On 07/31/2012 01:05 PM, Laurent Pinchart wrote: >>>>> What about CSI receivers that can reroute the lanes internally ? We >>>>> would >>>>> need to specify lane indices for each lane then, maybe with something >>>>> like >>>>> >>>>> clock-lane =<0>; >>>>> data-lanes =<2 3 1>; >>>> >>>> Sounds good to me. And the clock-lane could be made optional, as not all >>>> devices would need it. >>>> >>>> However, as far as I can see, there is currently no generic API for >>>> handling this kind of data structure. E.g. number of cells for the >>>> "interrupts" property is specified with an additional >>>> "#interrupt-cells" property. >>>> >>>> It would have been much easier to handle something like: >>>> >>>> data-lanes = <2>, <3>, <1>; >>>> >>>> i.e. an array of the lane indexes. >>> >>> I'm fine with that. >> >> ...on a second thought: shouldn't this be handled by pinctrl? Or is it >> some CSI-2 module internal lane switching, not the global SoC pin function >> configuration? > > On the hardware I came across, it's handled by the CSI2 receiver, not the SoC > pinmux feature.
Same here. Is there any hardware known to mux those MIPI-CSI D-PHY high speed differential signals with general purpose IO pins ? Or are there mostly dedicated pins used ? However, if there are cases the lane configuration is done solely at CSI2 receiver level, there seems little point in involving the pinctrl API. -- Regards, Sylwester -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
