Convert driver to kernel I2C model. Old DVB proprietary model is
still left there also.
Signed-off-by: Antti Palosaari <cr...@iki.fi>
---
drivers/media/dvb-frontends/Kconfig | 2 +-
drivers/media/dvb-frontends/rtl2830.c | 167 +++++++++++++++++++++++++++++
drivers/media/dvb-frontends/rtl2830.h | 31 ++++++
drivers/media/dvb-frontends/rtl2830_priv.h | 2 +
4 files changed, 201 insertions(+), 1 deletion(-)
diff --git a/drivers/media/dvb-frontends/Kconfig
b/drivers/media/dvb-frontends/Kconfig
index 6c75418..e8827fc 100644
--- a/drivers/media/dvb-frontends/Kconfig
+++ b/drivers/media/dvb-frontends/Kconfig
@@ -443,7 +443,7 @@ config DVB_CXD2820R
config DVB_RTL2830
tristate "Realtek RTL2830 DVB-T"
- depends on DVB_CORE && I2C
+ depends on DVB_CORE && I2C && I2C_MUX
default m if !MEDIA_SUBDRV_AUTOSELECT
help
Say Y when you want to support this frontend.
diff --git a/drivers/media/dvb-frontends/rtl2830.c
b/drivers/media/dvb-frontends/rtl2830.c
index 50e8b63..ec4a19c 100644
--- a/drivers/media/dvb-frontends/rtl2830.c
+++ b/drivers/media/dvb-frontends/rtl2830.c
@@ -767,6 +767,173 @@ static struct dvb_frontend_ops rtl2830_ops = {
.read_signal_strength = rtl2830_read_signal_strength,
};
+/*
+ * I2C gate/repeater logic
+ * We must use unlocked i2c_transfer() here because I2C lock is already taken
+ * by tuner driver. Gate is closed automatically after single I2C xfer.
+ */
+static int rtl2830_select(struct i2c_adapter *adap, void *mux_priv, u32
chan_id)
+{
+ struct i2c_client *client = mux_priv;
+ struct rtl2830_priv *priv = i2c_get_clientdata(client);
+ struct i2c_msg select_reg_page_msg[1] = {
+ {
+ .addr = priv->cfg.i2c_addr,
+ .flags = 0,
+ .len = 2,
+ .buf = "\x00\x01",
+ }
+ };
+ struct i2c_msg gate_open_msg[1] = {
+ {
+ .addr = priv->cfg.i2c_addr,
+ .flags = 0,
+ .len = 2,
+ .buf = "\x01\x08",
+ }
+ };
+ int ret;
+
+ /* select register page */
+ ret = __i2c_transfer(adap, select_reg_page_msg, 1);
+ if (ret != 1) {
+ dev_warn(&client->dev, "i2c write failed %d\n", ret);
+ if (ret >= 0)
+ ret = -EREMOTEIO;
+ goto err;
+ }
+
+ priv->page = 1;
+
+ /* open tuner I2C repeater for 1 xfer, closes automatically */
+ ret = __i2c_transfer(adap, gate_open_msg, 1);
+ if (ret != 1) {
+ dev_warn(&client->dev, "i2c write failed %d\n", ret);
+ if (ret >= 0)
+ ret = -EREMOTEIO;
+ goto err;
+ }
+
+ return 0;
+
+err:
+ dev_dbg(&client->dev, "%s: failed=%d\n", __func__, ret);
+ return ret;
+}
+
+static struct dvb_frontend *rtl2830_get_dvb_frontend(struct i2c_client *client)
+{
+ struct rtl2830_priv *priv = i2c_get_clientdata(client);
+
+ dev_dbg(&client->dev, "\n");
+
+ return &priv->fe;
+}
+
+static struct i2c_adapter *rtl2830_get_i2c_adapter(struct i2c_client *client)
+{
+ struct rtl2830_priv *priv = i2c_get_clientdata(client);
+
+ dev_dbg(&client->dev, "\n");
+
+ return priv->adapter;
+}
+
+static int rtl2830_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct rtl2830_platform_data *pdata = client->dev.platform_data;
+ struct i2c_adapter *i2c = client->adapter;
+ struct rtl2830_priv *priv;
+ int ret;
+ u8 u8tmp;
+
+ dev_dbg(&client->dev, "\n");
+
+ if (pdata == NULL) {
+ ret = -EINVAL;
+ goto err;
+ }
+
+ /* allocate memory for the internal state */
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (priv == NULL) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ /* setup the state */
+ i2c_set_clientdata(client, priv);
+ priv->i2c = i2c;
+ priv->sleeping = true;
+ priv->cfg.i2c_addr = client->addr;
+ priv->cfg.xtal = pdata->clk;
+ priv->cfg.spec_inv = pdata->spec_inv;
+ priv->cfg.vtop = pdata->vtop;
+ priv->cfg.krf = pdata->krf;
+ priv->cfg.agc_targ_val = pdata->agc_targ_val;
+
+ /* check if the demod is there */
+ ret = rtl2830_rd_reg(priv, 0x000, &u8tmp);
+ if (ret)
+ goto err_kfree;
+
+ /* create muxed i2c adapter for tuner */
+ priv->adapter = i2c_add_mux_adapter(client->adapter, &client->dev,
+ client, 0, 0, 0, rtl2830_select, NULL);
+ if (priv->adapter == NULL) {
+ ret = -ENODEV;
+ goto err_kfree;
+ }
+
+ /* create dvb frontend */
+ memcpy(&priv->fe.ops, &rtl2830_ops, sizeof(priv->fe.ops));
+ priv->fe.ops.release = NULL;
+ priv->fe.demodulator_priv = priv;
+
+ /* setup callbacks */
+ pdata->get_dvb_frontend = rtl2830_get_dvb_frontend;
+ pdata->get_i2c_adapter = rtl2830_get_i2c_adapter;
+
+ dev_info(&client->dev, "Realtek RTL2830 successfully attached\n");
+ return 0;
+
+err_kfree:
+ kfree(priv);
+err:
+ dev_dbg(&client->dev, "failed=%d\n", ret);
+ return ret;
+}
+
+static int rtl2830_remove(struct i2c_client *client)
+{
+ struct rtl2830_priv *priv = i2c_get_clientdata(client);
+
+ dev_dbg(&client->dev, "\n");
+
+ i2c_del_mux_adapter(priv->adapter);
+ kfree(priv);
+ return 0;
+}
+
+static const struct i2c_device_id rtl2830_id_table[] = {
+ {"rtl2830", 0},
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, rtl2830_id_table);
+
+static struct i2c_driver rtl2830_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "rtl2830",
+ },
+ .probe = rtl2830_probe,
+ .remove = rtl2830_remove,
+ .id_table = rtl2830_id_table,
+};
+
+module_i2c_driver(rtl2830_driver);
+
MODULE_AUTHOR("Antti Palosaari <cr...@iki.fi>");
MODULE_DESCRIPTION("Realtek RTL2830 DVB-T demodulator driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb-frontends/rtl2830.h
b/drivers/media/dvb-frontends/rtl2830.h
index 3313847..b925ea5 100644
--- a/drivers/media/dvb-frontends/rtl2830.h
+++ b/drivers/media/dvb-frontends/rtl2830.h
@@ -24,6 +24,37 @@
#include <linux/kconfig.h>
#include <linux/dvb/frontend.h>
+struct rtl2830_platform_data {
+ /*
+ * Clock frequency.
+ * Hz
+ * 4000000, 16000000, 25000000, 28800000
+ */
+ u32 clk;
+
+ /*
+ * Spectrum inversion.
+ */
+ bool spec_inv;
+
+ /*
+ */
+ u8 vtop;
+
+ /*
+ */
+ u8 krf;
+
+ /*
+ */
+ u8 agc_targ_val;
+
+ /*
+ */
+ struct dvb_frontend* (*get_dvb_frontend)(struct i2c_client *);
+ struct i2c_adapter* (*get_i2c_adapter)(struct i2c_client *);
+};
+
struct rtl2830_config {
/*
* Demodulator I2C address.
diff --git a/drivers/media/dvb-frontends/rtl2830_priv.h
b/drivers/media/dvb-frontends/rtl2830_priv.h
index fab10ec..1a78351 100644
--- a/drivers/media/dvb-frontends/rtl2830_priv.h
+++ b/drivers/media/dvb-frontends/rtl2830_priv.h
@@ -24,8 +24,10 @@
#include "dvb_frontend.h"
#include "dvb_math.h"
#include "rtl2830.h"
+#include <linux/i2c-mux.h>
struct rtl2830_priv {
+ struct i2c_adapter *adapter;
struct i2c_adapter *i2c;
struct dvb_frontend fe;
struct rtl2830_config cfg;
--
http://palosaari.fi/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
