Em Thu, 08 Nov 2012 19:34:14 +0100 Laurent Pinchart <laurent.pinch...@ideasonboard.com> escreveu:
> On Thursday 08 November 2012 19:14:18 Laurent Pinchart wrote: > > Hi Mauro, > > > > Here's the application I've used to test V4L2 dma-buf support with a UVC > > webcam and an Intel GPU supported by the i915 driver. > > > > The kernel code is available in my git tree at > > > > git://linuxtv.org/pinchartl/media.git devel/dma-buf-v10 > > > > (http://git.linuxtv.org/pinchartl/media.git/shortlog/refs/heads/devel/v4l2- > > clock) > > > > Don't forget to enable dma-buf and UVC support when compiling the kernel. > > > > The userspace code is based on the v4l2-drm-example application written by > > Tomasz (the original code is available at > > git://git.infradead.org/users/kmpark/public-apps). I need to clean up my > > modifications to push them back to the repository, in the meantime the code > > is attached to this e-mail. > > > > To compile the application, just run make with the KDIR variable set to the > > path to your Linux kernel tree with the dma-buf patches applied. Don't > > forget to make headers_install in the kernel tree as the Makefile will look > > for headers in $KDIR/usr. > > > > You will need a recent version of libdrm with plane support available. > > 2.4.39 should do. > > > > The following command line will capture VGA YUYV data from the webcam and > > display it on the screen. You need to run it in a console as root without > > the X server running. > > > > ./dmabuf-sharing -M i915 -o 7:3:1600x900 -i /dev/video0 -S 640,480 -f YUYV > > -F YUYV -s 640,480@0,0 -t 640,480@0,0 -b 2 > > I forgot to mention that the -o parameter takes the connector ID, CRTC ID and > mode as parameters. The mode is easy to find, but the connector and CRTC IDs > are a bit more tricky. You can run the modetest application (part of libdrm > but not installed by most distributions, so a manual compilation is needed) > to > dump all CRTC, encoder and connector information to the console. Pick the > connector associated with your display, and the CRTC associated with the > encoder associated with that connector. Got modetest running, but I didn't figure out what of the values below should be used for the -o parameter: trying to load module i915...success. Encoders: id crtc type possible crtcs possible clones 6 3 LVDS 0x00000003 0x00000001 13 0 DAC 0x00000003 0x00000002 15 0 TVDAC 0x00000003 0x00000004 Connectors: id encoder status type size (mm) modes encoders 5 6 connected LVDS 290x180 1 6 modes: name refresh (Hz) hdisp hss hse htot vdisp vss vse vtot) 1280x800 60 1280 1328 1360 1448 800 803 809 823 flags: nhsync, nvsync; type: preferred, driver props: 1 EDID: flags: immutable blob blobs: value: 00ffffffffffff0006af241400000000 01110103801d12780a87f594574f8c27 27505400000001010101010101010101 010101010101ee1b00a8502017303020 360022b410000019ee1b00a850201730 3020360022b410000000000000fe0044 573930398042313333455731000000fe 00000000000000000001010a20200022 2 DPMS: flags: enum enums: On=0 Standby=1 Suspend=2 Off=3 value: 0 7 scaling mode: flags: enum enums: None=0 Full=1 Center=2 Full aspect=3 value: 3 12 0 disconnected VGA 0x0 0 13 14 0 disconnected s-video 0x0 0 15 CRTCs: id fb pos size 3 9 (0,0) (0x0) 1280x800 60 1280 1328 1360 1448 800 803 809 823 flags: nhsync, nvsync; type: preferred, driver props: 4 0 (0,0) (0x0) 0 0 0 0 0 0 0 0 0 flags: ; type: props: Planes: id crtc fb CRTC x,y x,y gamma size Frame buffers: id size pitch > Cheers, Mauro -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
