl2831_rd_reg(d, IR_RX_IF,&buf[0]);
>> + ret = rtl28xx_rd_reg(d, IR_RX_IF,&buf[0]);
>> if (ret)
>> goto err;
>>
>> if (buf[0] != 0x83)
>> goto exit;
>>
>> - ret = rtl2831_rd_reg(d, IR_RX_BC,&buf[0]);
>> + ret = rtl28xx_rd_reg(d, IR_RX_BC,&buf[0]);
>> if (ret)
>> goto err;
>>
>> len = buf[0];
>> - ret = rtl2831_rd_regs(d, IR_RX_BUF, buf, len);
>> + ret = rtl28xx_rd_regs(d, IR_RX_BUF, buf, len);
>>
>> /* TODO: pass raw IR to Kernel IR decoder */
>>
>> - ret = rtl2831_wr_reg(d, IR_RX_IF, 0x03);
>> - ret = rtl2831_wr_reg(d, IR_RX_BUF_CTRL, 0x80);
>> - ret = rtl2831_wr_reg(d, IR_RX_CTRL, 0x80);
>> + ret = rtl28xx_wr_reg(d, IR_RX_IF, 0x03);
>> + ret = rtl28xx_wr_reg(d, IR_RX_BUF_CTRL, 0x80);
>> + ret = rtl28xx_wr_reg(d, IR_RX_CTRL, 0x80);
>>
>> exit:
>> return ret;
>> err:
>> - deb_info("%s: failed=%d\n", __func__, ret);
>> + deb_info("%s: failed=%d", __func__, ret);
>> return ret;
>> }
>> +#endif
>>
>> enum rtl28xxu_usb_table_entry {
>> RTL2831U_0BDA_2831,
>> RTL2831U_14AA_0160,
>> RTL2831U_14AA_0161,
>> + RTL2832U_0CCD_00A9,
>> + RTL2832U_1F4D_B803,
>> };
>>
>> static struct usb_device_id rtl28xxu_table[] = {
>> @@ -780,6 +1159,10 @@ static struct usb_device_id rtl28xxu_table[] = {
>> USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_FREECOM_DVBT_2)},
>>
>> /* RTL2832U */
>> + [RTL2832U_0CCD_00A9] = {
>> + USB_DEVICE(USB_VID_TERRATEC,
>> USB_PID_TERRATEC_CINERGY_T_STICK_BLACK)},
>> + [RTL2832U_1F4D_B803] = {
>> + USB_DEVICE(USB_VID_GTEK, USB_PID_GTEK)},
>> {} /* terminating entry */
>> };
>>
>> @@ -802,7 +1185,7 @@ static struct dvb_usb_device_properties
>> rtl28xxu_properties[] = {
>> {
>> .frontend_attach = rtl2831u_frontend_attach,
>> .tuner_attach = rtl2831u_tuner_attach,
>> - .streaming_ctrl = rtl28xxu_streaming_ctrl,
>> + .streaming_ctrl = rtl2831u_streaming_ctrl,
>> .stream = {
>> .type = USB_BULK,
>> .count = 6,
>> @@ -818,7 +1201,7 @@ static struct dvb_usb_device_properties
>> rtl28xxu_properties[] = {
>> }
>> },
>>
>> - .power_ctrl = rtl28xxu_power_ctrl,
>> + .power_ctrl = rtl2831u_power_ctrl,
>>
>> .rc.core = {
>> .protocol = RC_TYPE_NEC,
>> @@ -864,11 +1247,11 @@ static struct dvb_usb_device_properties
>> rtl28xxu_properties[] = {
>> {
>> .frontend_attach = rtl2832u_frontend_attach,
>> .tuner_attach = rtl2832u_tuner_attach,
>> - .streaming_ctrl = rtl28xxu_streaming_ctrl,
>> + .streaming_ctrl = rtl2832u_streaming_ctrl,
>> .stream = {
>> .type = USB_BULK,
>> - .count = 6,
>> - .endpoint = 0x81,
>> + .count = 10,
>> + .endpoint = 0x01,
>
> And what is reason behind that change?
> EP 0x81 == 0x01.
> Increasing buffers from 6 to 10 should not be needed for DVB-T stream (20
> Mbit/sec). If you set it too small you will see very soon erros in the
> picture.
Conviced ;) Will be reverted.
>> .u = {
>> .bulk = {
>> .buffersize = 8*512,
>> @@ -880,23 +1263,32 @@ static struct dvb_usb_device_properties
>> rtl28xxu_properties[] = {
>> }
>> },
>>
>> - .power_ctrl = rtl28xxu_power_ctrl,
>> + .power_ctrl = rtl2832u_power_ctrl,
>>
>> - .rc.core = {
>> + /*.rc.core = {
>> .protocol = RC_TYPE_NEC,
>> .module_name = "rtl28xxu",
>> .rc_query = rtl2832u_rc_query,
>> .rc_interval = 400,
>> .allowed_protos = RC_TYPE_NEC,
>> .rc_codes = RC_MAP_EMPTY,
>> - },
>> + },*/
>>
>> .i2c_algo =&rtl28xxu_i2c_algo,
>>
>> - .num_device_descs = 0, /* disabled as no support for RTL2832 */
>> + .num_device_descs = 2,
>> .devices = {
>> {
>> - .name = "Realtek RTL2832U reference design",
>> + .name = "Terratec Cinergy T Stick Black",
>> + .warm_ids = {
>> + &rtl28xxu_table[RTL2832U_0CCD_00A9],
>> + },
>> + },
>> + {
>> + .name = "G-Tek Electronics Group Lifeview LV5TDLX DVB-T
>> [RTL2832U]",
>> + .warm_ids = {
>> + &rtl28xxu_table[RTL2832U_1F4D_B803],
>> + },
>> },
>> }
>> },
>> @@ -907,10 +1299,11 @@ static int rtl28xxu_probe(struct usb_interface *intf,
>> const struct usb_device_id *id)
>> {
>> int ret, i;
>> + u8 val;
>> int properties_count = ARRAY_SIZE(rtl28xxu_properties);
>> struct dvb_usb_device *d;
>>
>> - deb_info("%s: interface=%d\n", __func__,
>> + deb_info("%s: interface=%d", __func__,
>> intf->cur_altsetting->desc.bInterfaceNumber);
>>
>> if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
>> @@ -926,22 +1319,31 @@ static int rtl28xxu_probe(struct usb_interface *intf,
>> if (ret)
>> goto err;
>>
>> +
>> /* init USB endpoints */
>> - ret = rtl2831_wr_reg(d, USB_SYSCTL_0, 0x09);
>> + ret = rtl28xx_rd_reg(d, USB_SYSCTL_0,&val);
>> + if (ret)
>> + goto err;
>> +
>> + /* enable DMA and Full Packet Mode*/
>> + val |= 0x09;
>> + ret = rtl28xx_wr_reg(d, USB_SYSCTL_0, val);
>> if (ret)
>> goto err;
>>
>> - ret = rtl2831_wr_regs(d, USB_EPA_MAXPKT, "\x00\x02\x00\x00", 4);
>> + /* set EPA maximum packet size to 0x0200 */
>> + ret = rtl28xx_wr_regs(d, USB_EPA_MAXPKT, "\x00\x02\x00\x00", 4);
>> if (ret)
>> goto err;
>>
>> - ret = rtl2831_wr_regs(d, USB_EPA_FIFO_CFG, "\x14\x00\x00\x00", 4);
>> + /* change EPA FIFO length */
>> + ret = rtl28xx_wr_regs(d, USB_EPA_FIFO_CFG, "\x14\x00\x00\x00", 4);
>> if (ret)
>> goto err;
>>
>> return ret;
>> err:
>> - deb_info("%s: failed=%d\n", __func__, ret);
>> + deb_info("%s: failed=%d", __func__, ret);
>> return ret;
>> }
>>
>> @@ -957,8 +1359,6 @@ static int __init rtl28xxu_module_init(void)
>> {
>> int ret;
>>
>> - deb_info("%s:\n", __func__);
>> -
>> ret = usb_register(&rtl28xxu_driver);
>> if (ret)
>> err("usb_register failed=%d", ret);
>> @@ -968,7 +1368,6 @@ static int __init rtl28xxu_module_init(void)
>>
>> static void __exit rtl28xxu_module_exit(void)
>> {
>> - deb_info("%s:\n", __func__);
>>
>> /* deregister this driver from the USB subsystem */
>> usb_deregister(&rtl28xxu_driver);
>> @@ -979,4 +1378,5 @@ module_exit(rtl28xxu_module_exit);
>>
>> MODULE_DESCRIPTION("Realtek RTL28xxU DVB USB driver");
>> MODULE_AUTHOR("Antti Palosaari<[email protected]>");
>> +MODULE_AUTHOR("Thomas Mair<[email protected]>");
>> MODULE_LICENSE("GPL");
>> diff --git a/drivers/media/dvb/dvb-usb/rtl28xxu.h
>> b/drivers/media/dvb/dvb-usb/rtl28xxu.h
>> index 90f3bb4..55f7c50 100644
>> --- a/drivers/media/dvb/dvb-usb/rtl28xxu.h
>> +++ b/drivers/media/dvb/dvb-usb/rtl28xxu.h
>> @@ -84,25 +84,6 @@ enum rtl28xxu_chip_id {
>> CHIP_ID_RTL2832U,
>> };
>>
>> -enum rtl28xxu_tuner {
>> - TUNER_NONE,
>> -
>> - TUNER_RTL2830_QT1010,
>> - TUNER_RTL2830_MT2060,
>> - TUNER_RTL2830_MXL5005S,
>> -
>> - TUNER_RTL2832_MT2266,
>> - TUNER_RTL2832_FC2580,
>> - TUNER_RTL2832_MT2063,
>> - TUNER_RTL2832_MAX3543,
>> - TUNER_RTL2832_TUA9001,
>> - TUNER_RTL2832_MXL5007T,
>> - TUNER_RTL2832_FC0012,
>> - TUNER_RTL2832_E4000,
>> - TUNER_RTL2832_TDA18272,
>> - TUNER_RTL2832_FC0013,
>> -};
>> -
>> struct rtl28xxu_req {
>> u16 value;
>> u16 index;
>> diff --git a/drivers/media/dvb/dvb-usb/rtl28xxu_tuners.h
>> b/drivers/media/dvb/dvb-usb/rtl28xxu_tuners.h
>> new file mode 100644
>> index 0000000..773e603
>> --- /dev/null
>> +++ b/drivers/media/dvb/dvb-usb/rtl28xxu_tuners.h
>> @@ -0,0 +1,42 @@
>> +/*
>> + * Realtek RTL28xxU DVB USB driver
>> + *
>> + * Copyright (C) 2009 Antti Palosaari<[email protected]>
>> + * Copyright (C) 2011 Antti Palosaari<[email protected]>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> along
>> + * with this program; if not, write to the Free Software Foundation,
>> Inc.,
>> + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
>> + */
>> +
>> +#ifndef RTL28XXU_TUNERS_H
>> +#define RTL28XXU_TUNERS_H
>> +
>> +enum rtl28xxu_tuner {
>> + TUNER_NONE,
>> + TUNER_RTL28XX_QT1010,
>> + TUNER_RTL28XX_MT2060,
>> + TUNER_RTL28XX_MT2266,
>> + TUNER_RTL28XX_MT2063,
>> + TUNER_RTL28XX_MAX3543,
>> + TUNER_RTL28XX_TUA9001,
>> + TUNER_RTL28XX_MXL5005S,
>> + TUNER_RTL28XX_MXL5007T,
>> + TUNER_RTL28XX_FC2580,
>> + TUNER_RTL28XX_FC0012,
>> + TUNER_RTL28XX_FC0013,
>> + TUNER_RTL28XX_E4000,
>> + TUNER_RTL28XX_TDA18272,
>> +};
>> +
>> +#endif
>
> I don't see it good idea to export tuners from the DVB-USB-driver to the
> demodulator. Demod drivers should be independent. For the other direction it
> is OK, I mean you can add tuners for demod config (rtl2832.h).
Ok. So the definitions of the tuners would go into the rtl2830.h and rtl2832.h.
> After all, you have done rather much changes. Even such changes that are not
> relevant for the RTL2832 support. One patch per one change is the rule. Also
> that patch serie is wrong order, it will break compilation for example very
> bad when git bisect is taken. It should be done in order first tuner or demod
> driver then DVB-USB-driver.
Sorry for the inconsistent patches. I will go over my changes again and split
them
into smaller chunks, trying to keep the changes to a minimum. That includes to
change
the order of the patches to tuner, demod and finally dvb-usb driver. Thanks for
all
the comments. They really help me getting the driver nice and neat. I will
probably
not be able to do the changes before next weekend.
> regards
> Antti
Regards
Thomas
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html